These two methods can be used to strengthen and repair surface for large-scale axis parts and bore of bearing.
这两种方法适合大型轴类零件的表面强化和修复。
The Dojo Chart2D object usually consists of four parts: theme, plot, axis and series (data).
DojoChart2D对象通常包含4 个组成部分:主题、图、轴(axis)和系列(series)数据。
In the end, arc, processing and ground is large diameter conical parts, along the X axis into to, is the same, but the linear cutting speed is constantly changing, the cutting surface quality changes.
在加工端面、圆弧、圆锥以及蹊径直径相差较大的零件时,沿X轴方向进给时,固然进给速度不变,但切削线速度却不断地变化,导致加工表面质量变化。
The center axis of the part has inclusion defects as well as porosity and thus is suitable only for parts where this can be machined away.
零件的中心轴附近存在缺陷和孔隙,因此仅适用于能将这些机加工去除的零件。
An example of this program category of the long axis CNC machining of parts programming.
本程序实现一个实例化的长轴类的零件数控加工编程。
All axis adopt high quality parts are all 45 steel modulation processing and processed.
所有轴类零部件均采用优质45号钢材调制处理加工而成。
The rotor has two parts, the permanent magnet part and the electric excitation part, which have the same axis direction and share one armature.
该电动机的转子由两部分组成——永磁体部分和辅助电励磁部分,它们同轴向安装,共用一个电枢绕组。
The rotor of the motor consisted of permanent part and electrical magnetic part, the two parts had the same axis direction and share one armature.
该电动机的转子由永磁体和辅助电励磁两部分组成,同轴安装,共用一个电枢绕组。
This instrument is used for measuring roundness, axis straightness, coaxality and circular run out error of shaft parts.
该仪器可用于圆度、轴线直线度、同轴度和径向跳动误差等项目的测量。
This paper introduces the design of sample axis in the process of machining axis spare parts with hydraulic pressure copying lathe.
本文介绍了液压仿形车床在加工轴类零件过程中样轴的设计方法。
The main production process all kinds of gear, worm gear, sprocket, spline, the long axis, filament rod mechanical parts.
主要制作加工各类齿轮、蜗轮、链轮、花键、长轴、长丝杆等机械配件。
The main parts include pump body, pump cover, impeller, axis, sealing rings, intermediate support, sealing and suspension parts and other components.
泵主要由泵体、泵盖、叶轮、轴、密封环、中间支架、密封和悬架部件等组成。
Because of axis line deflection and asymmetric load distribution of rotary kiln, the support parts may break, spall, or erode due to the induced overlarge contact stresses.
回转窑运行中由于轴线偏差,支承载荷分配严重不均,导致支承部件因接触应力过大而产生压溃、剥落和点蚀等现象。
Bearing for pivot of the axis is used as a supporting shaft and parts on the shaft, the shaft usually has two poims.
滚动轴承作为轴的支点用来支承轴及轴上零件,通常的轴都有两支点。
The design computation of important mechanical parts such as axis and wheel is studied in the third paragraph.
第三章研究了机械设计中典型零件的设计计算方法。
Our multiple axis CNC turning centers enable us to manufacture very complex parts with shorter lead times in both production and prototype size lots.
数控车削中心能够在较短的时间内生产非常复杂的部件,任何产品和任何原型的部件都可以生产。
As a result, this pedestrian street becomes the main axis of the buildings composition, which consists of three main parts.
因此,这个步行街变味了该银行大厦的主轴线,大厦主要包括三个部分。
Chief axis is mainly parts of lifting machine, and it is very necessary to design on failsafe design.
主轴是提升机的主要部件,对其进行可靠性设计很有必要。
Our leading products are: IVAK brand rotation axis with seal, O-ring, supporting the production of automobile and motorcycle shock absorber rubber parts.
本厂主导产品为:IVAK品牌旋转轴用骨架油封、O型圈,配套生产汽车、摩托车减震器用橡胶件。
Cutting processing after forming can be carburizing processing, used to make the surface hard, center of high toughness instrumentation parts and axis wear parts.
切削加工成形后可以进行渗碳处理,用来制造表面硬、中心韧性高的仪器仪表零件及轴类耐磨件。
Parts assembling, micro motor axis press-in and other workings like riveting, punching and cutting.
零件装配,微型马达轴心压入,其它铆合,冲孔,切断等作业。
Butterfly valve is closed parts (valve flap or disc for disc), around the valve axis of rotation to achieve the open and close a valve, in the pipeline mainly as shut off and throttling effect.
蝶阀是指关闭件(阀瓣或蝶板)为圆盘,围绕阀轴旋转来达到开启与关闭的一种阀,在管道上主要起切断和节流作用。
Customized according to different industry. Optional parts: automatic up-down table, rotary axis, servo system...
针对不同行业用户量身定做,可选配件:全自动升降平台、旋转轴、伺服系统。
The axis, the supporting rotation components and rotates together with it transmits the movement, the torque or the bending moment machine parts.
轴,支承转动零件并与之一起回转以传递运动、扭矩或弯矩的机械零件。
5 axis program, shows bar advance to stop, turning, milling, drilling, subspindle grab, cutoff, subspindle "other end" machining, subspindle release into parts catcher.
5轴程序,显示栏提前停止转动,铣,钻,副主轴抢,截止,副主轴“的另一端”加工,进料器副主轴释放。
5 axis program, shows bar advance to stop, turning, milling, drilling, subspindle grab, cutoff, subspindle "other end" machining, subspindle release into parts catcher.
5轴程序,显示栏提前停止转动,铣,钻,副主轴抢,截止,副主轴“的另一端”加工,进料器副主轴释放。
应用推荐