• With the fabricated preforms, the pressure casting process of porous aluminum alloy was studied.

    利用所制备预制块,研究了多孔铝合金加压铸造工艺

    youdao

  • The coating behavior of aluminum alloy lost foam casting ( LFC) process has been investigated.

    研究铝合金消失铸造过程中的涂料行为

    youdao

  • Shell aluminum alloy die-casting molding, high strength, high voltage electrostatic powder coating, corrosion resistance.

    外壳铝合金压铸成型强度,表面高压静电粉末喷涂,耐腐蚀。

    youdao

  • The short fiber reinforced aluminum silicon alloy gradual composites are manufactured by squeeze casting, and the structures and the wear resistance of the composites are studied.

    采用挤压铸造技术制备纤维增强合金梯度复合材料,研究类材料凝固组织耐磨性能。

    youdao

  • The equipment, mould structure and processing of manufacturing aluminum alloy handle stems of bicycle using extrusion casting method are presented.

    介绍挤压铸造制造铝合金自行车把立管设备结构工艺流程

    youdao

  • Company has mold, injection molding, metal, aluminum alloy die-casting and other ancillary works.

    公司下设有模具注塑五金铝合金压铸等配套厂。

    youdao

  • Material: high quality aluminum alloy die-casting molding, high-pressure cast aluminum lamp body. Pure silicone seal, tempered glass.

    材料优质铝合金压铸成型压铸硅胶密封圈钢化玻璃

    youdao

  • Shell made of high strength aluminum alloy casting off the surface after blast cleaning by high voltage electrostatic spray.

    壳体采用强度合金一次性压铸成型表面高速抛丸清理后高压静电喷塑

    youdao

  • It is suitable for roughing to finishing machining of heat-resistance alloy, ti alloy, casting iron and aluminum alloy.

    适用耐热合金钛合金铸铁铝合金粗加工精加工

    youdao

  • The coating behavior of aluminum alloy lost foam casting (LFC) process has been investigated.

    研究铝合金消失铸造过程中的涂料行为

    youdao

  • The hot dip aluminum has been carried out to research the formation and dissolution of the intermetallic layer between die casting die and aluminum alloy.

    为了研究铸模铝合金金属化合物形成分解过程进行试验。

    youdao

  • Our company provides a package deal, including product research-and-development, mold design, aluminum gravity casting, die-casting, T6 heat treatment of aluminum alloy and machining.

    公司提供产品研发模具设计铝合金重力铸造压铸、铝合金T6处理、机械加工等整套生产工艺流程服务。

    youdao

  • Origination of casting defects in aluminum alloy motorcycle damping cylinder in metal mould casting was analyzed.

    分析了金属铸造铝合金摩托车减震铸造缺陷产生原因。

    youdao

  • The structural characteristics of aluminum alloy cover was analyzed, and the design of pouring system and die-casting die structure were introduced.

    分析了铝合金端盖压铸结构工艺性特点介绍了压铸模浇注系统模具结构设计

    youdao

  • Numerical simulation of filling and solidification of large aluminum alloy support frame in indirect casting was conducted based on FDM.

    基于有限差分法大型铝合金支架间接挤压铸造充型凝固过程进行了数值模拟

    youdao

  • Studied the annealing institution of 3003-o aluminum alloy strip for drawing is researched, while the chemical composition and casting, hot rolling, the cold rolling, process were determined.

    研究了深冲用3003-o铝合金带材合理生产工艺,化学成分铸造热轧冷轧工艺确定情况下,试验研究成品退火工艺制度

    youdao

  • The advantages of housing parts with aluminum alloy substituting for zinc alloy have been described, focusing on the operation and key points of design of the aluminum alloy die casting die.

    分析箱体零件合金铝合金优点论述了模具工作过程设计要点

    youdao

  • The structural characteristics of the aluminum alloy tap part were analyzed, and the design of pouring system and die-casting die structure were introduced.

    分析了铝合金水龙头零件结构工艺性特点介绍了压铸模浇注系统模具结构设计

    youdao

  • The die construction, running principle and features, technological process flow, technique parameters and product performance of aluminum alloy integral naves by gravity die casting are described.

    阐述了金属型铸造摩托车铝合金整体车轮模具结构工作原理特点、铸造工艺流程工艺参数产品性能

    youdao

  • Under traveling magnetic field, casting ZL102 aluminum alloy thin-section castings' best process is: using stainless steel as bottom mold, voltage is between 220v-235v.

    最终得到移动磁场铸造ZL 102薄壁件的最佳工艺条件为:不锈钢电压220v- 235v。

    youdao

  • Feeding effect can be improved with qualified casting using side riser gating system for plate or heavy concave aluminum alloy casting.

    对于平板类厚大凹型铝合金铸件采用边侧冒口浇注系统提高铸件的补缩效果,生产合格铸件。

    youdao

  • Residual stress distribution for engine cylinder body made of casting aluminum alloy was investigated completely using X-Ray nondestructive detection method.

    利用X射线无损检测方法,对铸造铝合金制造的某发动机汽缸残余应力分布进行了全面分析

    youdao

  • The special slot is adopted in the rotor of the induction machine with compound cage rotor and there is two materials of casting aluminum and copper iron alloy in the slot.

    复合转子感应电动机转子采用特殊形,且槽含有铁合金两种材料

    youdao

  • The surface and inner qualities of aluminum alloy ingot by electromagnetic casting (EMC) have been investigated and compared with those of the direct casting (DC) one.

    分析电磁铸造铝合金表面内部质量与普通连续铸造铸坯进行了对比

    youdao

  • Abstract: Effects of vacuum degree and filling temperature on the casting length of A356 aluminum alloy wire prepared by vacuum suction casting were investigated.

    摘要:采用真空法制A356铝合金材,充型温度和绝对真空度对丝材长度影响进行了研究

    youdao

  • The internal quality of aluminum alloy castings that were produced by Vacuum Differential Pressure casting was studied with both theory and practice.

    真空铸造生产铝合金铸件性能进行研究,从理论和实践量方面论述了其较好的铸件内在性能

    youdao

  • In this paper, the effects of pressurizing value on aluminum alloy crystal structure and the mechanical properties in squeeze casting process have been studied.

    本文研究挤压铸造时不同加压压力铝合金结晶组织机械性能影响

    youdao

  • The quality precision of the aluminum alloy in squeezing casting with electromagnetic pump quantitative pouring can reach up to 2%.

    结果表明,电磁定量浇注挤压铸件质量精度达到2 %。

    youdao

  • The quality precision of the aluminum alloy in squeezing casting with electromagnetic pump quantitative pouring can reach up to 2%.

    结果表明,电磁定量浇注挤压铸件质量精度达到2 %。

    youdao

$firstVoiceSent
- 来自原声例句
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定