The invention belongs to a nasal cavity preparation and particularly relates to a compound temperature-sensitive type in-situ gel nasal administration preparation for curing osteoporosis.
本发明属于鼻腔制剂,特别是用于治疗骨质疏松症的复方温敏型原位凝胶鼻腔给药制剂。
The title compound has been obtained by the reaction of copper powder with sulfur powder, potassium sulfide and 3-methylpyridine at ambient temperature and normal atmosphere.
采用铜粉、硫粉、硫化钾及3-甲基吡啶在常湿、常温下直接合成了标题化合物。
"Eutectic" refers to a mix of elements or compound that remains liquid at lower temperature than either of its components does alone.
“共晶”是指一种元素或者化合物的组合,它可以在比任一成分单独时的凝固点更低的温度下保持液态。
When the emissions are mixed with water and the compound, the carbon dioxide turns into a sherbetlike consistency at virtually room temperature and under close to ordinary pressure.
当排放的废气和水以及这种有机化合物混合时,二氧化碳会在室温和接近常压的环境下转化成像果冻一样的黏稠状态。
Conventional CVD coating process requires a metal compound that will volatilize at a fairly low temperature and decompose to a metal when it contacts with the substrate at higher temperature.
常规的化学蒸发沉淀涂层工艺需要一种容易在相当低温度下挥发并且在较高温度下与基体接触时能分解成纯金属的金属化合物。
The affects of sort of surfactant, mass ratio of compound surfactants, heating temperature and time on the oil recovery were investigated.
考察了表面活性剂种类、复合表面活性剂的配比、加热温度和时间等条件对油分回收率的影响。
Influence of compound emulsifier's ratio and amount, reaction temperature, polymerization types and functional monomer amount on the emulsion resin particle size and its distribution were studied.
系统研究了复合乳化剂配比及用量、聚合温度、聚合方式和官能团单体含量对共聚物乳胶粒径及其分布的影响。
Simulated the distributing condition of temperature and heat grads of the compound material by ansys software that is definitely a reference for practice production.
另外,借助有限元软件来模拟复合材料在吸热过程中温度及热梯度场的分布情况,对实际生产有一定的参考价值。
This product USES hydrocracking base oil refining, joined the Infineum compound additives, CIBA high temperature antioxidant, Lubrizol, New PPD Functional agent.
本产品采用精制加氢裂化基础油,加入润英联复合添加剂、瑞士汽巴高温抗氧剂,路博润降凝剂等新型的功能剂。
The test results have proved that the compound non-coupling charging structure can reduce the temperature of the working face and the blasting vibration damage on the reserved frozen soil.
试验结果证明,复合不耦合装药结构可以降低工作面温度和减小对周围保留冻土爆破振动的损伤。
Using mold prepared by compound method, on the basis of different drying time curve attained by changing environmental humidity and temperature, the optimized processing parameters were determined.
采用复合法制备型壳,在制备过程中,改变不同的环境湿度和温度而得到型壳的不同干燥时间曲线,确定工艺参数优化值。
The best process of Cu-Al rolling compound is analysed- The Cuotl compound mechanisms are understood by the effect of the metal state, the reduced ratio and the temperature.
研究了铜—铝轧制复合的最佳工艺,并通过轧前组元金属状态、压下率和温度对复合强度的影响,了解了铜—铝复合机理.。
Aiming at the coke oven temperature characteristics of great inertia, pure time-delay, non-linear and time changeable, a fuzzy compound control method is proposed.
针对焦炉温度的大惯性、纯滞后、非线性和时变性等特点,提出了一种新的模糊复合控制方法。
Some of the novel temperature transducers which meet the thermal potential of thermocouples, e. g. the infrared temperature probe and compound armored thermocouple are introduced.
介绍了符合热电偶热电势的红外测温探头、复合管型铠装热电偶等新型温度传感器。
Analysis on the microstructure shows that precipitation of compound containing titanium was found in the steel, and its amount increases with the elevation of annealing temperature.
显微组织分析表明,含钛钢中生成了钛化物相,并且随着退火温度的提高,钛化物析出量增多。
The structure of the liquid crystal compound was confirmed by IR, 1HNMR and elementary analysis. The phase transition temperature of it was measured by DSC.
目标化合物经IR,1HNMR和元素分析仪确证了分子结构,运用差示扫描量热仪(DSC)测定了液晶相态温度范围。
With the increasing of the temperature, B -C- N compound transformed from turbostratic graphite- like structure into polycrystalline crystal.
随处理温度增加,B—C—N化合物由乱层石墨结构向多晶体转变。
This paper describes a microcomputer compound control system for single phase resistance-heated furnace based on power and temperature regulations with uniform distribution and zero trigger.
本文介绍一个单相电阻炉均布式零触发调功调温的微机复合控制系统。
A synthetic liquid crystalline compound was studied by means of variable temperature FT IR spectroscopy.
对合成的液晶化合物进行变温红外光谱研究。
In order to determine reasonable processing parameters, heating of thermosetting molding compound in the mold and that of heat transfer after curing temperature are analyzed.
本文就模压料在模具中加热过程和达到固化温度以后的传热过程进行定量分析,以确定合理的工艺控制参数。
Moreover the maximum combustion temperature of the compound combustion is lower than that of the diesel.
组合燃烧的最高燃烧温度比燃烧纯柴油时有所降低。
Methods 25 patients of coronary heart disease were operated successfully under the condition of ordinary temperature and compound anesthesia of vein.
方法25例冠心病患者,均在静脉复合麻醉常温下完成手术。
The results showed the use of DCP could improve the PTC stability and PTC transition temperature of the compound, the effect being most obvious when the DCP content was 1% by mass percent.
结果表明,过氧化物交联剂(DCP)可提高体系的PTC性能稳定性和PTC的转变温度,当用量为1%质量分数时,影响最为明显。
The TG shows the temperature range of the new compound creation.
TG曲线表明了生成这些化合物的温度范围。
Features: high temperature extrusion compound, paste directly off layer stout.
特点:直接高温挤压复合,黏贴结实不脱层。
In this paper we report a new type sealed-off branchseleeted CO-CO2 compound laser operating at room temperature for the first time.
本文首次报道了一种新型的室温封闭的选支CO-CO_2复合激光器及其工作特性。
The results of the imitation experiments show that the method of the compound control can be used to improve the control performance of the system temperature for MOCVD effectively.
仿真和实验表明,这种复合控制的方法能有效地改善金属有机化合物化学气相淀积系统温度的控制性能。
The results of the imitation experiments show that the method of the compound control can be used to improve the control performance of the system temperature for MOCVD effectively.
仿真和实验表明,这种复合控制的方法能有效地改善金属有机化合物化学气相淀积系统温度的控制性能。
应用推荐