采用激光熔覆技术在45钢表面获得镍基合金涂层。
The Ni based coating on 45 steel has been obtained by laser cladding technology.
研究耐高温镍基合金各向异性阻尼特性的建模与识别。
The modeling and identification of anisotropic damping property of Ni based single crystal alloys are presented.
研究了添加金刚石对镍基合金的强化与磨损性能的影响。
The effects of addition of diamond on reinforcement and wear resistance of nickel base alloy was studied.
研究了堆焊工艺和材料对镍基合金光束粉末堆焊质量的影响规律。
In this paper, the influence of surfacing technology and material on the quality of light beam Ni based alloy powder surfacing layer was investigated.
目前在我国应用最广泛且最为大众所接受的烤瓷合金是镍基合金。
Today, the most widely used and accepted also is nickel-ceramic alloy.
又分析了文献上四种耐热钢和五种镍基合金的蠕变及蠕变断裂数据。
Creep and rupture date of five types of Nimonic alloys and four types of heat-resistant steels obtained from the literature have been analyzed.
利用该模型已经对许多先进镍基合金的相变动力学进行了模拟研究。
Using this model, the simulation investigations have been made on the phase transition kinetics of many advanced nickel-based alloys.
研究了用真空熔烧法制得的镍基合金-碳化铬复合涂层的热疲劳行为。
Therma fatigue behaviors of Ni base alloy-chromium carbide composite coating made by a vacuum fusion sintering method are discussed in this paper.
研究了高温合金GH33表面激光熔铸镍基合金涂层的组织和耐磨性能。
The microstructure and wear resistance of Ni based alloy coating on the high temperature alloy GH33 by laser melt casting have been studied.
铌及铌硅化合物具有优良的力学性能，可替代现有的镍基合金超高温材料。
Niobium and niobium silicides due to their good mechanical properties, have high potential for being the high-temperature materials as a substitute for nickel alloys.
PWR燃料组件定位格架用材从镍基合金转变为锆-锡合金颇有经济意义。
The change of spacer grid material from Ni-base alloy to Zircaloy has economical value.
裂纹控制技术是镍基合金激光快速成形技术广泛应用和进一步工业化的关键。
Cracking control technology is one of the bottlenecks retarding the wide application and further industrialization of laser rapid forming nickel based alloys.
研究了镍基合金冷变形管坯退火裂纹与加热温度的关系和退火裂纹产生的原因。
The relationship between annealing cracks and heating temperatures of Ni-based alloy cold-formed billets and the causes of annealing crack occurrence are studied.
在适中的温度下，耐盐酸镍基合金C还具有耐硝酸、耐盐酸和耐硫酸腐蚀的特性。
Hastelloy C is also resistant to nitric, hydrochloric, and sulfuric acids at moderate temperatures.
Ag55%可以用于各种材料的钎焊，如：钢铁、纯铜、铜合金、镍和镍基合金。
Silver 55% is for use on any steels, copper and copper alloys, nickel and nickel alloys.
本文研究了稀土变质处理对改善铸造镍基合金的组织和耐蚀性能与铸造性能的影响。
The influence of rare earth modification on the improvement of structure and corrosion resistance of Ni-base alloy for casting as well as on its casting properties is studied in this, paper.
采用镍基合金粉，研究了激光多层涂覆过程中基材晶体取向对涂层凝固组织的影响规律。
The influence of the crystal orientation of the substrate on microstructure is investigated by multi layer laser cladding with the powder of nickel base superalloy.
这种镍基合金制备成涂层具有优良的抗热腐蚀性能，适于作为石油化工设备的防护材料。
NiCrMo coatings have superior function of resist hot corrosion, is suitable for use in the protection material of the petroleum and the chemical engineering equipments.
航空发动机重要零件如机匣、压气机风扇叶片等广泛采用钛、镍基合金等先进结构材料。
Advanced aeroengine alloys such as titanium and nickel-based alloys are widely used for casing and compressor blades.
本发明的工艺简单，借助纳米碳管的优异特性，制备出高性能的镍或镍基合金复合材料。
It has simple technique and prepares high-performance composite with the help of excellent properties of nano carbon tube.
采用送粉激光感应复合熔覆技术制备了镍基合金熔覆涂层，研究了涂层的组织和裂纹行为。
The nickel base alloy coatings were fabricated by powder feeding laser induction hybrid cladding. The microstructure and cracking behavior of coating were studied.
铬、钼、氮的含量水平是该耐蚀合金具有之前只有镍基合金才具有的抗酸和抗氧化氯的特性。
The levels of chromium, molybdenum and nitrogen all serve to provide the AL-6XN alloy with resistance to acidic, oxidizing chloride solutions previously achieved only by the nickel base alloys.
同时对晶须增韧陶瓷刀具在不同速度下切削航空镍基合金GH761时的切削温度进行了测量。
The temperatures of whisker ceramic tool JX-1 when machining air-nickel based alloy GH761 at a range of speeds were measured.
可以用于铸造的材料类型有：铝合金、青铜、工具钢、不锈钢、钨铬钴合金、镍基合金和贵金属。
Thee types of materials that can be cast are aluminum alloys, bronzes, tool steels, stainless steels, stellite, hastelloys, and precious metals.
通过进行蠕变曲线测定和组织形貌观察，研究了FGH95粉末镍基合金的微观组织结构与蠕变行为。
By means of the measurement of creep curves and microstructure observation, an investigation has been made into the microstructure and creep behaviors of FGH95 powder nickel-base superalloy.
该模型可以预测镍基合金薄壁筒在不同胀形工艺参数匹配下的回弹率，也可以用于优化胀形工艺参数。
The model can predict the bulging rebound rate of thin tube of nickel-based alloy at different process parameter, it can also be used to optimize the process parameters of bulging.
研究了铝热 -离心法制备的铁镍基合金内衬复合钢管的组织结构 ，分析了内衬层沿径向的成分分布。
The microstructure and composition distribution of the iron-nickel alloy lined layer in a composite steel pipe produced by centrifugal-SHS process were investigated.
简要地介绍了以镍基合金为粘结相的新型矿山凿岩硬质合金的制造工艺、制品性能以及使用效果考核情况。
Production technology, properties of products and application effects of a new type of cemented carbide with Ni-base binder for drilling tools are introduced briefly.
介绍了一种先进的共格沉淀动力学模型，以及运用计算机对镍基合金共格沉淀过程组织演化模拟取得的进展。
This paper introduces an advanced model of coherent precipitation kinetic as well as the development of computer simulation for the microstructure evolution of Ni-based alloys.
介绍了一种先进的共格沉淀动力学模型，以及运用计算机对镍基合金共格沉淀过程组织演化模拟取得的进展。
This paper introduces an advanced model of coherent precipitation kinetic as well as the development of computer simulation for the microstructure evolution of Ni-based alloys.
应用推荐