SCA also provides a model for the assembly of business solutions from collections of individual services, with control over aspects of the solution such as access methods and security.
SCA还为单个服务集合的业务解决方案的组装提供了一个模型，并控制解决方案的各个方面，如访问方法和安全。
The mathematical model of master-slave synchronous winding control system is established here, and the design methods of the system hardware and control method are introduced in detail.
建立了主从式同步卷绕控制系统的数学模型，并详细介绍了控制系统硬件和控制方法的具体设计。
An introduction of the basic principles of the neuron model-free control and the basicdesign methods of the fuzzy controller is given.
介绍了神经元非模型控制的结构和基本原理及模糊控制器的设计的两种基本方法。
A model based control scheme employing computed-torque control has been presented, and its applications in three different path planning methods have also been discussed.
设计了一基于模型的计算力矩控制算法，并深入探讨了其应用于三种不同轨迹规划方法下的控制性能。
Many complicated systems, especially nonlinear dynamic time-variable system, can not be defined by conventional methods which haven't been built effective mathematic model and control method.
有许多复杂的系统是无法用传统方法对它定义，特别是那些非线性的动态时变系统，还不能建立有效的数学模型和控制方法。
The modeling methods of mechanic model, control model, output and input between these two models, and object motion model were given.
给出了机械模型、控制模型和两者间的输入输出，以及目标运动模型的建立方法。
By way of describing the mathematical model and analyzing the transient phenomena of active impact load in power systems, its real-time control methods are discussed.
本文从电力系统有功冲击负荷的数学模型和暂态过程着手，分析和探讨了有功冲击负荷实时控制的基本原理和方法。
This paper also introduces concept of state flow-chart and general methods on judging the integrality of a control system, then expounds the methods by combining the simulated model.
文章还引入了状态流图的概念，对控制系统完整性作出一般性解释，并结合仿真模型阐述了这一方法。
The definition and classification are given for the several existing model-free control (MFC) methods.
给出了无模型控制的定义，并对已存在的无模型控制方法进行了分类。
It is one of the effective methods to introduce intelligent optimization methods to the control system for guiding the design of control systems and identifying parameters of the process model.
为此，把智能优化方法引入到控制系统控制器参数的设计、控制对象的参数辨识中，是当前行之有效的控制系统设计方法之一。
As a complex DEDS, there usually exists especially the curse of dimensionality and the curse of model, the problems of MDP's management and control can not be solved by regular methods.
MDP作为一个复杂的离散事件系统，尤其是对于存在“维数灾”和“模型灾”问题的系统，其管理与控制问题难以用一般的常规方法来解决。
Based on wavelet networks and multiple model adaptive control theories, the identification and control methods for the complicated nonlinear dynamic systems are proposed.
本文以小波网络和多模型理论为基础，对复杂非线性动态系统的辨识和控制方法进行了研究。
Besides, the production organizational form, performance analysis, structure and control strategy of the production line, as well as production line model and research methods were described.
介绍了生产线的生产组织方式，性能分析、构造、控制策略等内部机制，生产线模型及研究手段等。
The dynamic model test shows that this methods achieves good control quality and promote significantly the efficiency of parameter optimization.
动模试验表明，该方法能得到良好的控制品质，且显著提高了参数优化的效率。
The methods of load balance of moment limiting and speed softening mode under torque control model and velocity mode are put forward.
提出了在转矩模式、速度模式下力矩限幅和速度软化方式的负荷平衡方法。
The model of HyGSHPs and traditional GSHPs are built up using program with the ground heat exchanger, supplemental heat rejecter system and the unit model according to various control methods.
以地埋管换热器、辅助散热系统和热泵机组模型依据不同控制方法编程组合成水源辅助散热的复合地源热泵系统和传统地源热泵系统模型。
This model can provide scientific methods for urban water environment programming and non-point source pollution control and management.
该模型可为城市水环境规划、面源控制和管理研究提供科学手段。
Methods 30 Chinese mini-swine were randomly into live groups: model control group, small -, middle -, large-dose group and sham operation group (6 each).
方法中华小型猪30只，随机分成模型对照组，通心络治疗小、中、大剂量组和假手术组，每组6只。
This paper established a control model and proposed the stabilization methods aimed at the characteristic of pharmacokinetics for bolus injection.
本文针对药物动力学的特点，利用控制模型，给出了对其稳定性分析的方法。
Methods 30 Chinese mini-swine were randomly into five groups: model control group, small - , middle - , large-dose group and sham operation group (6 each) .
方法中华小型猪30只，随机分成模型对照组， 通心络治疗小、中和大剂量组和假手术组，每组6只。
METHODS: This experiment included 4 groups: normal control group, asthmatic model group, dexamethasone treatment group and Jiaomu Oil treatment group, involving 10 guinea pigs in each group.
方法：实验分为4组：正常对照组、哮喘模型组、地塞米松治疗组和椒目油治疗组，每组各10只豚鼠。
METHODS: Acute global brain ischemia-reperfusion models were established in rats of puerarin treatment group and model control group.
方法：葛根素治疗组及模型对照组建立大鼠急性全脑缺血再灌注模型。
The model of the nonlinear system is obtained by LS-SVM, the offline model is linearize at each sampling instant and uses linear predictive function control methods to obtain the control law.
该算法采用LS-SVM回归建立非线性系统的预测模型，然后，将离线模型在每个采样周期关于当前采样点进行线性化，同时利用线性预测函数控制方法求解解析的控制律。
Methods hospital site survey methodology is used to the status of infectious disease prevention and control and the management model of hospital infection control.
方法采用现场调查的方法对医院传染病预防控制现状和医院感染控制管理模式进行评估。
Methods The transmission dynamics models of deterministic SIR model and SEIDR model were used to analyze the process of SARS transmission and estimate the effect of implementation of control measures.
方法用确定性的SIR模型和SEIDR模型等传播动力学数学模型对SARS流行过程进行估计与分析。
The proposed model, control strategy and analysis methods are applicable to the target′s rendezvous orbit design and control implementation.
所提出的计算模型、控制策略和分析方法适用于目标飞行器交会对接轨道设计和控制实施。
The proposed model, control strategy and analysis methods are applicable to the target′s rendezvous orbit design and control implementation.
所提出的计算模型、控制策略和分析方法适用于目标飞行器交会对接轨道设计和控制实施。
应用推荐