电动机驱动器的控制部基于线性编码器的检测值反馈控制对线性电动机的供给电流。
A control unit of a motor driver feedback-controls current supplied to a linear motor according to a detection value of a linear encoder.
还介绍了电动机的线性化范围和测试标准。
The range of linearisation and testing standard of the motor is also presented.
针对新型五自由度无轴承异步电动机这一多变量、非线性、强耦合的系统,采用逆系统的方法进行解耦控制。
A decoupling control approach based on inverse system has been used for the innovative five degree-of-freedom bearing less induction motor, which is multi-variable, nonlinear and high coupling.
研究旋转型超声电动机在线性坐标平台和旋转坐标转台中的应用技术。
Researches on the technology of application ultrasonic motors in linear coordinate slider and rotary coordinate rotor.
对无轴承永磁同步电动机提出非线性l 2鲁棒控制。
Nonlinear L2 robust control for bearing less permanent magnet synchronous motors (BPMSM) was presented.
一些常见的非线性负载有荧光灯、可控硅电动机启动器以及UPS系统。
Some common nonlinear loads are fluorescent lighting, SCR motor starters and UPS systems.
本文采用非线性系统的微分几何方法实现交流异步电动机的解耦控制和完全线性化,为交流传动系统提出了一种新的控制方法。
Using the method of Differential Geometry, the decoupling control and complete linearization of the induction motor are realized, so a new control method for AC drive system is obtained.
介绍基于旋转型超声电动机的线性坐标平台和旋转坐标转台系统组成及其控制方式。
Introduces its makeup and control mode of linear coordinate slider and rotary coordinate rotor basing on rotary USM.
开关磁阻电动机的转矩是各相电流与转子位置的高度非线性函数,这使得电动机的转矩容易出现脉动。
The torque of switched reluctance motor is a highly non linear function depends on phase current and rotor position, so the torque ripple occurs.
线性开关磁阻电动机的结构简单可靠,对于高精度和快速加工执行器是最好的选择。
Linear switched reluctance motor (LSRM) has never been a popular choice for high precision and high speed motion actuator.
针对开关磁阻电动机运行的振动和噪声问题,在对开关磁阻电机非线性模型进行分析的基础上,将直接转矩控制方法应用到SRM的控制当中。
As to the problems of operating noises and vibrations, this paper applied the Direct Torque control (DTC) technique to SRM's controlling, based on the analysis of the nonlinear model of SRM.
当加上非线性负载如调速电动机驱动器时,会影响正弦电源。电压波形畸变变成非正弦波。
When nonlinear loads, such as adjustable speed motor drives, affect a sinusoidal power source, the voltage waveform is distorted and becomes nonsinusoidal.
设计了一种基于自适应反步控制的永磁同步电动机非线性速度控制器,采用二阶滤波环节平滑速度指令。
A nonlinear speed controller for permanent magnet synchronous motor based on adaptive backstepping control was designed, which USES second-order filter to smooth the speed reference.
本文从非线性参数的分析出发,考虑电机的磁饱和因素,而提出一种混合式步进电动机运行矩频特性的实用计算方法。
The paper presents a practical calculating method for running torque-frequency characteristics of a hybrid stepping motor, considering magnetic saturation and analyzing the nonlinear parameters.
针对新型五自由度无轴承异步电动机这一多变量、非线性、强耦合的系统,采用逆系统的方法进行解耦控制。
A decoupling control approach based on inverse system has been used for the innovative five degree-of-freedom bearingless induction motor, which is multi-variable, nonlinear and high coupling.
异步电动机是一个存在复杂耦合的非线性系统。
Induction motor is a nonlinear system with significant coupling.
通过现代非线性理论如混沌动力学理论研究了永磁式步进电动机的非线性动力学。
The nonlinear dynamics of a permanent magnet stepper motor is studied by means of modern nonlinear theories such as bifurcation and chaos.
针对双线性直流电动机跟踪控制系统提出了一种设计方法。
A new design method of tracking controller and observer by using Lyapunov stability theory for the bilinear d.
通过实验,测量样机的实际电流、电压波形,验证开关磁阻电动机非线性模型的合理性。
The control software is programmed. The experiment waves of current and voltage of the motor are given and analyzed.
介绍了一种步进电动机的非线性自适应控制方案,设计了步进电动机非线性自适应位置控制器。
A nonlinear adaptive control scheme for stepping motors is presented, and a nonlinear adaptive position controller is designed.
永磁同步电动机系统是一类仿射非线性系统。
Permanent magnet synchronous machine system is a nonlinear affine system.
永磁同步电动机是一个复杂耦合的非线性系统。
Permanent magnet synchronous motor(PMSM) is a nonlinear system with significant coupling.
而在其非混沌工作区,通过在永磁同步电动机系统中增加一个线性控制项,则将使原本稳定的永磁同步电动机系统呈现出混沌行为,即实现了系统的混沌化或反混沌控制。
By means of designing a simple linear controller, the PMSM system will also exhibit chaotic behavior in its stable operational regions, which is known as anti-control of chaos or chaotification.
对异步电动机的矢量控制和基于微分几何理论的非线性多输入多输出状态反馈两种解耦控制方案作理论和试验比较研究。
A comparative study of two decoupling control methods based on vector control and nonlinear multi-input-multi-output state-feedback based on theory of differential geometry is researched.
采用线性关系表示异步电动机启动阶段转速与时间的关系,计算出立式行星磨的启动时间范围为7.94~10.32s。
The start-up time of the mill is calculated to be 7.94~ 10.32 s by a linear formulation for the rotating velocity-time relationship to be 7.94~ 10.32 s.
然而永磁无刷直流电动机调速系统是一个非线性、多变量、时变系统,采用传统的PID控制方法进行控制,难以达到良好的控制效果。
However, since the Permanent Magnet BLDCM speed regulating system is a non-linear Multivariable time-varying one, traditional PID control methodology can not be utilized with good performance.
然而永磁无刷直流电动机调速系统是一个非线性、多变量、时变系统,采用传统的PID控制方法进行控制,难以达到良好的控制效果。
However, since the Permanent Magnet BLDCM speed regulating system is a non-linear Multivariable time-varying one, traditional PID control methodology can not be utilized with good performance.
应用推荐