Test results show that the method can simulate turbine blade key section "s working" stress field "and temperature in the laboratory and give reasonable life data for turbine blade."
试验结果表明：试验方法能够模拟涡轮叶片考核截面在实际工作状态下的应力场和温度，利用所提出的试验方法和分析技术得到叶片的寿命数据是合理的。
Sharp blade key: hand must keep horizontal motion, force must be uniform and owner. on back must be straight or round straight, nearly edge department can not have a little hunchback.
刀刃锋利的关键所在：手必须保持水平运动，力必须均匀，刀背必须保持平直或圆直，近刃口部不得有一点驼背。
The working principle and key parameters of the blade separator were introduced, and tests on the performances of adding the separator on the contra-rotating axial flow fan were carried out.
介绍了叶片分离器的工作原理和关键参数，并对加装了叶片分离器的对旋轴流风机进行了性能测试试验。
The turbine blade is one of the key components in aeroengine.
涡轮叶片是航空发动机中的关键部件之一。
A sacrificial blade forged at the birth of the Roman empire holds the key to an ancient and bloody conspiracy that threatens to erupt into the present day.
一个牺牲刀片在罗马帝国的诞生持有伪造的关键一个古老而血腥的阴谋，威胁到爆发到今天。
Testing research of dynamic stress in turbine blade is the key for solving the crack of runners.
开展真机转轮叶片动应力试验研究是解决大型水轮机转轮开裂的关键。
Blade is one of the key parts for steam turbine. Working.
叶片是汽轮机的重要零部件之一。
The technology of designing the stock of blade forgings is the key in forge work. So there are many differences between turbine blade and other parts in this technology.
锻件的余量加放技术是锻造加工的关键技术，叶片锻件的余量加放技术与其它零件有着很大的差异。
The hot die forming and key technology of hydro-turbine blade have been introduced with discussion about the numerical simulation application in hydro-turbine blade hot die forming.
介绍了水轮机叶片热模压成形及其关键技术，并探讨了数值模拟技术在水轮机叶片热模压成形中的应用。
The blade is a key component for wind turbine to receive the wind energy.
风力机叶片是风力机接收风能的关键构件。
The working principle and key parameters of the blade separator were introduced, and tests on the performances of adding the separator on the contra-rotating axial flow fan were carried out.
通过对对旋式轴流通风机小流量特性的分析，并利用实验验证分离器能够控制和改善对旋风机小流量内部流动特性，从而获得叶片分离器设计和使用的一些关键技术。
The cutter blade is a key part in the process of the staple production and has an important effect on the staple quality, cost and production efficiency.
化纤切断刀是化学短纤维生产中的关键零件，对纤维的切割质量、成本和生产效率有着重要的影响。
Blade is seen as a key part of the steam turbine. The performance and efficiency of steam turbine depend on the machining quality of blade surface.
叶片是汽轮机组的关键零件之一，其型面加工质量的好坏将直接决定汽轮机组性能的优劣和效率的高低。
Therefore, it is a key of design the verdant forage harvesting machine that rational design mince-drum and motion-blade.
因此对切碎滚筒及动刀片的合理设计，是青饲机设计的关键。
This paper gives the design method and key point during machining of pin holes on rotor for the fork-type blade root.
论述了转子叉形齿叶根销孔加工用钻模的设计方法及制造时关键要点。
The parting technology of blade forgings is the key point in forging work.
叶片锻模的分型技术是叶片锻造加工的关键技术。
One of the key-technologies of guiding device investment casting is getting internal ring, external ring and blade unit by splitting integral guiding device part for wax-mold design.
导向器类零件分体式精铸的关键技术之一是切分得到蜡模模具设计的内、外环及叶片单元体即如何实现分割面的生成。
Furthermore, the performance of different skewed Angle and blade stack line is also investigated, which are the two key parameters of skewed blade. Some useful conclusions are listed.
此外还考察了不同前弯角度和叶片重心积迭线对气动性能的影响，得出了一些有益的结论。
XU Z Y. Research on key technology of precision electrochemical machining of engine blade[D]. Nanjing: Nanjing University of Aeronautics and Astronautics, 2008.
[12]徐正扬。发动机叶片精密电解加工关键技术研究[D]。南京：南京航空航天大学， 2008。
The key point is whether you hold the blade or the handle.
关键是你拿的是刀刃还是刀柄。
This paper analyzes the mechanism of noise generation, and indicates that the source of noise generated from a resonating saw blade is the key source for the noise generation.
分析了圆锯片噪声产生的机理，同时指出共振噪声是圆锯片噪声的重要组成部分。
The model directly simulate the blade material and rolling conditions, the key factors in rolling process for the first time.
模型首次直接对影响辊压过程的关键因素即基材材质和辊压条件进行了模拟分析。
As a critical part of helicopter, rotor blade anti-fatigue design technique is one of the key to improving safety life and decreasing cost.
作为直升机的关键动部件，桨叶的抗疲劳设计技术是提高桨叶安全寿命，降低桨叶使用成本的关键。
The performance of the diamond saw-blade matrix is the key factor that affects cutting capability.
金刚石工具胎体的性能是影响金刚石工具切割性能的关键因素。
Main rotor is the key part of helicopter modeling, the associated modeling methods of aerofoil aerodynamic loads, rotor inflow dynamics and blade flap motion are discussed in detail.
主旋翼是直升机建模的关键，详细讨论了与其相关的翼型气动力模型、 诱导速度模型和挥舞运动模型的建模方法。
Main rotor is the key part of helicopter modeling, the associated modeling methods of aerofoil aerodynamic loads, rotor inflow dynamics and blade flap motion are discussed in detail.
主旋翼是直升机建模的关键，详细讨论了与其相关的翼型气动力模型、 诱导速度模型和挥舞运动模型的建模方法。
应用推荐