将多孔钴铬钼合金材料用于人工活性骨的骨架材料。
The porous Co-Cr-Mo alloy material are used as got-up active bones.
目的研究一种能同时用于烤瓷修复和可摘局部义齿铸造支架的新型钴铬钼合金。
Objective to investigate a kind of Co-Cr-Mo alloys used for both porcelain fused to metal (PFM) restorations and casting framework of removable partial dentures.
采用人工合成高纯度的羟基磷灰石粉末，喷涂在具有注册证的钛合金和钴铬钼合金人工关节上。
Artificial hydroxyl apatite powder with high purity is applied onto the surface of the registered artificial joints made of titanium and cobalt alloy.
合金钢的性质取决于其所含有的除碳以外的一种或多种元素，如镍、铬、锰、钼、钨、硅、钒和铜。
Alloy steel owe their properties to the presence of one or more elements other than carbon, namely nickel, chromium, manganese, molybdenum, tungsten, silicon, vanadium, and copper.
合金钢：指钢中含有铁，碳，以及镍、铬、钼等一种或多种其他的合金元素。
ALLOY steel: a steel containing iron and carbide plus one or more other metals such as nickel, chromium, or molybdenum.
新型模具钢材料SKD61钢是一种含硅、铬、钼和钒的中合金热作模具钢。
The new-style of SKD61 steel is a medium alloy hot-mold steel.
在粗轧阶段选用了合金半钢材料轧辊，在精轧阶段选用了铬钼无限冷硬铸铁材料的轧辊。
In the process of rough rolling, the alloy semisteel was chosen, and the unlimited chrome and molybdenum chilled iron roll material was used in the process of fine rolling.
介绍了应用DV - 4光电光谱仪，仅用一种测定条件，测定高合金钢中碳、硫、磷、锰、硅、铬、镍、钼、钒、钨、钛、铌、铝元素的含量的方法。
The method of measuring c, s, p, Mn, Si, Cr, Ni, Mo, V, W, ti, Nb, Al element content by DV-4 photoelectric spectroscope on one condition is introduced.
高铬钼抗磨合金本质为亚共晶型高合金白口铸铁。
High chromium-Molybdonum wear-resistant alloys are hypoeutectic white cast iron.
哈氏合金是一种高镍高钼合金，在硝酸铬酸、硫酸等氧化性酸中具有良好的耐腐蚀性。
Ahab's alloy is a high ni high molybdenum alloys, in nitric acid chromic acid, sulfuric acid etc oxidizing acids has good corrosion resistance.
本文选用人牙龈细胞，对牙科常用的钴-铬-钼铸造合金进行细胞毒性的研究。
The cytotoxicity of Co-Cr-Mo dental casting alloy has been studied by using gingiva cells.
组成合金的元素有钼、钨、铬、硼和碳。
The alloying elements are molybdenum, tungsten, chromium, boron, and carbon.
目的：测试激光焊接铁铬钼软磁合金与钴铬合金的机械性能，为临床应用提供参考。
Objective: to explore the mechanical properties of laser welds of Fe-Cr-Mo magnetizable alloy and cobalt-chromium alloy so as to give reference for clinical work.
铬、钼、氮的含量水平是该耐蚀合金具有之前只有镍基合金才具有的抗酸和抗氧化氯的特性。
The levels of chromium, molybdenum and nitrogen all serve to provide the AL-6XN alloy with resistance to acidic, oxidizing chloride solutions previously achieved only by the nickel base alloys.
提出用稀土铬锰硅合金代替昂贵的稀土钼铁合金生产高性能的柴油机缸体。
It is proposed rare earth chrome-manganese-silicon alloy can replace the costly rare earth ferro-molybdenum alloy to produce diesel engine cylinder with high property.
高性能电热丝，这种高寿命的合金线是由镍、铬、钴、钼和钛组成，长度可伸长，能够加快切割速度和有很长的寿命。
High-performance electric wire, this high life of nickel alloy wire is, chromium, cobalt, molybdenum and titanium composition, length can elongation, cutting speed up to speed up and have a long life.
以硼、铬取代镍、钼合金还可使磨辊的生产成本有所降低。
Also, the use of boron and chromium, instead of nickel and molybdenum, can lower the cost of roller.
为改善45钢制件表面耐腐蚀性，采用CO2激光在45钢表面合金化铬钼硼以获得高耐蚀性的合金复合涂层。
To improve the corrosion resistance of 45 steel pieces, Chromium, molybdenum and boron were alloyed on 45 steel by CO2 laser to obtain excellent corrosion resistance composite coating.
螺栓是其后的热处理淬火都是用中碳钢(0.35至0.50%丙)，合金钢为如铬，锰元素的淬透性，和钼。
Bolts that are to be hardened by subsequent heat treatment are made from medium-carbon steel (0.35 to 0.50% c), alloyed for hardenability with elements such as chromium, manganese, and molybdenum.
螺栓是其后的热处理淬火都是用中碳钢(0.35至0.50%丙)，合金钢为如铬，锰元素的淬透性，和钼。
Bolts that are to be hardened by subsequent heat treatment are made from medium-carbon steel (0.35 to 0.50% c), alloyed for hardenability with elements such as chromium, manganese, and molybdenum.
应用推荐