Some factors affecting coating strength, such as refractory and binder, were studied.
研究了涂料层中不同耐火粉料及粘结剂等因素对涂层强度的影响。
The earlier the sowing date was, the smaller effect on seeding stage the coating strength had.
播期越早,包衣强度对玉米种子出苗期的影响越小。
B. coating strength determines whether the printing will produce large amounts of paper powder, it's very important in determining the quality of printing.
涂层强度决定了印刷时是否会产生大量纸粉,是决定印刷质量的重要指标。
In this paper, the influence of various parameters on suspension shearing dry strength and permeability of EPC coating used on steel casting through right Angle test was studied.
通过正交试验,研究了各因素对真空实型铸造铸钢件涂料的透气性、干强度、剪切力、悬浮性的影响。
Shell aluminum alloy die-casting molding, high strength, high voltage electrostatic powder coating, corrosion resistance.
外壳铝合金压铸成型,强度高,表面高压静电粉末喷涂,耐腐蚀。
The time from pattern removal to coating, different drying methods and coatings will have different effects on strength of core.
砂芯脱盒至浸涂料的放置时间、浸涂料后不同的干燥方法及不同涂料对砂芯的强度都有不同程度的影响。
A type of powder coating manufactured using epoxy resins, generally having high mechanical strength and corrosion resistance. But limited in gloss and colour retention when exposed to sunlight.
一个主要使用环氧树脂而生产的粉末涂料类型,一般有较好的机械性能和耐腐蚀性能,但在阳光曝晒下颜色和光泽的保持能力较差。
Coating technology can directly influence the properties of the lining cloth such as peeling strength, feel, permeability, etc.
涂层加工技术对粘合衬布的剥离强度、手感、渗料性等性能有直接影响。
The potential USES of high melt strength polypropylene in the field of extrusion foaming, thermoforming, extrusion coating and blown film were also introduced.
同时还介绍了高熔体强度聚丙烯在挤出发泡、热成型、挤出涂布以及吹塑薄膜等领域的应用情况。
The coating can be solidified at room temperature, with excellent adhesion and Impact strength.
该涂料可室温固化,并有着优良的附着力和耐冲击强度。
Adherent strength of shearing is an important criterion in evaluating the quality of coating layers, and it is also the foundation to optimize manufacturing.
涂层与基体的剪切结合强度是评定涂层质量的重要指标,也是进行制造工艺优化的依据和基础。
The design of different kinds of coatings on titanium alloy was overviewed and some Suggestions on how to improve the bonding strength between bioactive ceramic coating and substrate were made.
本文对钛合金表面不同类型涂层的设计进行了综合评述,并对如何提高生物活性陶瓷涂层与基体的界面结合强度提出建议。
Interface strength is one of the most important properties of coating materials. There are no effective evaluation methods yet.
界面强度是薄膜涂层材料的最重要的性能指标之一,目前尚缺乏有效的测量方法。
Then hardness of coatings and substrate was measured. By means of bend-rotation fatigue tests, fatigue strength of coating and uncoating specimens was compared after hardening and tempering.
然后测量涂层和基体的硬度,并通过采用旋转弯曲疲劳试验比较涂层试样与未涂层试样的疲劳强度。
It was revealed by push out test that the hydroxyapatite coating greatly prompt the bonding strength between implant and surrounding hard tissues.
生物力学实验结果表明,使用羟基磷灰石涂层,可以显著提高骨组织与种植体的界面结合强度。
The wear resistance was directly proportional to the tensile strength of the coating.
涂层的抗拉结合强度与耐磨性之间存在着正比关系。
The gradient PPS/FEP composite anti-corrosive coatings were prepared on carbon steel. The bonding strength of all coating systems was determined by the pull-off test.
在碳钢表面制备了具有梯度结构的PPS/FEP复合防腐蚀涂层,采用拉开法测定了各涂层体系的结合强度。
The comprehensive strength property of EPC water-base coating has an important influence on casting quality in practice production.
消失模铸造用水基涂料的综合强度性能对实际生产有重要影响。
Coating with the underlying bond strength with the matrix on the cleanliness and roughness.
涂层与基本的结合强度与基体清洁度和粗糙度有关。
Influence factors of PVC coating agent on tearing strength of coated fabric by changing coating agent composition is studied in this paper.
通过对涂层剂组成的调整,研究影响聚氯乙烯涂层织物撕裂强度的因素。
The burning loss of carbon, which causes heavy oxidation and high porosity, is the main reason for lower hardness, strength and worse wear resistance of T8 coating.
T8涂层中由于碳元素被大量烧损,导致涂层氧化严重,孔隙率高,这是造成涂层硬度和强度不高及耐磨性较差的主要原因。
Newly developed fire resistant steels improve their elevated-temperature strength, thus reducing fire-resistant coating.
耐火钢提高了钢的高温强度,从而减少了防火涂层。
As for the performance of UVcured optical fiber buffer coating, the main concerns are the curing speed, strength, stripping force and additional loss of the buffer layer.
紫外固化光纤缓冲层涂料性能,主要考虑的是缓冲层涂料的光固化速度、缓冲层的强度、缓冲层的剥离力及缓冲层的附加损耗等性能。
The coating with high bond strength was synthesized by means of treatment of the gradient liquid phase sintering or medium temperature reactive sintering.
通过梯度液相烧结或中温反应烧结处理,热喷涂层具有很高的结合强度。
As compared to general coating, gradient coating has even more excellent performances in bending strength, bonding strength, thermal shock resistance, microhardness and thermal stress relaxation.
与一般涂层相比,梯度涂层显示出更为优异的弯曲强度、结合强度、抗热冲击性、显微硬度分布及缓和热应力等性能。
The bond strength between the coating and substrate can be enhanced through producing functionally graded coating.
通过制备梯度涂层可以提高涂层与基体之间的结合强度。
Adhesive strength, hardness and the thermal shock resistance of spraying coating were tested.
测试了喷涂层的结合强度、硬度以及抗热震性能。
Compared with other conductive metal layer, copper coating with small with stress, high mechanical strength, the plastics substrate and coating binding force is good wait for a characteristic.
与其它导电金属层相比,镀铜层具有应力小、机械强度高、塑料基体与镀层结合力好等特点。
Compared with other conductive metal layer, copper coating with small with stress, high mechanical strength, the plastics substrate and coating binding force is good wait for a characteristic.
与其它导电金属层相比,镀铜层具有应力小、机械强度高、塑料基体与镀层结合力好等特点。
应用推荐