Deep research into DSP technology and computer bus technology, design the hardware and circuit interface of PC and DSP.
深入探讨了DSP技术和计算机的总线接口技术,设计了PC及DSP的硬件电路接口。
The internal processor bus described in Sec. XX is connected to the external processor bus by a set of bus buffers located on the microprocessor integrated circuit.
XX节所描述的内部总线通过一组位于微处理器集成电路内的总线缓冲器与外部总线连接。
The design of CAN bus hardware interface circuit based on SJA1000, the selection of chips, the design of software and the realization of CAN communication are expatiated.
论述了基于SJA1000的CAN总线的硬件接口电路的设计、芯片的选择、软件设计及CAN通信的实现。
The field bus technique relates to several fields of intelligent instrument, network communications, real-time control, integrated circuit technique and computer technology etc.
现场总线技术具有丰富的内涵,涉及到智能仪表技术、网络通信技术、实时控制技术、集成电路技术和计算机技术等诸多领域。
The graph includes the short circuit interruptive capacities of the breakers in that particular bus.
该图还包括该特定的总线中的断路器的短路中断能力。
The expression for short-circuit electrodynamic force of rectangular bus bars on the basis of the calculation of three-phase symmetry short-circuit current was fi.
本文首先根据系统发生三相对称短路时的短路电流,给出了三相矩形母线短路电动力的解析表达式。
Paralleling breaker a paralleling breaker is the circuit breaker that connects the generator set to the emergency bus, and across which all the individual generator synchronizing functions occur.
并联开关并联开关是连接发电机组和应急母排的线路断路器,所有的单个发电机通过它完成同步运行。
This circuit scheme used in the design of 1553b bus interface board has been checked and accepted and runs well.
该电路设计方案用于1553B总线接口卡的研制,现已通过验收并经测试证明运行稳定可靠。
A new circuit for CAN bus dual-redundancy node is designed and implemented, which makes the redundancy switch more flexible.
设计并实现一种新颖的CAN总线双冗余节点电路,增强了冗余切换的灵活性。
The electrical elements connected include circuit breaker disconnector and earthing switch current transformer voltage transformer lightning arrester bus etc.
连接的电气元件有断路器、隔离开关与接地开关、电流互感器、电压互感器、避雷器、母线等。
The paper proposes a password circuit that by using computer ISA and PCI bus and printer interface.
本文介绍了利用计算机ISA、PCI总线和打印机接口设计密码电路。
PC and DSP exchange data using high speed static RAM and bus arbitration circuit and corresponding handshake signal is designed to ensure the correct reading and writing RAM.
PC与DSP的数据交换采用高速静态RAM,并设计总线仲裁电路及相应的握手信号,以保证PC与DSP双方对RAM的正确读写。
Subsequently the author has developed the built-up connection circuit from PCI bus to ISA bus, and then designed the PCI adapter for this system.
在研制出ISA卡的基础上,设计了PCI总线到ISA总线的转接电路,由此做出了专用于该系统的PCI适配卡。
As a try for circuit standardization, the system realizes the standard protection circuit unit and recovering-time circuit unit, which are connected to system through standard 44 pins' bus interface.
作为标准化的尝试,本系统实现了标准的保护电路单元和恢复时间电路单元,通过44芯总线插座与标准总线接口连接。
Three common power bus ESD protection structures in CMOS IC were discussed, the circuit structure and working theories were analyzed, an improved power bus ESD protection structure was put forward.
讨论了三种常见的CMOS集成电路电源总线esd保护结构,分析了其电路结构、工作原理和存在的问题,进而提出了一种改进的ESD保护电源总线拓扑结构。
The structure and function of a large-scale switch matrix which based on I2C bus are introduced, and its test circuit structure and control circuit structure are given.
介绍了一种基于I2C总线的大型开关矩阵结构及其功能,给出了其测试电路结构组成及控制电路组成。
The hardware circuit based on USB bus and CPLD of the system of label image captured has been developed, including human-computer interaction interface.
开发了基于USB总线和CPLD的标牌图像采集系统的硬件电路以及人机交互界面。
This paper discusses the designing method of CAN bus juncture circuit based on SJA1000 and presents the CAN bus juncture circuit, the SJA1000 initialization programme and the flow charts.
介绍了基于SJA1000的CAN总线接口电路的软硬件设计方法,给出了CAN总线接口电路、SJA1000初始化程序、接收及发送数据程序的框图。
Main breaker a main breaker is a circuit breaker at the input or output of the bus, through which all of the bus power must flow.
主开关主开关是在母排输入或输出端的线路断路器,所有的电流都要从那通过。
A test and maintenance platform using a general circuit board tester was designed for testing special BUS using circuit modules.
针对专用总线电路板模件,利用一种通用电路测试仪,设计了一个专用总线电路模件测试维修平台。
Protection of bus-tie circuit breakers: long time delay overcurrent and instantaneous overcurrent.
汇流排联络断路器保护:长延时过流、瞬时过流保护。
This paper studies the method of designing PXI system controller using ETX embedded computer module, presents the design solution and complete the circuit including the trigger bus.
本文研究了利用ETX嵌入式计算机模块来设计PXI零槽控制器的方法,提出了总体方案,完成PXI触发总线的设计,并实现了具体的电路设计。
The linear sampling circuit of direct current bus and the hysteresis voltage comparator circuit are confirmed.
确定了直流母线电压线性采样电路以及迟滞电压比较电路。
The design of a fireworks display control circuit is based on the ARM S3C2440 controller, the CAN bus communication technology and Embedded technology.
利用ARM S3C 2440微控制器、网络通信技术和嵌入式技术设计烟花燃放控制电路。
The other module is PCI bus interface circuit. PI7C8150B chip of PERICOM Corporation is used to finish transmission of the image data.
另一个是PCI总线接口电路,本设计中采用PERICOM公司的PCI桥接芯片PI7C8150B实现图像数据的传输。
It is described the great sense to have a train bus circuit for metro vehicles, and a design method is proposed.
阐述了地铁车辆设置列车母线电路的重要意义,提出了列车母线电路的设计方法。
It is described the great sense to have a train bus circuit for metro vehicles, and a design method is proposed.
阐述了地铁车辆设置列车母线电路的重要意义,提出了列车母线电路的设计方法。
应用推荐