To establish suitable mathematical models of ship's water ballast system, bilge water system and anti-rolling tanks are the foundation for control and simulation for these systems.
建立船舶压载调平系统和污水处理系统的数学模型是进行船舶调平和污水处理控制和仿真的基础。
It is new approaches for seek nitriding technological optimal control and simulation method that is provided by calculation result evincing this model is high precision and strong control ability.
计算结果表明模型精度高、控制能力强，为寻求渗氮工艺的最优控制、模拟方法提供了新途径。
The optimal control and simulation method for systems with stochastic perturbation were investigated in the case that control effort is to be considered under internal model control (IMC) structure.
在内模控制（IMC）结构下对控制能量存在约束时一类随机摄动系统的最优控制及其仿真方法作了探讨。
A number of other general functions and constants are used to control the run of a simulation, but the important concepts are tied to the classes.
有许多其它常规函数和常量用于控制模拟的运行，但重要的概念都与这些类结合在一起。
That control will open the way to the simulation of complex systems encountered in condensed-matter physics, nuclear physics, and cosmology.
这种控制会开辟一种新的模拟系统，并关联其它学科：凝聚态物理，核物理和宇宙学。
The flux control loop realizes the exchange between the water level value and flux value at the coupling boundary, and the water level control loop realizes tidal level simulation.
其中流量控制回路实现了物模和数模在耦合边界处水位和流量的交换； 水位控制回路实现了入海口潮汐水位的模拟。
The results show that this model well conforms to the actual operation and can be used for simulation system construction, system control strategy study and dynamic performance analysis of the system.
结果证明此模型能够与实际运行情况很好地吻合，可用于仿真系统的构建、系统控制策略的研究及系统动态性能的分析等。
Computer applications including scientific computing, data processing and information management, automatic control, computer-aided design manufacturing and testing, the system simulation.
计算机应用领域包括科学计算、数据处理和信息管理、自动控制、辅助设计制造和测试、系统仿真。
This paper discussed the design of low cost experimental installations and their applications in the experiments on the study of computer control systems by physical simulation.
本文探讨“计算机控制系统”低成本实验装置的设计、制作及其在研究型实验中的应用，即物理仿真技术的应用。
Based on mechanism analysis, a dynamic model of FCCU reactor-regenerator system is given. It can be used for simple process characteristic analysis and for control system simulation.
针对催化裂化装置反应再生系统，进行了动态机理建模研究，给出了可以用于过程特性分析和控制系统仿真研究的动态机理模型。
On the basis of this, business process simulation mechanism, activity control method, event-dealing method and graphic interface for modelling and simulation are studied.
在此基础上，建立了面向对象的动态仿真活动控制原理和事件处理方法，并对仿真建模图形界面进行了研究。
It describes the fuzzy PID-type controller design of the alkali boiler water level, the build of 2-d control table, the realization of the computer design and simulation of the controller.
以碱回收炉的水位控制为例具体论述调整系统控制量的模糊pid控制器的设计、2- D控制表的建立、以及控制器计算机设计与仿真的实现。
Put the disturbance moments of typical astronaut's push-off act as the input datas of the control system simulation, and analyze the response of the attitude control system after disturbed.
以典型的航天员推离动作对飞船的扰动力矩作为控制系统仿真的输入参数，分析姿态控制系统受到扰动后的响应。
The simulation and experimental results show that the proposed control scheme not only can achieve good dynamic performance but also can improve system stability.
仿真与实验结果都证实了该方案不仅可以获得很好的动态调节特性，而且可以提高并机系统的稳定性。
The package has the functions of modelling, system analysis, pole-placement control, optimal control, suboptimal control, LQG, selecting quadratic weighing matrices and system simulation etc.
该软件包具有模型变换、系统分析、极点配置控制、最优控制、次优控制、LQG、二次型权矩阵早优和系统仿真等功能。
Through simulation, test data collated graphics processing, and control the results of theoretical calculations.
通过模拟计算、试验数据整理、图形化处理，并对照理论计算的结果。
According to BLDC mathematical model and the movement principle, a simulation model of BLDCM control system by the SIMULINK and PSB block of software MATLAB is built in this paper.
根据无刷直流电机的数学模型和运行原理，通过MATLAB软件的SIMULINK和PS B模块，搭建了电机及整个控制系统的仿真模型。
Chapter Three introduces the modeling and simulation of the control system.
第三章是控制系统的数学建模与分析。
Next, the macromodel idea is presented to effectively use PSPICE circuit simulation software in simulation studies and study control systems by PSPICE.
然后，为了在仿真研究时有效地利用PSPICE电路仿真软件，同时也为了利用PSPICE研究控制系统，提出了有关宏模型的概念。
The simulation result shows that proportion differential control can improve the system stability and steering portability, and inhibit the vibration of steering wheel with big power ratio.
仿真结果表明，比例微分控制在提高转向轻便性的同时能改善系统的稳定性，抑制大助力比例系数下转向盘的振动。
In this paper, the software module of PMT NC system is divided, and the programming module, processing module, simulation module and hand control module are introduced.
对并联机床数控系统进行了软件模块划分，重点介绍了程序设计模块、加工及仿真模块、手动测量模块的主要功能。
Stepper motor control system has been developed using the software and hardware co-simulation method, can effectively reduce the system development cycle and cost.
步进电机控制系统的开发采用了软硬件协同仿真的方法，可以有效地减少系统开发的周期和成本。
The design of the pantograph's active control system and the study of the simulation results reduce the fluctuation of the contact force theoretically and thus improve the current collecting quality.
通过受电弓主动控制系统的设计和对其的仿真研究，理论上降低了弓网系统接触压力的波动，从而改善了受流质量。
At last, experiment of open loop and closed loop system are completed, which is in accord with the simulation result. It verified feasibility and advantage of the control scheme.
最后完成了系统的开环和闭环实验，取得了和仿真一致的结果，从而验证了控制方案的可行性和优越性。
The numerical simulation for proposed secondary voltage control system on classical New England power system is executed, and simulation results show that the proposed design scheme is effective.
最后用经典的新英格兰系统进行了数字仿真，仿真结果表明了文中所提设计方案的有效性。
In application of computer for plant, presents DCS, advanced control system and processing simulation.
工厂中的计算机应用，着重介绍了DCS，控制和流程模拟。
The weakly compressible fluid control equations and the large eddy simulation turbulence model are expounded.
阐述了二维弱可压缩流体流动控制方程和大涡模拟湍流模型。
The weakly compressible fluid control equations and the large eddy simulation turbulence model are expounded.
阐述了二维弱可压缩流体流动控制方程和大涡模拟湍流模型。
应用推荐