采用原位聚合法，分别使用脲醛树脂和蜜胺树脂两种囊壁材料对生物农药-阿维菌素进行了微胶囊包覆。
The abamectin microcapsules were prepared by in-situ polymerization process in this work, with melamine-formaldehyde resin and urea-formaldehyde resin as wall materials respectively.
采用铬酸氧化法及吡咯气相沉积聚合法处理UHMWPE纤维。
UHMWPE fibers were treated by chromic acid oxidation and pyrrole vapor deposition respectively.
以4 -叔丁基苯乙烯为单体，采用自由基悬浮聚合法合成了颗粒状高吸油树脂。
Granular high oil-absorbing resin was prepared by free radical suspension polymerization process using 4-tert-butyl styrene as monomer.
采用反相悬浮聚合法合成了聚丙烯酸高吸水性树脂。
A high water absorption polyacrylic acid resin was obtained using inverse suspension polymerization.
以乙腈为分散剂，采用沉淀聚合法合成了反乌头酸分子印迹聚合物微球。
Microspheric trans aconitic acid imprinted polymers were synthesized via a precipitation polymerization with acetonitrile as dispersion solvent.
本文采用原位聚合法以十二醇为芯材，以三聚氰胺-甲醛树脂为壁材，制备微胶囊相变材料并对其进行性能表征。
The microencapsulated phase change materials were prepared with in situ polymerization using dodecanol as the core, melamine-formaldehyde resin as the shell.
进而采用磁流体存在下的分散聚合法制得了磁性聚合物微球。
Then the magnetic polymer microspheres were prepared by the dispersion polymerization with ferrofluid.
以氨基安替比林为模板分子，采用原位聚合法制备了具有特定识别性能的棒状分子烙印聚合物。
The recognition of the molecularly imprinted polymer rod was evaluated by comparing the retention values of aminoantipyrine and its analogues.
采用反相悬浮聚合法合成聚丙烯酸钠高吸水性树脂。
Inverse suspension polymerization was adopted to synthesize sodium polyacrylate super hydroscopicity resin.
以丙烯酸酯为单体，二乙烯基苯为交联剂，采用悬浮聚合法合成低交联度的聚丙烯酸酯类吸油树脂。
The acrylate oil absorbing resin were synthesised by means of suspension polymerization and using divinylbenzene as crosslinking agent.
采用原位聚合法用三聚氰胺-甲醛树脂包覆正十八烷，制备出相变微胶囊。
Phase change microcapsule was prepared by melamine-formaldehyde resin and n-octadecane through in-situ polymerization.
采用水溶液聚合法合成了淀粉接枝丙烯酰胺聚合物，研究了聚合反应动力学和聚合反应机理。
One starch graft acrylamide copolymer was synthesized by graft copolymerization of starch and acrylamide in solution, and the polymerization kinetics and its mechanism was discussed.
实验中采用界面聚合法制备聚酰胺多孔微囊，然后利用等离子体接枝填孔聚合法将PNIPAM接枝在微囊壁的膜孔中。
Interfacial polymerization was introduced to prepare polyamide porous microcapsules, and plasma-graft pore-filling polymerization was used to graft PNIPAM into the pore of the microcapsule membranes.
采用溶液聚合法制备高性能丙烯酸树脂，以“饥饿态”进料法聚合可缩短反应时间，提高单体转化率。
The experimental results showed that using the so-called starved feeding mode was able to shorten the reaction time and raise the conversion ratio of monomers.
采用自由基溶液聚合法合成了阳离子环氧丙烯酸树脂。
The title cationic epoxy acrylic resin was synthesized with the method of free-radical solution polymerization.
采用原位聚合法，分别使用脲醛树脂和蜜胺树脂两种囊壁材料对生物农药-阿维菌素进行了微胶囊包覆。
The photochromic microcapsules were prepared by in-situ polymerization, using melamine-formaldehyde resin as wall materials and photochromic materials as core materials.
采用液态原位聚合法制备了碳纤维(CF)增强浇铸尼龙(MC尼龙)复合材料，研究了其吸湿行为。
Monomer casting nylon (MC nylon) composites reinforced by carbon fibers (CF) are prepared by liquid insitu polymerization, and their moisture absorption behaviors are studied.
探讨在采用瞬时聚合法直接合成固体丙烯酸酯浆料的过程中，疏水性单体丙烯酸丁酯用量对所生成丙烯酸酯浆料性能的影响。
Effect of hydrophobic monomer butyl acrylate amount on acrylate size mixture property in the process of compounding solid acrylate size mixture directly by instant polymerization was discussed.
采用乳液聚合法制备了聚苯乙烯(PS)微球，对制备条件进行了研究。
In this paper, polystyrene microspheres were synthesized by emulsion polymerization method. The preparation conditions of PS microspheres were discussed.
采用乳液聚合法合成自交联型丙烯酸酯类印花粘合剂。
The self-crosslinking acrylate printing adhesive was synthesized by emulsion polymerization.
采用间接开环聚合法合成了平均分子量为444 ，848的聚乳酸，并对合成工艺作了优化。
The of polylactic acid(PLA) was obtained by ring-opening polymerization and the synthesis conditions to get 444,848 molecular weight were optimized.
采用催化聚合法合成了低游离TDI聚氨酯固化剂。
A low free TDI polyurethane crosslinker, through catalyst polymerization technology, has been prepared.
采用三聚氰胺甲醛树脂（MF）作为囊壁，用原位聚合法对生物农药鱼藤酮进行包囊，制备微胶囊制剂。
The preparation of microcapsules of bio-pesticide rotenone by means of in-situ polymerization, with melamine formaldehyde resin(MF) as the shell material, is discussed in this paper.
方法：采用无皂乳液聚合法合成三元共聚荧光微球。
METHODS: the ternary fluorescent copolymer microspheres were synthesized by means of emulsifier-free emulsion polymerization.
以丙烯腈为单体，二乙烯苯为交联剂，采用原位聚合法制备出了强极性的有机高聚物多孔层开管柱- OPPLOT - A型柱。
A new type of strongly polar organic polymer porous layer open tubular column (OPPLOT-A) was prepared by in situ copolymerization of acrylonitrile and divinylbenzene.
采用无皂乳液聚合法制备了具有单分散性的微米级聚苯乙烯微球。
The monodisperse micron-size polystyrene particles were prepared by emulsifier-free emulsion polymerization.
采用原位吸附聚合法使苯胺聚合于纸浆纤维的微孔壁中制备了导电纸。
In this paper, aniline was polymerized into the micro-pore wall of the pulp fiber by in-situ adsorption polymerization process in order to manufacture conductive paper.
采用悬浮聚合法合成了木浆纤维素交联聚合复合高吸油性材料，测定了所制备的复合高吸油性材料吸油性能指标。
The high oil-absorbing resin made of crosslinked copolymer of wood fibre and cetyl methacrylate was prepared by suspension polymerization method.
采用本体聚合方法将丙烯酸酯单体的混合物实施热聚合制备预聚体，采用核-壳聚合法的单体投料方式同时加入链转移剂十二烷基硫酵来控制反应进程。
UV curing polyacrylate pressure sensitive adhesive was synthesized by core-shell polymerization, at the same time, chain transfer agent NDM was added for controlled reaction rate.
采用本体聚合方法将丙烯酸酯单体的混合物实施热聚合制备预聚体，采用核-壳聚合法的单体投料方式同时加入链转移剂十二烷基硫酵来控制反应进程。
UV curing polyacrylate pressure sensitive adhesive was synthesized by core-shell polymerization, at the same time, chain transfer agent NDM was added for controlled reaction rate.
应用推荐