EA stands for effective address, which is a main memory address as viewed from the main PPE program.
EA表示有效地址,这是从主ppe程序中看到的主存地址。
CPU is in an iron box together with other devices such as disk drives, a main memory and a switching power supply etc.
CPU同其它设备如磁盘驱动器、内存和开关稳压电源等被装在一个铁箱子中。
Further, when the management unit (103) receives an abnormal value trigger, the management unit sequentially stores data output from the measurement unit (101) at a main memory unit (104).
另外,如果管理器103接收到异常值触发,则管理器103顺序将从测量器101输出的数据存储在主存储器104中。
Similarly, as part of acquiring the monitor when entering a synchronized block, local caches are invalidated so that subsequent reads will go directly to main memory and not the local cache.
与此类似,作为获得监视的一部分,当进入一个同步块时,本地缓存失效,使之后的读操作直接进入主内存而不是本地缓存。
You could consider these "thread-local" copies of variables to be similar to a cache, helping the thread avoid checking main memory each time it needs to access the variable's value.
您可以将变量的这些“线程局部”副本看作是与缓存类似,在每次线程需要访问变量的值时帮助它避免检查主存储器。
When a program writes to memory, the processor only modifies the line in the cache, but does not update main memory.
当一个程序写入存储,处理器仅仅只会修改缓存线,而不会更新主要的存储内容。
For DB2, the largest consumer of system main memory is its buffer pool, which is basically a single, large Shared memory region.
对于DB2,系统主存的最大消耗者是它的缓冲池,这个缓冲池基本上是一个单独的、较大的共享内存区域。
Furthermore, compressed pages of a DB2 table space remain compressed in the DB2 buffer pool in main memory.
而且DB 2表空间的压缩页在主内存的db2缓冲池中仍保持压缩。
The SPU queues a DMA PUT to transmit the buffer back to main memory.
SPU对DMA PUT进行排队,从而将缓冲区传输回主内存。
The SPE cannot read main memory directly, but instead must import and export data between the local store and main memory using DMA commands to a unit called the memory flow controller, or MFC.
SPE不能直接读取主存,相反地必须通过对内存流控制器(或mfc)的单元使用dma命令来在本地存储和主存之间导入和导出数据。
The PowerPC uses a load/store (also called RISC) instruction set, which means that the only time it accesses main memory is for loading into registers or copying a register to memory.
PowerPC使用了加载/存储(也成为RISC)指令集,这意味着访问主存的惟一时机就是将内存加载到寄存器或将寄存器中的内容复制到内存中时。
The database server available for this study was a Sun X4600 M2 with eight dual-core processors (AMD Opteron 8220) and 256GB main memory.
本研究中使用的数据库服务器是一个Sun X4600M2,具有八个双核处理器 (AMDOpteron 8220)和 256GB主内存。
In main, after returning from foo , namestr is actually a dangling pointer, because foo has freed that memory before returning.
在main中,当从foo返回后,namestr实际上时一个摆动的指针,因为foo已经在返回前释放了那个内存。
The SPU (a) queues a DMA PUT to transmit the contents of buffer #1 and then (b) queues a DMA GETB to execute after the PUT to refill the buffer with the next portion of data from main memory.
SPU (a) 对DMAPUT 进行排队来传输一号缓冲区的内容,然后 (b) 对 DMAGETB 进行排队,从而在 PUT之后用主内存中的下一部分数据重新填充这个缓冲区。
The other main type of processor architecture, CISC (the x86 processor being a popular CISC instruction set), allows for memory access in nearly every instruction.
另外一种主要的处理器体系结构CISC (x86处理器就是一种流行的CISC指令集)几乎允许在每条指令中进行内存访问。
Every location in main memory is numbered with a sequential numeric address by which the memory location is referred.
主存中的每个位置都使用连续的数字地址编号,内存位置就使用这个地址来引用。
All motherboards include a small piece of Read Only memory (ROM) which is separate from the main system memory used for loading and running software.
所有的主板都包括了一小块的只读存储器rom,它与用于载入和运行软件的主系统内存分离。
For example, a compiler may choose to optimize a loop index variable by storing it in a register, or the cache may delay flushing a new value of a variable to main memory until a more opportune time.
例如,编译器为了优化一个循环索引变量,可能会选择把它存储到一个寄存器中,或者缓存会延迟到一个更适合的时间,才把一个新的变量值存入主存。
In theory, a computer chip has two main components: a processor and a memory circuit.
理论上讲,一个计算机芯片只需要两个主要部件:处理器和存储器。
As a result, data is continually written and read from disk rather than from main memory, which is very detrimental to performance.
导致的结果是不断地从磁盘而非主内存读写数据,这是影响性能的重要限制因素。
A TLB miss requires accessing a page table that is stored in the main memory, which consumes considerably more processor cycles.
如果TLB没有命中,那么就需要访问存储在主存中的页表,而这样做需要消耗相当多的处理器周期。
The SPEs access main storage with direct memory access (DMA) commands that move data and instructions between main storage and a private local memory, called a local store or local storage (LS).
SPE用直接内存访问(DMA)命令访问主存储器,可以在主存储器与称为本地库或本地存储(LS)的私有本地内存之间移动数据和指令。
Instead of having multiple directly accessible arguments, you get a pointer into main memory and the SPE has to issue DMA requests to get the pointed-to data from main memory.
它没有使用多个可直接访问的参数,而是使用一个指向主存的指针,SPE需要发出dma请求来从主存中获取指针所指向的数据。
The SPU queues a DMA GET to pull a portion of the problem data set from main memory to a buffer.
SPU对DMA GET进行排队,从而将涉及的数据集的一部分从主内存传输到一个缓冲区。
Queue a DMA PUT to transfer the buffer back to main memory.
对DMA PUT 进行排队,从而将缓冲区传输回主内存。
With a little care, most of the working set of a multiplayer online game can be pulled into the main memory of a large system.
只需稍加处理,多玩家在线游戏的大多数工作集就可以放在一个大系统的主内存中。
He believes SSD is a great technology to replace hard disks in very high IOPS workloads, or when data cannot go to disk and must be held by main-memory (RAM) caches.
他认为,对于IOPS非常高的工作,或者在数据不能写入磁盘,必须缓存在内存(RAM)里面的情况下,SSD是一项替换硬盘的伟大技术。
Since the SPE does not have direct access to main memory, you cannot directly dereference this as a pointer.
由于SPE不能直接访问主存,所以无法直接将其作为一个指针废弃。
Since a DB2 buffer pool is a part of the main memory of the system, the DB2 database manager allocates it for caching tables and index data when it reads or writes to and from media disks.
因为db2缓冲池是系统主内存的一部分,DB 2数据库管理器在它读取或写入磁盘介质时将它分配给缓存表和索引数据。
That's a pretty big difference because the SPE does not have direct access to main memory.
这的确是一个很大的区别,因为SPE并不直接访问主存。
应用推荐