从事简单的滚、镀锌电镀生产。
电缆由数以千计电线组成，被高做的可拉长的钢，是抵抗腐蚀的镀锌电镀。
The cables are composed of thousands of wires, made of high-tensile steel, which are galvanized to resist corrosion.
在碘化钠灯照射下，电镀锌钢板的厚度明显增加。
The electrogalvanizing zinc plate were greatly increased under the irradiation of an iodinetungsten lamp.
尽管一般是通过液态锌蘸洗钢铁来镀锌，有时候也会用电解的方法，在电镀镍和铜时就通常使用电镀。
Though galvanisation is often done by dipping steel in liquid zinc, it is sometimes done by electrolysis—nickel and copper plating are normally done this way.
高速护栏表面防腐形式有电镀、热镀、喷塑、浸塑，镀锌后浸塑。高速护栏使用效果。
High speed rail surface corrosion in the form of electroplating, hot dip, spray, dip, dip galvanized. High speed rail use effect.
冷镀锌丝：是以低碳钢为芯线，通过拔丝、电镀锌工艺加工制成的金属复合材料。
Electro galvanized iron wire: Is take the low-carbon steel as the core, through the wire drawing, the electricity galvanization craft processing makes the metallic composite.
合成了一种新型氯化钠镀锌的主光亮剂。电镀实验结果表明，在较大的电流密度范围内有较好的电镀效果。
The new main brightener was synthesized. The electroplating experimental results showed it had a fine effect in the wider range of cureet density.
该文阐述了电镀锌生产线二级管理系统中主要功能模块。
This paper introduced the main function modules in the Level Two Control System of Strip Electroplating Line.
研究了稀土在硫酸盐体系电镀锌镍合金中的作用。
In this article, the effects of rare earth on Zn-Ni alloy electroplating from sulfate bath have been studied.
研究了添加剂在电镀锌镍合金中的作用。
The effect of additives on zinc-nickel alloy electroplating was studied.
本文叙述了化学沉淀法处理电镀锌镍合金废水所得到的污泥回槽利用问题。
This paper presented putting use of the wasted mud residue of plating Zn-Ni alloy to reclaiming bath by chemical deposition method.
研究了镀锌过程中镀锌工艺条件对电镀效果及镀锌石墨粉含锌量的影响。
The influences of electroplating parameters on the zinc content of zinc-plated graphite powders were analyzed in detail.
为了防止铅系合金阳极引发电镀锌钢板黑变，对不同成分及不同制造方法得到的阳极进行了电化学性能研究。
The electrochemical characteristics of lead based alloy anodes with different composition prepared by different way are researched for suppressing the black patina of galvanized steel sheets.
研究了硫酸盐-柠檬酸体系电镀锌-镍合金工艺。
A new process of zinc-nickel alloy plating in system of sulfate and citric acid was studied.
在发现铅是导致电镀锌钢板黑变发生的关键因素的基础上，对电镀锌钢板的黑变机理提出了锌铅共沉积假说和硫酸铅胶体膜假说；
On the basis of finding that lead is the vital factor to bring patina on galvanized steel sheets, two hypothesizes, colloid film of lead sulfate and the codeposition of zinc and lead, were employed.
利用循环伏安法等方法分析了水杨酸钠。电镀锌钢板上电聚合吡咯的作用。
The role of sodium salicylate in electropolymerization of pyrrole on zincated steel was studied by cyclic voltammetry.
简要介绍电镀锌铁合金后的直接磷化处理工艺；讨论工艺参数对磷化膜质量的影响。
This paper briefly introduced the phosphating treatment technology Zn - Fe alloy plating, and discuss the influence of technology parameters on quality of phosphatic coating.
而所谓电镀锌就是利用电解，在制件表面形成均匀、致密、结合良好的金属或合金沉积层的过程。
And the so-called electro galvanizing is the use of electrolysis, the formation of uniform, dense, combined with the process of metal or alloy deposit on the surface of workpiece is good.
报道了电镀锌-磷合金镀液的基液、 配体、表面活性剂和工艺条件的选择以及镀液性能的测量结果。推荐了电镀锌-磷合金的最佳工艺配方和条件。
The Paper deals with the selections of basic solution, complexant , surfactant and operating conditions of Zn-P plating. The optimum bath composition and operating conditions are recommended.
金螺丝属表层、和表面，如电镀锌金属表面的防腐层。
Metallic coatings, eg. Zinc electrical plating surface: Anti-Corrosion layer.
用AZ 91 D镁合金制样，研究了采用碱性镀锌工艺对高纯镁合金进行电镀的预处理工艺性能。
Taking magnesium alloy AZ91D as an investigation sample, the pretreatment process for electroplating of highly pure magnesium alloy is investigated by means of basic zinc plating processing.
其它特殊处理：油漆、电镀锌、热镀锌、喷塑。
Special finish: paint, electricity coat zinc, hot dipped galvanized, spry plastic.
种类：热镀锌铁丝、电镀锌铁丝、PVC涂塑锌铁丝。
Kinds: Hot Galvanized iron wire, Electroplate iron wire, PVC coated Galvanized iron wire.
我公司位于山东青岛市黄岛区，主营冷轧卷，热轧卷，热镀锌，电镀锌和不锈钢。
Our company located at the Shandong Qingdao Huangdao District, main business cold rolling volume, hot rolling volume, pot galvanize, electricity galvanization and stainless steel.
镀锌是应用最广泛的一个镀种，占总电镀量的60%以上。
Zinc is the most widely used a plating, accounted for more than 60% of the volume of electroplating.
主要从事各种电镀锌加工。
Mainly engaged in all kinds of electro-galvanized processing.
采用浸泡、电化学、模拟试验以及拉伸试验对冷轧厂电镀锌机组不锈钢紧固螺栓在现行工艺条件下遭受严重腐蚀进行了研究。
The severe corrosion of stainless steel fastening bolts on Electrolytic Galvanizing Line(EGL)in cold strip mill plant under current working conditions has been studied.
对航空高强钢低氢脆电镀锌-镍合金工艺进行研究。
The technology of low hydrogen embrittlement Zn-Ni alloy electroplating on aeronautic high strength steel was studied.
研制成功一种钾盐无援电镀锌-镍合金新工艺。
The property of the coating is identical with electroplating Zn-Ni alloy coating in ammoniate.
从而避免了传统电镀锌板直接焊接成型油箱内表面漏镀、焊缝及热影响区锌层烧损等缺陷。
It can also avoid pretermission of plating, burnout of zinc layer on weld beam and heat affected zone, and other limitations on the inner surface of fuel tank made of galvanized sheet.
应用推荐