Sure, troops might one day communicate telepathically. But they might also control drones, computers -- and weapons -- using a brain-computer interface instead of a button or a trigger.
有朝一日，士兵们也许可以通过心灵感应进行交流，但他们还需要操纵无人机、电脑以及各种武器，唯一先进的地方在于用脑-机接口取代了按钮或扳机。
In this paper an experimental plan of transpiration control system is also provided, including the hardware and software of the interface with the computer, and the coolant supply system.
本文还提供了发汗控制系统的实验方案，包括系统的计算机接口、硬件和软件以及发汗供给系统的实施方案。
Using this interface, computer can download commands to control 810 CNC machine tool working and collect working information of the machine tool.
通过该接口，计算机可以下发命令控制810数控机床工作并采集机床工作状态信息。
Objective: to study the control method of a mechanical assistant limb based on brain-computer interface (BCI) and to demonstrate the feasibility of this method.
前言：目的：研究一种基于脑-机接口技术的康复辅助机械手运动的控制方法，并论证其可行性。
Network interface unit (NIU) is an interface device between the control computer and the communication network.
网络接口单元（NIU）是控制计算机与通信网络进行交互的一种接口设备。
This type of system control software, computer interface, the computer recording and displaying the testing process and result.
该型含系统控制软件、计算机接口，可在计算机上全程记录和显示测定过程和结果。
The structure of the hardware and software of an aviation gyroscopic test system combined by industrial control computer, interface controller and test adapter is introduced.
介绍了工业控制计算机、接口控制箱、测试适配器组成的航空陀螺综合测试系统的硬件和软件结构。
Based on industry's Ethernet, the paper introduced the systematic hardware composition and designed the data communication interface between the system and the production control computer.
以工业以太网为基础，介绍了系统的硬件组成，设计了与生产控制计算机之间的数据通信接口。
The Ultrasonic Imaging System is made up of probe excitation circuit, receiving and processing circuit, synchronous control circuit, interface circuit and computer.
超声内窥镜成像系统主要由超声探头激励电路、回波信号接收处理电路、同步控制电路、接口电路以及计算机构成。
These tasks range from design of the mechanics, sensor system, energy system, computer architecture of the robot, control and navigation algorithms to an adequate operating system and user interface.
这些业务范围从设计的力学、传感器系统、能源系统、计算机体系结构的机器人、控制和导航算法到适当的操作系统和用户界面。
The other part is the communications between Receiver and computer. The receiver will transmit the signal which is received to PC under the control of MCU through the RS232 interface.
另一部分为接收器与计算机间的通信，将接收器接收到的信号在单片机的控制下通过RS232接口传递给PC机并让PC识别出相应的操作。
The main description is on designs such as overall scheme, control program, communication interface between PLC and upper computer, data read program.
本文介绍了立体车库的PLC控制系统总体设计、控制程序设计、PLC与上位机接口的通信方案设计、计算机从PLC读取数据的程序设计等。
Brain-Computer Interface (BCI) systems support direct communication and control between brain and external devices without use of peripheral nerves and muscles.
脑-机接口系统是一个不依靠外周神经和肌肉而实现大脑和外部设备之间进行直接的交流和控制的通道。
A new interface was designed for connecting a model 8031 chip microprocessor with H_508 atomic absorption spectrometer and the computer control of the AAS instrument was realized with very low cost.
用自行设计的接口电路将8031单片机与H＿508原子吸收分光光度计连接，以很低的成本使仪器计算机化，灵敏度提高且效果良好。
The entire system is composed of computer, PC bus interface card, decode instrument, video switches matrix, audio switches matrix, pan, lens and alarm control etc.
整个系统由微机、PC总线适配卡、解码器、视频切换矩阵、音频切换矩阵、云台镜头和报警控制等部分组成。
At last the main introduction is the using of LCD in combination with 80c196kc in single chip computer control system, including hardware interface and software design.
最后，主要介绍了液晶显示器在单片机控制系统中与80c 196kc的结合使用，其中包括硬件接口以及软件设计。
It is made up of distributing network (INFI NET), process control unit(PCU), operator interface station (WSA), engineering work station (EWS) and computer interface unit (CIU).
它由分布式网络 （INFINET） ，过程控制单元 （PCU） ，操作员接口站 （WSA） ，工程师工作站 （EWS）以及计算机接口单元 （CIU）等组成。
Including power panel, control desk, monitor display and PC computer, the PLC control system has friend interface, data input and output, diagram display.
控制系统包括电控柜、控制台，显示器和电脑。控制系统具有良好的人机界面、数据输入输出功能、图形显示系统。
Brain-computer interface (BCI) systems support direct communication and control between brain and external devices without any use of peripheral nerves and muscles.
脑—机接口系统是一个不依靠外周神经和肌肉组织等而实现大脑和外界装置之间直接的交流和控制的通道。
We choose USB (Universal Serial Bus) as the communication interface of DSP and the computer which can fulfill up data transfer and the control to DSP.
系统选用USB(通用串行接口)作为和上位机通信的接口，实现处理数据的上传以及上位机对DSP的控制。
The mechanical design, sensors system design, DC Servo control system design and data acquisition system design of the man-computer stiffness display interface device are introduced.
介绍了该人机触觉再现接口装置的机械设计、传感器系统、直流伺服控制系统以及数据采集系统的设计。
PC is responsible for the management of the human-computer interface and real-time supervise of the control system. The motion controller performs all details of motion control.
PC机负责人机交互界面的管理和控制系统的实时监控等方面工作，运动控制器完成运动控制的所有细节。
In the research of the transient visual evoked potential (VEP) based brain-computer interface (BCI), VEP signal extraction and recognition are essential for obtaining BCI control signal.
在基于瞬态视觉诱发电位的脑机接口研究中，通过视觉诱发电位信号的提取与识别产生脑机接口控制信号。
Moreover, in order to control system operation and monitor real-time battery status effectively, it also develops a centralized computer control system interface based on CAN communication network.
此外，为了有效地控制系统运行及实时监测电池状态，还设计了以CAN通信网络为基础的集中式计算机监控系统界面。
The self-test of intelligent device, signal interface and test flow control, database management, and result display and storage is finished with industry computer.
工控机完成测试仪自检、信号转接板和测试流程控制、数据库管理、结果显示和存储等。
The technology involves the process control, concentration tracking, self-optimization, self-correction, AE control and a friendly man-computer interface.
内容包括工艺跟踪、浓度跟踪、自寻优、自校正、效应控制等技术以及友好的人机接口。
Since high reliability and friendly human-computer interface are very important hi an industrial computer control system, the software and hardware in our system are constructed consummately.
作为工业化的计算机控制系统，其高度可靠性和良好的人机界面至关重要，为此本文对该系统的软硬件作了尽量完善的组态。
A industry control software is adopted in host monitor computer, the exploitation, application and man-machine interface configuration method is introduced and analyzed.
监控主机采用的工控软件在该系统中的开发应用、人机界面组态的方法作了介绍和分析。
A industry control software is adopted in host monitor computer, the exploitation, application and man-machine interface configuration method is introduced and analyzed.
监控主机采用的工控软件在该系统中的开发应用、人机界面组态的方法作了介绍和分析。
应用推荐