• When in different part or the casting thickness not equal, the die-casting magnesium alloy AZ91D has different mechanical property.

    压铸镁合金az 91d铸件部位厚度不同力学性能不同。

    youdao

  • The results show that the series high temperature creep resistance die casting magnesium alloy has potential to make power-train parts with decrease of the weight greatly.

    试验结果表明,所开发蠕变压铸镁合金具有应用于汽车动力系统部件制造并大幅度减轻重量潜力

    youdao

  • The magnesium die casting and application of magnesium alloy products lead to significant amount of magnesium scrap.

    镁合金铸造镁合金产品广泛应用造成大量的镁合金废料

    youdao

  • The high zinc magnesium matrix composite was fabricated by adding mix race earth into the molten high zinc magnesium alloy using common casting.

    常规铸造条件下,镁合金熔体加入适量混合稀土获得高锌镁合金。

    youdao

  • Mainly introduces the advantages of magnesium alloy and its rapid increment trend, and the design process of magnesium alloy die casting for Hitachi gear cap.

    介绍镁合金优点快速增长趋势,介绍了日立齿轮盖镁合金压铸件模具的设计过程

    youdao

  • The microstructure evolution and partially remelting processing of two-phase-region casting AZ91D magnesium alloy ingots were investigated.

    对在两相区铸造进行半固态制浆所得az91 D镁合金坯料部分工艺条件及组织演变进行了研究

    youdao

  • The paper explains the characteristics of magnesium alloy die casting parts and points out the demand for magnesium alloy die casting parts in foreign automobile trade.

    文中讲述镁合金压铸特点国外汽车行业镁合金压铸件需求情况

    youdao

  • Magnesium alloy with lower density, lower viscosity and excellent liquidity is suitable for anti-gravity casting.

    镁合金密度小粘度流动性好,很适合反重力铸造

    youdao

  • By using mushy extrusion molding for magnesium alloy, the disadvantage of pressure casting is avoided.

    采用糊态挤压成型镁合金避免了压力铸造缺点

    youdao

  • It is found that the surface defect like black stripes appeared in certain surface regions of die-casting wheel hub AM60B magnesium alloy after acid pickling in the anti-corrosion treatment.

    AM 60 B镁合金轮毂压铸件进行表面耐蚀处理时,发现前处理酸洗,表面某些区域会产生黑色条纹缺陷

    youdao

  • The most of magnesium alloy was formed with die-casting.

    镁合金大部分采用压铸技术生产。

    youdao

  • Feeding capacity of AZ91D magnesium alloy is enhanced by using pressure solidification in lost foam casting(LFC).

    利用消失铸造压力凝固技术增强AZ91D镁合金补缩能力

    youdao

  • The effect of deformation temperature and deformation speed on the limit drawing ratio (LDR) and microstructure of the roll-casting AZ31 magnesium alloy sheet.

    研究变形温度、变形速度铸轧az31镁合金极限拉深(ldr)组织影响。

    youdao

  • The squeezed-casting formability of AZ91D magnesium alloy in semi-solid state was studied.

    研究了AZ91D镁合金不同半固态温度下挤压铸造。

    youdao

  • This paper mainly introduces the research on the substitution of Aluminium bar by rare earth, magnesium and silica alloy on the process of chemical capping to rimmed steel during casting.

    文中主要研究稀土合金替代应用于沸腾钢浇注化学封顶工艺

    youdao

  • The microstructure of AZ91 alloy keeps some characteristics of the high temperature melt after thermal rate treatment, which improves the mechanical properties and casting quality of magnesium alloy.

    处理组织部分保留高温过热时特性从而使镁合金力学性能铸件质量得到提高

    youdao

  • The casting powder reduces hot crack trend of magnesium aluminum alloy castings.

    保护减少了镁合金铸件倾向

    youdao

  • A new type of continuous production technology of low pressure casting for magnesium alloy was developed.

    研制开发了新型镁合金低压铸造连续化生产技术

    youdao

  • The die-casting industry of magnesium alloy housing is at an early age and a sunrise industry with enormous development potential.

    镁合金手机外壳压铸行业刚刚起步,目前才形成规模取得效益,具有巨大的发展潜力,一个朝阳产业

    youdao

  • In this paper, the twin-roll casting and hot rolling were used to manufacture magnesium alloy strip, and the strip billet was rolled into thin strip.

    研究铸轧热轧镁合金生产工艺利用铸轧直接进行热轧,研究轧制工艺参数及轧后冷却条件对镁合金微观组织的影响。

    youdao

  • Some parts and their features made by die-casting are listed. the results show that the market of magnesium alloy thixo-molding is good.

    说明镁合金触变注射成形技术有好的市场前景。

    youdao

  • Our main products include Auto slack adjusters (patent technology), 3g wheel hubs, magnesium alloy die-casting parts, Sand-Coated die casting, mobile PC system etc.

    主营产品汽车刹车间隙自动调整臂(获得国家实用新型专利)、第三轿车轮毂轴承单元、镁合金成型产品、铁膜覆铸造、车载pc等。

    youdao

  • This invention relates to a kind of automobile hub of magnesium alloy and producing metho. It belongs to the die-casting technology of non-ferrous metal.

    发明涉及镁合金汽车轮毂及其制造方法,具体地说是用于汽车车 轮零部件轮毂加工,属于有色金属的冶炼与压铸技术领域。

    youdao

  • This invention relates to a kind of automobile hub of magnesium alloy and producing metho. It belongs to the die-casting technology of non-ferrous metal.

    发明涉及镁合金汽车轮毂及其制造方法,具体地说是用于汽车车 轮零部件轮毂加工,属于有色金属的冶炼与压铸技术领域。

    youdao

$firstVoiceSent
- 来自原声例句
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定