The air will be heated by the PTC ceramic heating element in this instrument, and the volume of the air can be adjusted, too.
该仪器采用PTC陶瓷发热体进行空气加热,可以进行风量调节。
We'll now look at another ceramic which is made from mixing sand with minerals and heating to over 600 degrees Celsius.
现在我们来看看另一种陶瓷,它是由沙子和矿物质混合,再加热到600多摄氏度制成的。
Partial heat treatment in adoption of electric ceramic heater & overall heat treatment in heating treatment oven are included; and, overall heat treatment is recommended if the conditions permit.
包括采用陶瓷电加热器加热的局部热处理和采用热处理炉处理的整体热处理;条件适合的情况下优先采用整体热处理。
Instead, he recommends using glass, corning ware or ceramic containers for heating food.
他建议给食物加热时,要用玻璃、康宁锅或陶瓷容器来装。
Resistance to heat shock of the obtained ceramic coating was tested by alternate heating and cooling experiments, and was compared with those obtained by other researchers.
通过交替加热及冷却试验测试该陶瓷涂层的抗热冲击性能,并与其他人的研究数据进行比较。
So the technique extension and application of ceramic inner heating galvanizing is limited.
这使得陶瓷锌锅内加热技术的应用和推广受到了极大的限制。
In this process, microwave heating is used to make ceramic materials plastifying under a high temperature, so that a good machinability can be achieved.
该方法利用微波加热使陶瓷材料在较高温度下塑性化,从而获得到较好的加工性。
Made of heat-resistant alloy wire heating elements installed in the high-temperature ceramic bracket, according to the design can extend service life and easy to replace.
用耐热合金丝制成的加热元件安装在耐高温的陶瓷支架上,按设计可以延长使用寿命,并易于更换。
According to study on after-treatment technique, a new type of DEP filter made of ceramic wall flow, and its regeneration method, infrared heating, is put forward.
通过对柴油机排气微粒后处理技术的研究分析,提出以壁流式陶瓷为过滤材料,结合红外加热再生方法,形成一个新的微粒后处理系统。
In this paper, calcium carbonate and quartz, two kind of ceramic powder, are selected to research how their particle size effect the dielectric constant and the microwave heating performance.
本文将通过对碳酸钙和石英两种陶瓷粉体的研究来探讨其粒度对粉体介电损耗及微波加热性能的影响。
This paper describes the basic principle of microwave heating, and summaries its application and prospects of microwave heating technology in ceramic industry.
简要阐述了微波加热的基本原理,论述了微波加热的特点以及微波加热技术在陶瓷工业中的应用及前景。
The thermal shock failure of ceramic coating is essentially the fatigue failure induced by cyclic thermal stress during repeated heating and cooling.
陶瓷涂层的热震失效是由于涂层在循环加热和冷却过程中,涂层内产生循环热应力,导致涂层发生热疲劳失效。
This paper presents a electric heating technology with electric chemistry methods by which the oxide film is deposited on the surface of the ceramic tube.
提出在陶瓷管基体表面用电化学方法沉积氧化物薄膜以实现电加热技术。
The electric hot air curtain machine can be divided into two types of semiconductor thermal sensitive ceramic heater and a fin electric heating tube heater according to different heating materials.
电热风幕机根据加热材料不同可分为半导体热敏陶瓷加热器和翅片电热管加热器两种。
Instead, he recommends using glass, corning ware or ceramic containers for heating food. you get the same results, only without the dioxin.
他建议给食物加热时,要用玻璃、康宁锅或陶瓷容器来装。
Instead he recommends using glass such as Corning Ware Pyrex or ceramic containers for heating food. You get the same results only without the dioxin.
他建议加热食品要用玻璃,如康宁餐具,高硼或陶瓷容器,这些容器没有戴奥辛是健康的。
Two models - radiant wire screen or radiant ceramic element. Can be manifolded to provide a large radiant panel. Suitable for numerous industrial drying and heating applications.
两个系列供选:辐射金属丝网,辐射陶瓷元件。可以设计为大型辐射屏,适合众多的工业烘干和加热应用。
The effect of a volumetric heat source induced by pulse laser heating in the temperature fields of a fine round ceramic bar was investigated experimentally and theoretically.
用脉冲激光模拟微小圆柱陶瓷棒的脉冲内热源情形,实验研究了脉冲内热源对圆柱陶瓷端面温度场变化施加的影响。
The paper discusses in detail the problems to be solved for the application of micro - wave heating technology to ceramic industry, and forecasts the prospect for this application.
较详细地讨论了微波加热技术应用于陶瓷行业需要解决的几个问题,指出了微波加热技术在陶瓷行业的应用前景。
At present, YD series electric slow cooker except the ceramic liner may be heating power, but also on the heating in the fire, but also more resistant to burning.
目前,YD系列电热慢炖锅其陶瓷内胆除了可用电加热外,还能在火上加热,而且又较耐烧。
The new ceramic compound is very resistant to thermal shock and can withstand rapid heating or cooling at wide temperature fluctuations.
并且,这种新型陶瓷材料还具有很好的抗热震性能,可在大范围温度波动下被迅速加热或冷却。
Good at civil engineering design and construction suoerviser in textill&dying, ceramic etc. Familial with requirement of processing technology , water system, heating system, power system etc.
擅长纺织印染及陶瓷制品等行业的土建工程设计与施工。熟悉工艺,水、暖、电对土建的要求。
All the Ceramic Fiber Special-shape Products has the property of low shrinkage on heating, low thermal conductivity, light weigh and high impact strength.
所有异形制品在其使用温度范围内都有较低的收缩,并保持有高隔热、轻质和抗冲击的特点。
The experimental results show that a fast ceramic sintering with high stability and repetition could be realized through suitable control of heating profile and improving of hybrid heating structure.
实验表明:通过合理的保温结构和工艺控制,可实现高稳定性和重复性的微波快速烧结。
Both clamping devices and heating furnace has been adopted automatic and manual bi-directional regulating system and the embedded ceramic infrared parts to enhance the thermoforming effect.
板材夹具和加热炉采用自动和手动双向调节系统和埋入式陶瓷远红外辐射元件,提高热吸塑效果。
This paper describes the basic mechanisms and characteristics of microwave heating and reviews the latest achievements for synthesizing, processing and recovering of ceramic materials.
简要介绍了微波与材料之间相互作用的基本原理及其特点。
The results showed that the microstructure of ceramic tiles varied with different heating temperatures and cooling methods.
结果表明,在不同受热温度和冷却方式条件下,釉面内墙砖的显微结构会发生改变。
The results showed that the microstructure of ceramic tiles varied with different heating temperatures and cooling methods.
结果表明,在不同受热温度和冷却方式条件下,釉面内墙砖的显微结构会发生改变。
应用推荐