Decreasing blade speed will make the blade act softer, but blade life will also decrease.
叶片速度下降将使法叶柔软,但叶片寿命也会减少。
Main features: Saw Blade speed with stepless speed of the hydraulic control of tool path to achieve the wild speed.
主要特点:锯条的运行速度采用无级调速,走刀速度由液力控制实现为无忌调速。
The blade speed and feed charts provide proper blade speed and feed parameters for optimum performance of the blades.
锯条切割速度及进给力图表提供了合适的锯条速度和进给力参数,使锯条能发挥最佳性能。
The blade type anemograph is used to measure and simulate the turbulence speed.
使用叶片式风速仪测量模拟气缸内的涡流转速。
One of the huge advantages of the blade server for cloud computing use is bandwidth speed improvement.
对于云计算来说,刀片服务器的主要优点之一是提高了带宽速度。
A pitch controller rotates each blade around a bearing, setting it to the best angle for the wind speed.
同时间距控制装置会根据风速旋转安装在轴承上的风叶,保持在最佳角度。
Pitch controller: to maximize lift as the wind speed changes, a controller can automatically rotate each blade anywhere from a fraction of a degree to multiple degrees per second.
间距控制:为了最大限度地根据风速变化提升发电效率,新型风力发电机上的控制器每秒钟都能够对每一片风叶进行任何角度的调整。
Blade performance is a combination of the material being cut, cutting speed and blade life.
刀片的性能是被切断的材料组合,切割速度和刀片的生活。
"Can't we dig it out?" I asked after I hit it full speed with the lawn mower, breaking the blade.
“我们不能把它挖出来吗?”当我在石头上撞断了全速运转的割草机的刀片后,我问道。
Speed does not matter because we are metering with a doctor blade.
速度并不重要,因为我们是用刮刀计量。
The optical fiber sensor that defects of traditional sensors are overcome provides a reliable way for real time accurate measurement of high speed rotating blade vibration.
光纤传感器的出现,克服了传统传感器的缺陷,为实时精确测量高速旋转叶片振动提供了可靠的保证。
Increasing spindle speed makes the diamond blade cut harder, decreasing the spindle speed makes the blade cut faster.
提高转速使金刚石刀片切割难度,降低主轴转速使刀片切割速度更快。
Secondly, analysed the approach model, described circular arc approximation method, approaching blade curved surface with this method and realized raise of the approach speed.
其次,分析了逼近模型,推导了单圆弧逼近方法,用这一方法来逼近叶片曲面,提高了逼近速度。
The effects of magnitude of blade disorder and disk rotating speed on the vibration mode localization are analyzed.
分析了叶片的失谐量和轮盘的转速对结构振动模态局部化的影响。
If the design speed is not achieved, the blade will tend to wander as cutting begins.
如果没有达到设计速度,由于切割刀将趋于诧开始。
Under the same impeller outlet speed, the flow speed of blade diffuser is faster than the vaneless one. The average flow field at impeller outlet trends to uniform.
在相同叶轮出口速度下,叶片扩压器比无叶扩压器中气流速度下降迅速,叶轮出口处平均流场趋于均匀。
The table provides a recommended operating speed and a maximum safe speed for a range of blade diameters.
推荐表提供了安全运行速度和最高车速一系列叶片直径。
The settle time is related to the Angle of harrow leaf and harrow blade and principal axis speed of drier.
物料在小干燥盘上的停留时间与耙叶和耙刃的角度以及干燥机主轴的转速有关。
The length and speed of blade became longer and faster accordingly.
透平机械中的叶片长度和叶尖线速度都不断提高。
The two different categories are multi-blade wind wheel and high speed wind wheel.
两种不同类别是指多翼风轮和高速风轮。
The influence of cutting speed and feed rate on the surface roughness of machined blade was investigated.
研究了切削速度和进给量对加工表面粗糙度的影响。
When the blade type anemograph is used to measure and simulate the turbulence speed, the effect involved possibly by the blade shape and installation position is tested.
在使用叶片式风速仪测量模拟气缸内的涡流转速时,分析叶片形状、安置位置可能带来的影响;
Noncontact measuring of high speed rotating blade vibration is the most promising technology in the blade vibration measuring.
高速旋转叶片振动的非接触测量是叶片振动测量中极具发展前景的技术。
The real time measuring system of high speed rotating blade vibration, tip timing sensor, pulse signal sampling system and analysis processing of blade vibration signal are researched.
研究了高速旋转叶片振动实时监测系统,叶端定时传感器、传感器脉冲信号采集电路和叶片振动信号的实时分析和处理。
The plastic dynamic response of a turbo blade rotating in high speed under impact by a flying object is analyzed.
以涡轮发动机为背景,讨论了高速转动的涡轮叶片受到飞射物强烈撞击后的塑性动力响应问题。
High precision, fast speed, adjustable limit structure on the uneven thickness of the blade can be component.
精度高、速度快,可调式限位结构对厚薄不均匀的刀也能胜任。
A high-speed sawing machine for aluminum bar is designed, the application of woodworker-circular-saw blade improves the cutting efficiency and quality, and reduces the waste of material.
设计开发了高速铝棒切断锯床,该锯床采用木工圆锯片作为切断刀具,既提高了锯切效率和质量,又降低了材料的浪费率。
It was falling with the keenness of a knife-blade. Every instant the speed accelerated frightfully.
飞机下落时就像刀身锐利地划过,速度每分每秒都在急剧增加。
Effects of rotation speed on the impact process and results are pointed out by the analysis of structural plastic dynamic response and blade deformation.
通过对结构塑性动力学响应和叶片变形过程的分析,指出了叶片断裂时的不同转速对撞击过程及结果的影响。
Effects of rotation speed on the impact process and results are pointed out by the analysis of structural plastic dynamic response and blade deformation.
通过对结构塑性动力学响应和叶片变形过程的分析,指出了叶片断裂时的不同转速对撞击过程及结果的影响。
应用推荐