其转动阻力参数是反映托辊工作性能的重要指标。
Its turn resistance parameters are important index of which reflect work function of the support rollers.
托辊是带式输送机的核心部件，其转动阻力参数是反映托辊工作性能的重要指标。
The support rollers are core parts of the belt conveyor. Its turn resistance parameters are important index of which reflect work function of the support rollers.
本文对该类支架的工作阻力、初撑力、支护高度等主要参数进行了分析计算，并对其主要结构进行了设计。
The main parameters of the hydraulic support, such as working resistance, setting load and support height, are analyzed and its main structures are design.
目的分析体循环血管阻力异常在健康人群中的分布特点及心脏功能参数的相关变化。
Objective To analyze the distribution features of systemic vascular resistance disorder in healthy subjects at Guangxi province.
仿真结果表明，该方案在保证伺服系统的快速精确跟踪性的同时，对系统参数变化和阻力扰动具有很强的鲁棒性。
The simulation results show that the control scheme not only can enhance fast tracking performance, but also has a strong robustness to parametric variations and resistance disturbances.
文中介绍了计算链带阻力和驱动功率的公式及设计参数。
This paper represents calculation formulas for chain belt resistance and driving power, giving design parameters.
对其进行样机测试，得到了其送风量、风速、温度、相对湿度、阻力等性能参数。
The test can obtain the air flow, wind speed, temperature, relative humidity, resistance and other performance parameters.
通过对电动摩托车行驶时各种阻力的分析，确定了其核心部件——电动机匹配的参数，并验证了其可行性。
Through the analysis of various resistance of electric motorcycle when driving, its key part-the matching parameter of motor, is confirmed and its feasibility is verified.
对该类支架的工作阻力、初撑力、支护高度等主要参数进行了分析计算。
The main parameters of the hydraulic support, such as working resistance, setting load and support height are analyzed.
水容是继水流阻力之后反映土壤—植物系统中水分动力学性质的又一重要水力学参数。
Hydraulic capacitance is a important hydraulic parameter to describe hydraulic dynamics of soil plant system after hydraulic resistance.
通过刚体理论，推导了考虑空气阻力时标枪的动力学方程组，并在不同出手参数组合的情况下对标枪的出手角进行计算和分析。
The dynamic equations of javelin with air resistance are derived through rigid body theory and the release angles are calculated and analyzed under the combination of different release parameters.
考虑了不同飞行攻角、不同燃料流率下气动参数，包括升力系数、阻力系数和俯仰力矩系数的变化规律。
The change rules of aerodynamic parameters including lift coefficient, drag coefficient and pitch moment coefficient have been analyzed when Angle of attack and fuel flow rate is changed.
提出各几何参数与阻力系数的关系。
The relations between geometric parameters and drag coefficient are developed.
利用实验室建立的旋流板塔脱硫除尘中试系统开展了各种结构参数对系统阻力损失的影响研究，为系统的放大设计提供了实验依据。
The influence of various construction parameters on system resistance is studied in a model swirl board scrubber. It can be served as a fundation for a prototype scale design.
粮层阻力是粮食干燥、储粮机械通风等工艺设计中的关键参数。
Grain bulk resistance is a key parameter in the technological design of grain drying and mechanical ventilation for stored grains.
在结构、参数方面得出了一些降低底阀阻力系数的结论。
Some conclusion of reducing the resistance coefficient of bottom valve in respect to structure and parameters is presented.
隧道的流动阻力和风机在隧道内的升压力是隧道通风计算的基础，是进行通风计算首先要确定的参数。
The flow resistance of the tunnel and the boosting capacity of jet fan in the tunnel are the foundation to calculate the tunnel ventilation, they are the first ascertained parameters.
通过非线性优化算法，拟合实测的Q—S曲线，可得到桩土系统的工程力学参数，并由此计算得到桩身轴力及侧摩阻力分布曲线。
Measured Q-S curve are back figured by nonlinear optimization approach and model parameters are found simultaneously, then distribution of axial force and skin friction along pile are calculated.
利用阻力压降来检测两相流参数具有显著的优势。
It has obvious advantage to use resistance pressure drop to measure the parameter of two-phase flow.
车辆起动阻力是列车牵引计算、车站站坪坡度设计的基本参数和重要依据。
The starting resistance of a roller bearing wagon is an elementary parameter and an important basis for traction calculation and the gradient of station yard design.
病灶局部所测血流动力学参数为收缩期峰值血流速度PS V，舒张末期血流速度(EDV)及阻力指数ri。
The hemodynamic parameters measured in the lesion locations included peak systolic velocity (PSV), end diastolic velocity (EDV), and resistance index (RI).
利用遗传算法建立的船型参数优化方法，能够得到设计范围内的最优解，使设计的滑行艇阻力最小。
Genetic algorithms are used to optimize ship form parameters to get minimum resistance planing boat hull form.
此方法仅需一个材料参数例如材料硬度或抗拉强度等即可确定材料的裂纹扩展阻力曲线。
In this method, the crack resistance curve can be determined by using only one material data, either the hardness or the tensile strength.
方法：在不同负压条件下对空气过滤器的过滤效率和阻力、舱内环境指标和使用者生理参数进行测试。
Method the filter efficiency, pressure, capabilities of inner environment and physiological parameters of the user were tested in different negative pressure conditions.
该方法可以扩展应用至具有相似双体船型参数和不同水翼参数的水翼双体船的阻力预报。
This method can be used to predicate the resistance of the foil augmented catamaran with similar catamaran hull parameters and different hydrofoil parameters.
讨论分析了船型参数对SWATH兴波阻力的影响，提出了船舶设计过程中对船型参数的选择方法。
The effects of ship form parameters on wave resistance of SWATH are analyzed, and the select method of the parameters during ships design is presented.
对不同桩径及不同土体力学参数情况下的桩极限阻力进行了分析，研究了桩径及土体参数等因素对桩极限阻力的影响。
Piles with various diameters and soil parameters are adopted in analyses; and the influences of these factors on the ultimate resistance of anti-slide pile are investigated.
对不同桩径及不同土体力学参数情况下的桩极限阻力进行了分析，研究了桩径及土体参数等因素对桩极限阻力的影响。
Piles with various diameters and soil parameters are adopted in analyses; and the influences of these factors on the ultimate resistance of anti-slide pile are investigated.
应用推荐