The system has met the requirements of slab casting, improved continuous drawing speed and reduced the cost.
该系统满足了板坯铸钢要求,提高了连检率,降低了生产成本。
This paper presents and realizes drawing blank technics parameter expert system of iron continuous casing and discusses its key realizing technology.
提出并实现了铸铁型材水平连铸拉坯工艺参数优化专家系统,并对系统的关键技术进行了设计和讨论。
During the teaching reform of the Engineering Drawing course, the author summarizes a set of practical and effective teaching methods by continuous exploration and practice for several years.
在《工程制图》课程教学中,经过几年不断地探索和实践,总结了一套切实可行的教学方案。
This paper introduces six kinds of polymer tubes continuous biaxial drawing technology, we simply introduce their molding methods, process equipment and performance improvement.
介绍了六种塑料管材连续双向拉伸技术,对其成型方法、加工装置和性能提高都作了简单介绍。
Research on continuous ore drawing and haulage equipment for underground metal mines has widely been done in main foreign countries with mining industry.
国外主要矿业国家对地下金属矿山连续出矿运矿设备进行了深入的研究。
At present, manual control is often employed in the control of drawing and rolling machine in continuous extrusion production-line.
目前,在连续挤压生产线收排线机的控制中常采用手动控制。
Based on experiments the production of screw type brass castings by upward drawing continuous casting is introduced in this paper.
本文在对蜗杆、螺杆类铜铸件的连续铸造方法进行试验的基础上,指出用上引连铸法生产此类铸件是行之有效的。
Continuous mining for ore drawing and hauling in stope is one of the important achievements in the research area of continuous mining technology in China.
采场出矿运矿连续作业,是近年来我国在连续工艺技术研究领域中所取得的重大成果之一。
The structure and texture of continuous or batch annealing deep drawing and extra-deep drawing steel sheets were observed and analyzed.
对连续退火或罩式退火后的深冲钢板和超深冲钢板的组织以及织构进行了观测和分析。
Pipe sinking drawing is analysed using continuous speed field and the equations of wall thickness variations in sinking drawing established.
利用连续速度场分析了圆管空拔过程,建立了空拔壁厚变化量计算式。
A kinematically admissible continuous velocity field is established and applied to the plane strain due to drawing, and the upper-bound analytical solution is obtained.
对平面变形拉拔问题建立了运动许可的连续速度扬并获得上限解析解。
Horizontal continuous casting procedure includes four processes: electrolysis copper plate melting, copper fluid solidification, the drawing and cutting of tube billet.
水平连铸这道工序包括四个过程:电解铜板的熔化,铜液的凝固,管坯的牵引和管坯的切割。
Speed control of drawing roller is one of the key technology for horizontal continuous casting.
拉坯辊速度控制是水平连铸工艺的关键技术之一。
The microstructure for copper strip produced by traditional drawing anneals method and continuous extrusion method are analyzed.
分析了传统拉拔退火法和连续挤压法生产铜扁线的组织。
The main production technology of BSEC includes alloy melting, continuous casting continuous extruding, rolling, online detection, drawing molding, heat treatment, etc.
北赛电工接触线的生产工艺主要包括合金熔炼、连续铸造、连续挤压、轧制、在线探伤、拉拔成型以及热处理等。
The causes for the initiation of the "spark phenomenon" during continuous wire drawing and annealing are traced. Simple measures to extinguish the spark are proposed.
本文对连续拉丝过程中出现铜线表面“打火现象”的原因进行分析,并提出简单的消除方法。
A vc curve drawing program source code, looks like the same line as the audio wave, continuous beating, high reference value.
一款vc画曲线程序的源代码,看上去像是音频波一样的线,不断的跳动,参考价值高。
The production process of continuous zinc electroplating for steel wire was composed of wire drawing, heat treatment, pretreatment, zinc plating aid post-treatment as well as wastewater treatment.
铁丝连续镀锌的生产过程由拉丝、热处理、前处理、镀锌、后处理和废水处理所组成。
This paper introduces the technical process of converter continuous casting of deep drawing steel and its development of products.
介绍了深冲钢的转炉——连铸生产工艺及产品开发情况;
The advanced technology and methods for improving drawing speed and productivity of continuous caster are discused in this paper.
就提高连铸机生产率的关键技术即提高连铸机拉速和作业率所采用的先进技术和措施进行了论述。
This paper describes the production condition of cold rolled deep drawing quality steel (IF steel) by thin slab continuous casting and rolling technique in Bengang.
介绍了本钢薄板坯连铸连轧工艺生产冷轧深冲钢(IF钢)的情况。
Speed program control of drawing roller is one of the key technology for horizontal continuous casting.
辊速度程序控制是水平连铸工艺的关键技术之一。
The horizontal continuous-casting technology with operating procedures of drawing-stopping-pushing back-stopping for manufacturing lead copper-nickle wire has been studied preliminarily.
初步研究了铅锌白铜线坯采用拉—停—反推—停水平连铸生产工艺,此工艺可以进行铅锌白铜线坯的生产。
The horizontal continuous-casting technology with operating procedures of drawing-stopping-pushing back-stopping for manufacturing lead copper-nickle wire has been studied preliminarily.
初步研究了铅锌白铜线坯采用拉—停—反推—停水平连铸生产工艺,此工艺可以进行铅锌白铜线坯的生产。
应用推荐