This paper introduces a kind of method for auto-measuring dial gauges reading in 0.
本文提出了一种对指示表(百分表、千分表)实现自动检测的方法。
This paper introduces a kind of method for auto-measuring dial gauges reading in 0.
提出了一种基于超声波电机的指示表自动检定仪进给机构的设计方法。
This paper introduces the design of the device of auto-measuring radon continuously.
介绍了基于FPGA的连续自动测氡仪的测量系统的设计。
Oil volume auto-measuring monitor is a fully automatic instrument of measuring oil level of automotive vehicles.
机油容量自动测量仪是一款全自动测量机动车机油油位的装置。
This new volume auto-measuring instrument can be widely applicable to measure the liquid change status of all liquid substances.
该新型容量自动测量装置可广泛适用于测量一切液态物质的液面变化状况。
In this paper, the design process of the CCD wood board auto-measuring system was stated in detail in aspect of the hardware and software.
本文从硬件和软件两方面详细地阐述了CCD木材几何尺寸自动检测系统的设计过程。
The function and realization of thermo-emf auto-measuring system of Pt-Rh thermocouple wire for wire-melting-method are introduced in this paper.
介绍了熔丝法铂铑偶丝热电势自动测量系统的功能与实现方法。
This article introduces a kind of intelligent measuring system, which accords with the rule of measuring for tapered roller bearing, and can actualize auto-measuring for SDW and auto-picking.
介绍的圆锥滚子端面侧摆智能检测系统,符合圆锥滚子轴承检测规程要求,可以实现圆锥滚子端面侧摆自动检测和自动分拣。
Furthermore, in order to test the designed antennas, the latter part of the article gives the design of the Auto-Measuring System for Antenna to get the amplitude patterns of the tested antennas.
另一方面,为了检测设计的天线性能,论文的后半部分构建了天线自动测量系统来测量天线的幅度方向图。
The method will not only be used for measuring the two wheel alignment parameters but also help mechanician to adjust the auto wheel parameters effectively.
该方法不仅可用于测量两轮对中参数,而且有助于机械工对车轮参数的有效调整。
A method of auto measuring eye biology data with image processing technology is presented here.
介绍了利用数字图像处理技术自动测量眼前节生物数据的方法。
This paper studies the method of auto balancing bridge to precisely measure inductance L, capacitance C, resistance R(namely LCR)by measuring the high and low terminal vector voltages.
本文研究了利用自动平衡电桥方法,通过测量高端和低端两路矢量电压来精确测量电感L、电容C和电阻R(即LCR)。
Discussing how to improve the accuracy of auto measuring and defecting system by selecting the best plan, taking the group measuring method and computerizing data processing.
从选择最佳测试方案、采取组合测量的测试方法以及测试数据的微机化处理三方面出发,探讨了如何提高自动检测系统测试精度的问题。
In the fourth part, a Vickers hardness auto measuring system is developed based on machine vision.
在理论研究的基础上,本文的第四部分中设计了一个机器视觉维氏硬度自动检测系统。
An auto measuring system of aerial camera lens is presented, which substitutes linear array CCD sensor for reading microscope to measure the focus of aerial camera lens.
提出了一种以线阵CCD固态传感器取代读数显微镜的航空相机镜头焦距测量系统。
The auto measuring system of 3d human body based on CCD (charge coupled devices) and infrared sensor technology are presented.
提出并研究了基于CCD(光电藕合器件)与红外传感技术的三维人体尺寸自动测量系统。
The method and design of check measuring tool for front-cover hinge in auto is introduced, and this tool is easy to operate and has a promotional value.
介绍了汽车前罩板铰链检具的检测方法及检具结构设计,该检具操作简便,具有一定的推广价值。
To monitor the movement process of fissured water, self-designed a portable and microminiature device for auto - measuring the low flow rate.
为了测定裂隙岩体渗流的动态变化过程,本文自行设计了一种便携式、超小型的低流速自动测定装置。
Also design method of auto check measuring control system is present.
同时简要叙述了自动检测系统控制方法的设计及实现。
In this dissertation, we research on the controlling and measuring technology of highway tunnel lighting, illuminometer, luminometer and an auto-control system were developed.
本文研究高速公路隧道照明测控技术,开发用于隧道照明检测的照度仪、亮度仪及隧道照明自动控制系统。
The technology of real time auto-correction by using multiple reference sources in measuring circuit in resistance transducer is introduced.
介绍了在电阻式传感器测量电路中采用多基准源进行实时自校正的技术。
The measuring principle and the software of a computer-aided three-dimensional geometry measuring system used on the assembly line of an EVECO auto-car are presented.
介绍了最近研制成功的依维柯汽车底盘横梁在线三维几何量微电脑测量系统的测量原理和测量软件。
Sampling examination by metallographic test was the traditional method for measuring the depth of the quenched layer in crankshaft, which could not meet the needs of the production of auto industry.
传统的曲轴淬火层深度测试方法是金相抽检,不能满足汽车工业生产需要。
An idea of transforming a common milling machine into a half automatic nc system with auto -measuring device is presented. The control principle is introduced, too.
提出了将普通磨床改装成带主动测量装置的半自动数控磨床的方案,并介绍了控制原理。
In this paper, the measuring method of animal fibers diameter based on auto-focus technology for optical microscope is studied.
毛绒纤维直径是评判此类纤维商业价值重要标准之一,本文主要研究基于光学显微镜自动聚焦的纤维直径测量技术。
The application shows that the torque measuring equipment has high precision, easy fixing and adaptation to auto-control in some production process.
实际应用表明,该转矩测量仪精度高、安装简单,便于某些生产过程的自动控制。
The Auto Body coordinate Laser Scanning Sensor Basing On Collaboration Target is a 2D or 3D coordinate measuring system using a kind of measuring principle which named four-beam laser scanning.
基于合作靶标的激光扫描车身坐标测量传感器,是运用四光束激光扫描测量原理,综合运用激光、光电、精密测量等技术进行非接触二维或者三维坐标测量的检测系统。
The high accuracy center measuring method of marked points technique based on the fitting sub-pixel edge, and the methods of coded points designing and coded points auto-detecting were investigated.
采用编码点和非编码点相结合的方法实现摄影测量中对应点匹配技术,讨论了标记点的中心亚像素定位方法、两类标记点的识别及编码标记点的解码方法。
The results show that the method will not only be used for measuring the two of wheel alignment parameters, but also help mechanician to adjust the auto wheel parameters effectively.
计算结果表明,该方法不仅可以快速测量出两车轮定位参数,并可有效地指导车辆检修人员进行车轮定位参数的调整。
The results show that the method will not only be used for measuring the two of wheel alignment parameters, but also help mechanician to adjust the auto wheel parameters effectively.
计算结果表明,该方法不仅可以快速测量出两车轮定位参数,并可有效地指导车辆检修人员进行车轮定位参数的调整。
应用推荐