The pressure arch was defined, and its boundary was determined based on stress analysis.
对压力拱拱体进行定义,通过应力分析确定拱体的边界,并用数值分析方法对拱进行分析。
Based on stress analysis of soil mass in the course of cleavage grouting, the cleavage type of different kinds of soil mass is discussed in this paper.
本文通过对劈裂灌浆过程中土体的应力分析,探讨了不同类型土体劈裂形式,从而对劈裂灌装加固土体的机理得到了较好的解释。
This paper is based on stress analysis of directionally solidified turbine blade with the Finite Element Method. The reliability analysis method with a simple failure model is proposed.
本文在正交异性材料定向结晶涡轮叶片的应力有限元分析的基础上,以一种简单的破坏模式列出了可靠度的计算方法。
Based on the calculation and analysis, the abac for shearing stress calculation in the range of normal parameter is obtained.
在计算与分析的基础上,给出了常用参数范围内的剪应力计算诺模图。
The relationship of stress and strain of corroded steel bar based on the results of testing and analysis is presented.
根据试验结果与分析结果的统计分析,提出锈蚀钢筋的应力与应变关系。
Based on completion of wall strength calculation, then do the finite element stress analysis.
在完成管壁强度计算的基础上,进行管壁有限元应力分析。
Based on the formula for calculating the stress at the plate end of a rc beam strengthened by plate with arbitrary forces, the parameter analysis is presented.
在粘贴片材加固的混凝土梁的锚固端应力计算公式的基础上,对集中荷载和均布荷载作用下的梁进行参数分析。
Based on qualitative analysis, the observational data of compression stress metre in a concrete dam have been analyzed quantitatively in this paper by mathematical mode.
在定性分析的基础上,通过建立数学模型,对某混凝土坝压应力计观测资料进行了定量分析。
Based on the stress analysis for cutter damage with elastomechanics theory, measures for improving cutter life are proposed.
在应用弹性理论对刀具破损进行应力分析的基础上,指出提高刀具寿命的措施。
Based on the analysis of crack and residual stress, mechanical property of Laser Rapid Forming sample is studied.
在裂纹和残余应力分析的基础上,研究激光快速成形件的力学性能。
Based on the theory analysis of the equal contact stress inner curve, the experiment research is discussed, and the project of experiment is also designed.
在理论分析等接触应力轨道曲线的基础上,对试验研究进行了探讨,并设计了相应的试验方案。
Based on the principles of image morphology and several basic operations, this paper proposes applying the image morphology technology in the analysis of photoelastic stress.
在讨论和分析图像形态学原理和几种基本运算的效果基础上,提出了将图像形态学技术应用到光弹应力分析中。
Based on the monitoring for expressway tunnel construction and finite element analysis, the paper analyzed the country rock stress state in the process of tunnel construction.
通过高速公路隧道施工监测及有限元数值分析方法,分析隧道施工过程中围岩应力变化情况。
Based on computation and analysis of seepage field, pore water pressure of inter-slice is defined in the effective stress method.
有效应力分析方法中依据渗流场的计算分析得到条间孔隙水压力。
Based on the elastic stress analysis, the stresses of the hoop fiber reinforced steel pressure vessels (compressed natural gas bottle) under internal pressure are obtained.
用弹性理论分析方法,得到了环向纤维增强钢压力容器(压缩天然气气瓶)在内压作用下的应力。
Ground Stress Analysis-Reversed is based on Geotechnical engineering safety monitoring, which USES monitoring data to do in some area.
地应力位移反分析是建于岩土工程安全监测的基础上的,利用安全监测得到的位移值,对该地段的初始应力场进行反演。
Based on the analysis and testing results, it can be proved that the stress in the vessel is still at elastic state.
经实测和理论分析证明,其应力水平在设计压力下仍处于弹性范围。
The fatigue life is obtained by using specimens without crack and by a special analysis based on local stress-strain method in which remembrance characteristics are considered.
采用无裂纹缺陷试件进行疲劳试验得到试件的疲劳寿命,同时利用考虑了记忆特性的局部应力应变法对试件的疲劳寿命进行定量分析。
The introduces the new method for strength checking of vertical vessel bearing support based on theoretical analysis of local stress.
根据局部应力的理论分析,提出直立容器支承式支座处强度校核的新方法。
Finally, based on the stress fields of FEM analysis, the most dangerous sliding mode and the minimum anti-sliding factor are searched by parallel recombination simulated annealing algorithm.
最后基于该方法计算的应力场,应用并行组合模拟退火算法搜索坝基最危险滑动模式及相应的最小安全系数。
Based on the data analysis results, the laws of the stress change, distribution and transfer are primarily revealed, which can provide a scientific fundament for tank lifting in scenario and safety.
经过数据分析,揭示了罐壁应力变化、分布与传递的内在规律,为确保今后油罐举升方案的制定和安全实施提供了科学依据。
Based on the spatial analysis method of elasticity mechanics, the relation between the shape of the plane stope and horizontal construction stress was analysed.
利用弹性力学的空间分析方法分析了采场平面形状与水平构造应力之间的关系。
Stability method based on slip surface FE stress and shear strength reduction method are two principal methods for FEM slope stability analysis.
基于滑面上应力分析法和强度折减法是边坡稳定有限元分析方法中两类主要的方法。
Based on the homogenization theory, the multi-scale analysis methods of the viscoelastic property, and the effective thermal stress relaxation laws are studied.
基于均匀化理论研究了复合材料粘弹性分析的多尺度方法,以及复合材料等效热应力松弛规律。
The thought of this paper is to discuss on and analysis to dynamic response of HSMS under impact load, and estimate its mean life based on noted stress fatigue design method.
本文的主导思想是讨沦和分析冲击载荷下螺旋弹簧质量系统的动态响应,并应用名义应力疲劳设计方法估计其平均寿命。
Based on the mechanical analysis, the equation between stress and loop length is set up, and it is proved by testing result of kitted fabrics with different stitch densities.
针织物受力时产生起拱变形现象,通过力学和数学分析,建立了力与线圈长度的关系式。
Based on the feature of subgrade construction and with the analysis of the observed settlement data, a series of stress-strain isochrones are arranged in this paper.
本文基于高速公路路基填筑的特点,通过实测沉降资料的分析,整理出一系列应力应变等时曲线。
The CM composite foundation is a kind of new type composite ground based on working principle, cushion effect, stress-passing characteristic and stress analysis of the single pile foundation.
CM桩复合地基是在原有的单一桩复合地基的工作机理、垫层效应、传力特性、应力分析的基础上提出的一种新型复合地基。
The CM composite foundation is a kind of new type composite ground based on working principle, cushion effect, stress-passing characteristic and stress analysis of the single pile foundation.
CM桩复合地基是在原有的单一桩复合地基的工作机理、垫层效应、传力特性、应力分析的基础上提出的一种新型复合地基。
应用推荐