On nights when the moon is more than a quarter full, moonlight shines through the holes casting its own paler pattern.
时,月亮的夜晚比一个季度全面,更透过月光照耀孔铸造自己的苍白的模式。
Full-mold casting is a technique similar to investment casting, but instead of wax as the expendable material, polystyrene foam is used as the pattern.
实型铸造是与熔模铸造类似的技术,但它用做型模的消耗材料是聚苯乙烯泡沫而不是石蜡。
The multiple versions of EMS in the continuous casting of flat products are reviewed and classified with respect to liquid steel flow pattern and metallurgical results.
回顾了电磁搅拌应用于扁平产品连铸生产中的各种形式,并按液态钢水流动形态和冶金效果给予分类。
Because the mold is formed around a one-piece pattern (which does not have to be pulled out from the mold as in a traditional sand casting process), very intricate parts and undercuts can be made.
由于这种铸型是环绕整块型模形成的(无需像传统的砂型铸造工艺那样拔模),能制作十分复杂的零件和浮雕。
The changes of pattern size directly affect the dimensional accuracy of casting in the EPC process.
在消失模铸造过程中,模样尺寸变化直接影响铸件的尺寸精度。
A new expendable pattern casting (EPC) process, with vacuum and low pressure, was introduced.
介绍了一种新的铸造技术——真空低压消失模铸造的工作原理。
If a hollow casting is to be made the pattern will include extension pieces so that Spaces to accept the sand core are molded into the sand. These additional Spaces in the mold are termed core prints.
如果铸造空心铸件时模型上包含伸长杆便于在砂中放置砂芯的空间称为型芯座。
The research on microstructure pattern and mechanical properties of the circular ring parts by liquid forging experiment under different specific pressures and casting temperatures were stated.
通过圆环零件的液态模锻成形实验,对在不同比压和浇铸温度条件下,锻件的微观组织形貌和力学性能进行了分析研究。
Abstract: in this paper the gas gap in the expendable pattern casting process was studied and the relation between the gas gap and collapse defect is discussed.
文摘:对消失模铸造铸铁件流动前沿的气隙进行了研究,探讨了气隙与坍塌缺陷的相互关系。
In this paper the gas gap in the expendable pattern casting process was studied and the relation between the gas gap and collapse defect is discussed.
对消失模铸造铸铁件流动前沿的气隙进行了研究,探讨了气隙与坍塌缺陷的相互关系。
Pattern inspection: the pattern inspector should examine the pattern as per casting process drawing after pattern completion.
模具检验:模具制作完毕后,由模具检验员按照铸造工艺图对模具进行检验。
This paper presents a kind of method for producing ductile iron castings with the technique of evaporative pattern casting and in mould spheroidizing, and introduces its main measures.
提出了用气化模铸造型内球化处理生产球铁铸件的方法及其工艺要点。
In the production of automation quantity full mold casting, the foam pattern making is an important protion procedure.
在自动化大批量的实型铸造生产中,泡沫模型的制作是一个重要的生产工序。
This paper introduces the process of making "nine dragon" tripod vessel and describes the technology and key for casting the body by lost wax pattern plaster mold process in detail.
前言:简述了“九龙鼎”的制作过程,详细介绍了用熔模石膏型铸造大型鼎身的工艺及要点。
Therefore, the vocational school Chinese language teaching class cannot like casting standard components, a non-pattern may not, the Chinese language teaching method should be more and varied.
因此,职业学校的教学尤其是语文课教学就不能像浇铸标准件那样,非一个模式不可,语文教学的方法必须多种多样。
In lost foam casting (LFC), the foam pattern is the key qualification, and the filling process is one of the crucial processes to ensure the high quality of the foam pattern.
干砂负压消失模铸造技术(简称LFC)中模样是消失模铸造成败的关键,而泡沫珠粒的充填是获得优质泡沫模样的关键工序之一。
Analyzes the reason of the white defects appearing in the lost pattern casting and puts for - ward some effective preventive measures referenced with the production reality.
分析了消失模铸造的铸件出现白色缺陷的原因,并根据生产实际提出了一些有效的预防措施。
The key basic technology in full mould casting process includes: material and formation of pattern, coating, vibratory fill of moulding sand as well as molten metal filling.
实型铸造法的关键基础技术包括:模样的材料及成形、涂料、型砂的振动充填、金属液的充填。
The molding process of foam pattern for lost form casting is introduced.
介绍了消失模铸造泡沫模样的成形过程。
It is simple process, less pollution, low cost, good quality casting, and can meet producing of locomotive casting, that the investment pattern was made from the shell mold was made from silica sol.
采用硅溶胶粘结剂制造型壳,工艺简单,污染少,成本低,铸件质量好,满足机车类精铸件生产要求。
Key influential factor of causing the dimensional instability of wax pattern and casting for investment casting is the instability of component of reclaimed wax.
造成硅溶胶精铸蜡件与铸件不稳定的关键因素是回收蜡成分不稳定。
In lost foam casting (LFC), the foam pattern is the key qualification, and the beads filling process is quite crucial to ensure the high quality of the foam pattern.
泡沫模样是消失模铸造成败关键,而泡沫珠粒的充填是获得优质泡沫模样的关键工序之一。
Based on the analysis of the technologies of the expandable pattern casting, borne problems of the design and selection of the EPC molding equipment-squeezing table have been investigated.
本文从EPC干砂造型工艺特点出发,分析了EPC造型设备——振实台设计和选用中应考虑的若干问题。
Method used to reduce blow hole defects of die castings include 4 aspects:melting, pattern die. parameters of die casting process, and stripping agent.
前言: 消除压铸件气孔的方法包含4个方面:熔炼、模具、压铸参数和分型剂。
Holt writes, "During the day, the sun shines through the holes, casting a changing pattern of pointed eclipses and circles of light on the bottom half of each tunnel."
霍尔特写道,“白天,阳光普照通过洞,使人对每一个隧道的下半部分是指食和光界的变化规律。”
The technical requirements for the lost pattern made from the paraffin-stearin and the shell mould made from colloidal silica in the precision casting were introduced.
介绍用石蜡-硬脂酸低温模料制作熔模,用硅溶胶作粘结剂制造模壳的工艺。
Results showed that compared with sand casting castings, dimension precision and quality of lost pattern castings can be improved and rate of finished products can be increased up to65percent.
结果表明,与砂型铸件相比,消失模法生产的铸件尺寸精度及质量提高,工艺出品率提高到65%以上。
The research status on the mold filling of expendable pattern casting process is reviewed from the aspects of mold filling characteristics, heat and mass transfer.
从充型特性以及传热和传质两个方面回顾了消失模铸造充型过程的研究进展。
Practice prove, application of casting technique of lost pattern in production of agglomeration machine trail fixed screen grate, its surface quality and pe…
实践表明,采用消失模铸造生产的固定筛篦条产品表面质量、 性能指标均能保证使用要求。
Sand fill and compaction are essential factors of Expendable Pattern Casting(EPC).
砂 的填充及紧实是实型造型工艺技术中的关键因素。
应用推荐