The heat resisting of sample after heat treating goes bad.
经热处理后试样的耐热性变差。
Straightening of the shaft after heat treatment is a key process.
在轴杆类零件生产过程中，热处理后校直是一道关键工序。
Objective To study the truth of first aid in spot after heat burning.
目的：了解儿童热力烧伤后现场急救措施的真实情况。
The product is cubic antimony trioxide after heat treatment in vacuum.
经真空干燥处理后，产品为立方晶型的锑白。
The granule surface of starch had little change after heat-moist treatment (HMT).
其中湿热处理前后淀粉的颗粒形貌变化较小。
The modulus of CFRPET after heat-treatment agrees perfectly with reinforcement law.
热处理后试样的弹性模量与增强定律十分吻合。
Material oxidation, such as oxidation spot, serious after heat treatment of oxide film.
素材氧化严重，如氧化斑，热处理后氧化膜。
Excellent color gloss retention after heat aging Excellent chalk and moisture resistance.
高温下之色泽及光泽保存性、抗粉化性及湿气性。
The hot air after heat exchange is discharged from the air outlet at the top of the dryer.
经过热交换的热风由烘干机顶部中间的排风口排出。
After heat and moisture transfering, the outdoor air is discharged directly through outlet.
送入的新风经过热湿交换后直接由排风口排出室外。
In fact, there is no difference with them ultimately, I mean, in the earth after Heat Death.
其实，混同于他们和不混同于他们最终没有什么不同，我的意思是在地球热寂之后。
Hardness of the substrate was increased and hardness of the coating was not varied after heat-treatment.
调质后涂层硬度不变，而基体硬度有较大的提高。
Large area of spalling accured on the work layer of high-Crcentrifugal cast iron roll after heat treatment.
高铬离心复合铸铁轧辊辊身工作层在热处理后发生大面积剥落。
Gear after heat treatment with high hardness and strength, and shaft installed in the replaceable shaft sleeve.
齿轮经热处理有较高的硬度和强度，与轴一同安装在可更换的轴套内运转。
It was revealed from results of XRD that the crystal structure of coating had not changed after heat treatment.
由XRD实验结果可知，热处理后镀层的晶体结构未发生改变。
Study the influence to hardness value of coating before and after heat treatment with ultrasonic disperser craft.
研究了超声波分散工艺对镀层的镀态硬度及热处理硬度的影响。
Objective To measure the plate glass refractive indices and find its changeable regularities after heat treatment.
目的探索平板玻璃受热后折射率的变化规律。
Next, after heat treatment, the mechanical properties and damping capacity of above deformed alloy was investigated.
接下来，研究了上述变形态镁合金经热处理后的力学性能和阻尼性能。
The castings comes to the technique request of the foreign original package accessories completely after heat treatment.
铸件经热处理后完全达到了国外原装配件的技术要求。
Its subject coverage includes: role of hydrogen, factors affecting embrittlement after heat treatment, and preventive measures.
它的主题涉及的范围包括：氢的作用、热处理后影响脆化的因素、预防措施。
This kind of material is compounded using soft fibers and suitable resin matrix and formed plate or sheet after heat compression.
这类复合材料主要利用柔软的纤维和适量树脂基体进行复合，经压制形成板材或片材使用。
A higher gear after heat treatment the hardness and strength, and the shaft can be replaced with bushings installed in the operation.
齿轮经热处理有较高的硬度和强度，与轴一同安装在可更换的轴套内运转。
Observation on ultrastructure of mesophyll cell in young grape plants after heat acclimation and SA pretreatment under high temperature.
利用透射电镜对经水杨酸(SA)和高温锻炼处理过的葡萄幼苗叶肉细胞进行了超微结构观察。
The alloys with different thickness after heat-treated at middle temperature for 4 hours could show better comprehensive electrochemical properties.
不同壁厚的贮氢合金经中温热处理4小时后可获得相对最佳的综合电化学性能。
This is 6000 serial aluminum-magnesium-silicon alloy after Heat treatment with relatively high strength and corrosion reistance and good uniformity.
6000系列为铝、镁、硅合金，是一种热处理型的耐腐蚀性合金。强度和耐腐蚀性较高，均匀性皆较好。
The results showed that the contents of digestible starches went up apparently, and the resistant starches reduced significantly after heat treatment.
实验结果表明：经热作用的淀粉，其可消化淀粉含量大幅上升，抗消化淀粉含量显著减少。
This is 6000 serial aluminum - magnesium - silicon alloy after Heat treatment with relatively high strength and corrosion reistance and good uniformity .
6000系列为铝、镁、硅合金，是一种热处理型的耐腐蚀性合金。强度和耐腐蚀性较高，均匀性皆较好。
Meanwhile, high surface hardness after heat treatment, the coating surface formed into the amorphous and crystalline mixture, the hardness is up to 1200hv.
同时表面硬度高，经热处理后，其镀层表面形成非晶态和晶态的混合物时，硬度可达1200 HV。
The dynamic performance, corrosion rate and coking time of the mortar were tested under normal temperature and after heat treatment and corrosion individually.
并用该树脂与固化剂、惰性添料配制了胶泥，测试了其常温、热处理及腐蚀后的胶泥的力学性能、腐蚀率及焦化时间。
According to its character, sepiolite is used to make adsorption tissue with softwood pulp after heat activation, the paper can roll into stick as cigarette filter tip.
本文实验就是利用海泡石的这一特性，先将海泡石进行高温活化，再将其与木浆混合配抄吸附型薄页纸，此纸可以卷制成滤嘴棒作卷烟滤嘴。
应用推荐