用金属有机物分解法制备了钛酸铅薄膜。
The lead titanate thin film has been prepared by the metal-organic decomposition(MOD)method.
普通的陶瓷元件分别是钛酸钡和锆钛酸铅。
Common ceramic elements are barium titanate and lead zirconate - titanate.
普通的陶瓷元件分别是钛酸钡和锆钛酸铅。
Common ceramic elements are barium titanate and lead zirconate-titanate.
为钛酸铅系功能陶瓷及材料的研究指明了方向。
It points out the research direction of the functional materials of lead-based titanate ceramics.
制备方法：一、在基底上沉积钛酸铅镧钙系铁电薄膜；
The preparation method comprises the following steps: 1. lanthanum and calcium modified lead titanate ferroelectric thin film is precipitated on a substrate;
此分析方法和结论可用于锆钛酸铅悬臂梁结构的优化设计。
Above-mentioned methods and conclusion can be used for optimized design of PZT cantilever structure.
在凝胶玻璃中成功地原位生长出均匀精细的锆钛酸铅微晶。
Uniform and fine lead zirconate-titanate crystallites were grown in-situ in gel-glasses successfully.
研究了基于流延技术制备硅基锆钛酸铅(PZT)厚膜的工艺。
A silicon based lead zirconate titanate (PZT) thick film technology by tape casting is studied in this paper.
溶胶-凝胶法制备钛酸铅陶瓷纤维的好坏直接取决于溶胶的质量。
Wether the quality of lead titanate ceramic fibers which were fabricated the sol-gel method was good or bad would be directly linked to the sol quality.
研究发现掺杂钛酸铅纳米晶的晶胞参数均发生了不同程度的改变。
Morever, phase composition and cell parameters was also studied by XRD analysis. The results showed that cell parameters would change for doping.
探讨了钛酸铅溶胶的稳定因素，如原料、溶剂、添加剂的选取。
The influence factors, such as raw materials, solvents and additives on the stability of lead titanate sol are discussed.
对硅基锆钛酸铅(PZT)压电薄膜微传感器进行了结构和版图设计。
The structural and territorial design of PZT thin film micro-sensors is processed.
薄膜具有明显的渗流效应，介电常数可以达到纯钛酸铅薄膜的3 ~5倍。
The film has an obvious seep effect and the dielectric coefficient may achieve 3-5 times to the pure lead titanate film.
用磁控射频溅射方法在不加热的硅衬底上沉积生长锆钛酸铅镧（PLZT）薄膜。
Thin films of lead lanthanum zirconate titanate (PLZT) were deposited by rf magnetron sputtering from oxide targets onto unheated Si substrates.
钛酸铅系材料具有优异的压电、铁电和热释电性能，是智能材料系统中的主导材料。
Lead titanate series materials present excellent piezoelectricity, ferroelectricity and pyroelectric performance, and have been widely used in intelligent material system.
首次报道了溶胶-凝胶法制备钛酸铅基铁电陶瓷的晶粒尺寸对其高频介电性能的影响。
The effect of grain size on high frequency dielectric properties of PbTiO_3 based ceramics prepared by sol-gel process was studied.
以丁醇钛、乙醇锆、醋酸铅为原料，采用溶胶-凝胶新工艺，成功地制备出锆钛酸铅陶瓷材料。
Lead Zirconate Titanate ceramic material has been prepared by sol-gel method with Titanium butoxide, Zirconium alkoxide and anhydrous lead acetate.
以硫铝酸盐水泥为基体，以铌锂锆钛酸铅为功能体，用压制成型法制备了水泥基压电复合材料。
Sulphoaluminate cement as matrix and niobium lithium zirconate titanate as functional part were used to fabricate cement-based piezoelectric composites by compressing technique.
进而根据界面能对相变温度的影响，对钛酸铅薄膜的相变温度随薄膜厚度的变化规律进行了解释。
The mechanism of phase transition temperature of film changing with film thickness is explained by the influence of Gibbs free energy on phase transition.
新型弛豫铁电单晶铌镁酸铅—钛酸铅(PMNT)在准同型相界(MPB)附近具有非常优异的压电性能。
Novel relaxor ferroelectric single crystal lead magnesium niobate-lead titanate (PMNT) has been found to exhibit excellent piezoelectric properties near the morphotropic phase boundary (MPB).
同时又测量了同一薄膜内不同层上钛酸铅的相变温度，结果是从衬底向薄膜表面方向，相变温度逐渐降低。
The phase transition temperatures of films at different layers are different, gradually decreasing from the back layer to the surface layer.
应用高能量单脉冲激光作用在锆钛酸铅(PZT)压电薄膜上，研究脉冲激光的热冲击对PZT薄膜性能产生的影响。
The high energy pulse laser was used to radiate lead zirconate titanate (PZT) piezoelectric films. The effect of the laser thermal shock on the properties of the films was investigated.
采用电滞回线方法和偏置直流电场中叠加小交变电场方法研究了锆钛酸铅反铁电陶瓷材料在强电场作用下的介电行为。
The dielectric behaviour of antiferroelectric lead zirconate titanate has been studied by measuring the polarization and capacitance changes with the electric field.
提出并实验验证了一种新的基于掺镧锆钛酸铅(PLZT)材料的电光陶瓷偏转器的腔内光束扫描外腔半导体激光器。
A novel beam-steering external cavity diode laser using an intracavity lead lanthanum zirconate titanate (PLZT) electro-optic ceramic deflector is proposed and demonstrated experimentally.
锆钛酸铅薄膜是一种新颖的功能材料，它具有优良的电性能而引起国内外学者的广泛关注，成为国际上器件研究的新热点。
Lead zirconate titanate is considered to be one of the novel functional materials. It has received great interest and been widely studied because of its excellent electrical performance.
以不同浓度的聚乙烯醇(pva)和聚丙烯酸(PAA)作为添加剂，利用水热合成法成功制备出具有不同直径的钛酸铅纳米棒。
Lead titanate nanorods with different length and diameter ratios have been successfully fabricated via hydrothermal method, PVA and PAA with different concentrations assisted as additives.
在不同湿度（2%、30%、98%）的空气中，研究了极化的锆钛酸铅（PZT-5）铁电陶瓷压痕裂纹在残余应力、电场作用下的滞后扩展。
The propagation process of indentation crack in air of different relative humidity(2%, 30%, 98%) for a poled PZT-5 ferroelectric ceramic was investigated.
利用双辊制备了一系列热塑性弹性体聚氨酯（PU ）和铁电钛酸锆酸铅盐（PZT）的电致感应PZT/PU复合物。
Electrostrictive composites of thermoplastic elastomer polyurethane (PU) and the ferroelectric lead zirconate titanate (PZT) with various volume fractions were prepared by hot roller miller.
钙钛矿结构铌镁酸铅(PMN)是弛豫铁电体的典型代表。
Perovskite type lead magnesium niobate (PMN) is a relaxor ferroelectric.
钛酸锶钡铁电薄膜材料具有电热效应，同时又不含有铅类有害物质，可用于铁电致冷，比含铅的铁电材料更具有环保意义。
Because BST materials weren't added with Pb and had the electrocaloric effect, the reseatch on BST thin films applied ferroelectric refrigeration was more meaningful to protect the entironment.
应用推荐