铸件螺纹脱模是压铸模设计的难点之一。
The automatic screw thread unloading is a difficult point in the design of die casting die for castings with screw thread.
铸件螺纹脱模是压铸模设计的难点之一。
In the design of die casting die with screw thread, the automatic screw thread unloading is a difficult point.
精铸模设计是一项经验性强、过程繁琐的工作。
The design of precision casting mould is a strongly experiential and complex work.
具有冷冲模、冷冲级进模、注塑模及压铸模设计和制造能力。
We are specialized in stamping parts, plating and welding parts, and rubber parts, and we can design and produce stamping moulds, plastic injection moulds and casting moulds.
为了提高斜销抽芯式压铸模设计的质量和效率，对传统的设计过程进行了优化。
In order to improve the quality and efficiency on die casting die design with oblique pin drawing core, the traditional design process was optimized.
压铸模设计中，根据要压铸零件支架的参数性能要求，设计定模和动模两部分。
Die-casting in the mold design according to toeing die-casting the parameter function request of the spare parts support, design to settle the mold and move two parts of mold.
同时，从压铸机选择、工艺参数设置、浇注系统设计角度探讨了压铸模设计关键技术。
The key technologies for die casting die were approached from some aspects of selecting die casting machine, setting processing parameters, designing gating system.
近年来，模具CAE技术虽然已在注塑模、压铸模设计中得到应用，但仍存在不少问题。
Though mold CAE technology has already been used in injection mould and die casting mould design recently, there are still many problems.
传统的产品设计和压铸模设计及加工都是根据二维图完成，周期、成本、精度都会受影响。
Both traditional products design and die - casting die design and its manufacture are all done by two - dimension chart, which brings negative effects in time consuming, costs and precision.
提出了此类专家系统建模的三步曲，并将该方法应用于面向对象的压铸模设计专家系统中。
The three steps are proposed; and the establish mold method are applied into development of object oriented expert system for die casting mold design.
设计者可在本系统的引导下，按照压铸模设计的一般流程，方便地进行压铸模具的设计工作。
By using this system, the designer can accomplish the design duty conveniently and quickly according to the common design workflow of die casting mould.
通过对砂轮机托架压铸模设计方案的分析与改进，延长了模具使用寿命，说明了合理设计的重要性。
Over the analysis and improvement to the design project on die-casting die of grinding wheel machine tray, the die's working life is improved, which proves the importance of feasible design.
针对EA111油底壳铝合金压铸件的结构特点及工艺要求，介绍了一种切实可行的压铸模设计方案。
Aiming at the structure features and technological requirements for EA111 aluminum alloy oil tank, an available design plan for die casting die was described.
尺寸数据都来自于《模具设计与制造简明手册》，因此，本系统可以看作是一个数字化的压铸模具设计手册。
Because all dimension data comes from "simple handbook of die design and manufacture", the system can be regarded as a digitized design handbook about die-casting dies.
我们将使用磨、切割、焊接铸模、设计程式且推断出自己一套衡量产品设计的方法。
We will mill, cut, mold solder, program, and draw our way to evaluating product design.
在分析端盖零件压铸工艺的基础上，论述了压铸模的设计要点。
Based on analyzing die casting process of cover part, the authors discuss the main points of the design of die casting mould.
这些方法已在注塑模和压铸模的设计制造中得到部分应用，取得了很好的效果。
The approach presented in this paper has been partly applied in certain cast and plastic injection mould manufacturing company, and the effect is fairly good.
分析了录音机芯飞轮压铸模的原设计失败的原因，重新设计了用于冷室压铸机的中心浇口、浮动分流的压铸模。
A new die-casting die fit on cold chamber die casting machine was redesigned in the part of the center gate and floating flow-distribution.
有压铸模具设计经验者优先。
分析了铝合金端盖压铸件结构工艺性特点，介绍了压铸模的浇注系统及模具结构设计。
The structural characteristics of aluminum alloy cover was analyzed, and the design of pouring system and die-casting die structure were introduced.
涡轮叶片是飞机发动机的核心部件之一，其内部结构日趋复杂，这给涡轮叶片精铸模具的分模设计带来了很大的困难。
As one of the core parts of aeronautic engine, turbine blade has increasingly complicated inner structure, which exceedingly obstacles the parting design of precise casting mould of turbine blade.
通过上述方法可提高压铸模的设计效率，缩短设计周期。
By above methods, the design efficiency is increased and the design periods is shortened.
分析了铝合金水龙头零件的结构工艺性特点，介绍了压铸模的浇注系统及模具结构设计。
The structural characteristics of the aluminum alloy tap part were analyzed, and the design of pouring system and die-casting die structure were introduced.
该方法不仅适用于锻模，也适用于塑料模和压铸模等其它型腔模打模电极齿形设计。
This basic method are suitable not only for forging die, but also for design of tooth form of electrode machining of other molding die, such as plastic die, die for die casting mold etc.
为满足航空发动机涡轮叶片精铸模具设计、制造、叶片铸件检测流程对信息集成的需求，提出构建精铸模具集成设计系统平台。
An integration system is set up to meet the need for information integration in the process of mold design and manufacture and detection of aero-engine turbo blade by investment casting.
分型面设计直接影响精铸模具结构设计与模具加工复杂程度，是一项典型的强经验、弱理论的工作。
The parting surface designing of investment casting mould to turbine blade is a difficult job which needs more experience and influence the configuration of its mould and process.
提出了一种简单高效的涡轮叶片精铸模具型面逆向设计方法：特征参数逆向调整法。
A simple and efficient reversing methodology of adjusting featured parameters is proposed for the casting-die profile design of turbine blades.
详细介绍了从压铸产品设计到压铸模制造全过程中应注意的问题。
The problems required attention during the whole process from die-casting products design to die-casting die manufacture are introduced in detail.
笔者设计了一种使用简单、结构可靠的挡块浇铸模具，并对其组成和使用方法做了介绍。
Designs a kind of casting die of conformal blocks, which is used simply with reliable structure.
笔者设计了一种使用简单、结构可靠的挡块浇铸模具，并对其组成和使用方法做了介绍。
Designs a kind of casting die of conformal blocks, which is used simply with reliable structure.
应用推荐