目的探讨铜冶炼工人血铅与职业性暴露关系。
Ojbective To probe the relationship between the serum lead of the copper smeltery workers and the occupational exposure.
改建的肯布拉港铜冶炼厂2000年投入运行。
The Port Kembla Copper (PKC) copper smelting facilities were commissioned during 2000.
分析了铜冶炼so2烟气流程中风机调速的特点。
The specialities of fan speed-regulation system for SO2 smoke in copper smelt process are analyzed.
在不远的将来,硫的捕集是铜冶炼厂的主要目标和挑战之一。
Sulfur capture is one of the major objectives and challenges for copper plants for near future.
某厂铜冶炼系统ATLS高速离心鼓风机,噪声大,频率高。
The noise control of ATLS large centrifugal blower in smelter is introduced in this paper. the noise has high power, high frequency.
铜冶炼的转炉渣是重要的二次金属资源,基本采用浮选法回收。
The converter slag from copper smelting is important secondary metal resources, which are mainly recovered by the flotation.
地震破坏了道路和桥梁,导致几座铜矿和几家铜冶炼厂至少暂时关闭。
The temblor twisted roads and bridges, while shutting several copper mines and refineries, at least temporarily.
介绍铜冶炼烟气制酸装置废水处理系统石膏离心机控制系统的改造。
The retrofitting of control system for gypsum centrifuge in swage treatment system of a copper smelter acid plant is described.
由于铜冶炼烟气波动较大,给硫酸生产过程的控制造成一定的难度。
YunNan copper sulfuric acid branch factory USES copper metallurgical off-gas to produce sulfuric acid.
江西铜业公司贵溪冶炼厂是中国第一座采用闪速熔炼技术的铜冶炼工厂。
Guixi Smelter of Jiangxi copper Company is a first copper smelting plant to adopt the flash smelting technology in China.
指出旋涡炉顶吹炼铜法应作为葫芦岛锌厂粗铜冶炼技改项目的首选工艺。
The Contop Process become first one for Copper Smetling innovation at Huludao zine smelter.
介绍陶瓷过滤机在铜冶炼烟气制酸装置污水处理系统中的试验、选型及应用。
Test, selection and application of porcelain filter in the swage treatment system of a copper smelter acid plant are described.
介绍低压脉冲袋式收尘器替代传统扁袋除尘器技术在有色金属铜冶炼过程中的应用。
The paper introduces the application of the low pressurepules bag filter to the process of copper smelting.
考古专业的学生们正在检查克巴特·恩-纳哈斯遗址,这里是位于死海以南的一处古老铜冶炼中心。
Archaeology students examine Khirbat en Nahas, an ancient copper-smelting center south of the Dead Sea.
本文介绍铜冶炼鼓风炉生产过程的自动控制要求以及小型集散控制系统在该过程的应用情况。
This article presents the requirement of automatic control for the production process of a copper smelting furnace and the application of DCS to process.
介绍在铜冶炼厂由PLC和上位机组成的两级精矿自动计量和取样计算机控制系统的设计和应用情况。
Design and application of two level computer control system that consists of PLC and process computer for concentrate measuring and sampling in copper melting plant are described.
介绍了祥光铜业“双闪”(闪速熔炼和闪速吹炼)铜冶炼工艺技术、主要设备、生产实践及存在问题与对策。
The "Double-Flash"(Flash Smelting and Flash Converting) copper smelting technique, main equipments, production practice and existing problems and problem solutions of Xiangguang Copper are introduced.
目前,国内七大铜冶炼企业正在紧密磋商,以便就2012年精铜冶炼加工费问题与国际相关矿企展开谈判。
At present, the domestic seven big copper smelting enterprises are close consultation, so that the 2012 pure copper smelting processing problems and international related ore enterprises negotiations.
本文结合余热锅炉的生产实践,浅析铜冶炼余热锅炉的腐蚀机理,简要探讨锅炉设计和运行中应采取的相应措施。
The paper analyzes the corrosion reason of the waste heat boiler in smelting copper, discusses the corresponding measure during boiler design and operation.
介绍江铜贵冶年产30万t铜冶炼项目引进卡尔多炉处理废杂铜冶炼工艺的情况及相关设备的技术,并介绍了卡尔多炉这种炉型处理的废杂铜的优缺点。
This articles introduces the process of using Kaldo furnace to treat copper scrap adopted by Guixi Smelter's new 300,000 ton expansion project, as well as the equipment technology.
它也取消了所有的铜进口税,希望金属成品进口的提高能够取代一些国内冶炼。
It also abolished all duty on imports of copper, in the hope that higher imports of finished metal might displace some domestic smelting.
你们这个冶炼厂一天能够熔冶出多少铜来?
冶炼商和精炼商将干原料(即铜精矿)加工为阳极铜、以及最终加工为阴极铜收取的费用也令人意外地出现了下降。
There has also been a surprise drop in the fees charged by smelters and refiners to process dry feedstock, or copper concentrate as it is known, into anodes and eventually cathodes.
本文概述了江西铜业公司贵溪冶炼厂熔炼车间信息管理系统的模块设计和功能实现等特点。
This article summarizes the modular design and functional realization of information management in Smelting Plant of Guixi Smelter.
这将需要采取协调一致的部落努力,矿山,冶炼,铸造铜斧头。
It would have required a concerted group tribal effort to mine, smelt and cast the copper axe head.
契丹民族开采的矿种有银、铜、铅和铁等,冶炼和制造技术发达,他们主要制造生产工具和生活用具。
They exploited many minerals, such as silver, copper, lead and iron and the smelting and the manufacturing techniques were advanced. They mainly made productive tools and life utensils.
并全面概括和介绍了铜、锡、铅、锌重有色金属冶炼过程中砷的分布和脱除情况。
The distribution and removal of Arsenic in heavy non-ferrous smelting such as copper, tin, lead and zinc are summarized.
并全面概括和介绍了铜、锡、铅、锌重有色金属冶炼过程中砷的分布和脱除情况。
The distribution and removal of Arsenic in heavy non-ferrous smelting such as copper, tin, lead and zinc are summarized.
应用推荐