At the special request of the flux-cored wire welding underwater, the welding arc control system is developed.
根据药芯焊丝水下焊接的要求，研制了一套水下焊接电弧控制系统。
It describes the feature of pulse plasma arc welding and introduces the general design thinking and its composition of SCM control system for the pulse plasma arc welding.
简述了脉冲等离子弧焊接的特点，介绍了该脉冲等离子弧焊接的单片机控制系统总体设计思想及其组成。
Based on the characteristics of MMA welding process, a new control system of IGBT inverter arc welding power source is developed.
针对手工焊条电弧焊(MMA)弧焊过程特点，建立了绝缘栅型晶体管逆变式弧焊电源控制系统。
Intelligence arc furnace, which makes use of neural network model and numerical model, combines expert system and fuzzy technology, can control the metallurgical quality.
智能电弧炉是应用神经网络模型与数字模型、专家系统、模糊技术等结合起来控制冶金过程。
Experimental results show that the control system has fast dynamic response and improves arc stability effectively with the waveform control.
实验结果表明，该控制系统动态响应快速，配合波形控制有效地提高了电弧稳定性。
The result shows that this control system responds quickly with high control precision and can control the arc voltage steady.
试验结果表明该控制系统响应速度快，控制精度高，可实现对电弧电压的稳定控制。
In this paper, the method integrating CPV350 inverter welding machine to arc welding robot control system is introduced.
介绍了CPV350型逆变电焊机与弧焊机器人控制系统的连接方法。
A plasma torch's height control system which is based on plasma arc voltage measuring is introduced.
设计了一种基于等离子电弧电压检测的割炬高度控制系统。
The results indicate that the arc heater can run with transient parameter when the power supply system, air supply system and control system were reformed appropriately.
研究结果表明：供电、供气、控制等系统经过适当改造，电弧加热器可以实现变参数运行。
A control system based on single chip microprocessor is designed for submerged arc welder with magnetrol power source.
针对磁放大器式电源埋弧自动焊机设计了单片机控制系统。
It is the first fully computerized system for the process control of arc refiners in China.
该系统是国内第一套用于微碳铬铁电弧精炼炉过程控制的全计算机化的控制系统。
Several main random noises of arc furnace are identified by fuzzy cluster analysis method. A fuzzy control system of arc furnace is designed, and good control result has got.
用模糊聚类分析的方法对电弧冶炼炉的几种主要随机干扰进行辨识，并在此基础上设计了电弧冶炼炉模糊控制系统，取得了良好的控制效果。
Based on this the design of arc furnace electrode regulator adaptive control system is made, the rule of discrete-time model reference adaptive control is proven.
在此基础上进行了电弧炉电极调节自适应控制系统的设计，推导出了递推的离散时间模型参考自适应律。
A control system based on monolithic computer 80c196kc is designed for IGBT welding inverter with submerged arc. The software, hardware, and control principle of the system are introduced.
针对IGBT逆变埋弧焊机设计了基于单片机80c 196kc的控制系统，介绍了系统的软、硬件组成和控制原理。
The automatic control system of welding torch height for arc welding is developed.
设计了一种焊炬高度焊接自动控制系统。
In this research works, the authors, using the optical welding robot, have controlled arc for improving the welding quality. The control system consists of TV-camera, micro-computer and image memory.
研究中使用了由个人微计算机、图象处理装置及焊接机器人构成的正规视觉机器人，对弧长进行计测控制，以提高焊接质量。
This paper presents hardware and software design processes on control system of the soft-switching arc welding inverter power source.
给出了软开关弧焊逆变电源控制系统的硬件系统设计和软件系统设计。
This paper introduces the first microcomputer Control system of arc furnace for tin smelting in China.
本文介绍我国第一套炼锡电弧炉微机控制系统。
Microcomputer controlled arc welding inverter power source can raises greatly controlled level of pulse MIG welding for its flexible control, high accuracy, high system response.
采用微机控制的弧焊逆变电源控制灵活、精度高、系统响应高的特点，能够极大提高脉冲MIG焊的控制水平。
AN arc welding robot control system based on CAN bus is introduced.
介绍了一个基于CAN总线的弧焊机器人控制系统。
In the course of laser-arc hybrid welding, the high frequency caused by drawing arc interfered the control system which make the laser and electric arc not able to realize the hybrid welding.
激光-电弧复合焊接过程中，由于引弧产生的高频干扰了激光器的控制系统，造成了激光和电弧不能实现复合焊接。
Based on just mentioned put forward a basic thought of realizing the automatic control system of keyhole plasma arc welding and designed ensemble control programme.
据此提出了实现等离子弧焊闭环质量控制的基本思想并设计了总体控制方案。
The control matrixes of system arc nonlinear function matrixes for state variables.
系统的控制矩阵是状态变量的非线性函数矩阵。
The new arc suppression coil control system consists of line selection device and automatic tuning device which communicate by CAN bus.
新型消弧线圈控制系统采用选线装置和调谐装置两套装置共同组成，两套装置通过CAN 总线进行通信。
With the computer control technology, the teaching system of arc welding robotic numerically controlled positioner is designed and realized.
本文采用微型计算机控制技术，设计实现了弧焊机器人用数控焊接变位机的示教再现系统。
With the micro-computer control technology, the teaching system of NC arc welding robotic positioner is designed and realized.
采用微型计算机控制技术，设计实现了任意位置定位的数控焊接变位机的示教系统。
Control system of the rotating welding arc sensor was developed by the authors. It was timing controlled by the prior single chip microcontroller 80c196kb.
介绍了自行开发的旋转电弧焊缝自动跟踪系统，采用性能更高的80c196 K B单片机实时控制。
The resonant soft switching inverter arc welding power source uses LCL type structure in the main circuit, and selects phase shifting pulse wide modulation technique in the control system.
研制的谐振式软开关弧焊逆变电源，主电路采用新型LCL结构，控制系统选用恒频移相调脉宽控制方案。
The system USES fuzzy control theory to realize the motion control of electrodes of submerged-arc carbide furnace.
本系统引用模糊控制对埋弧电石炉三相电极升降进行控制。
The system USES fuzzy control theory to realize the motion control of electrodes of submerged-arc carbide furnace.
本系统引用模糊控制对埋弧电石炉三相电极升降进行控制。
应用推荐