文章采用模块化设计思想，研制了自动变速器试验数据采集系统。
The article uses the modulation design concept, has developed the automatic transmission tentative data gathering system.
采用模块化设计思想，针对每个模块各自的特点，选择合适的元器件，做了大量实验。
With the modular design ideal, we choose the right components and did a large number of experiments.
节点的硬件电路采用模块化设计思想，可以减少设计的复杂度，减小无线电路的干扰。
The idea of modularized design in hardware circuit of nodes can reduce the complexity of the design and reduce the interference of wireless circuit.
该组态软件分为PC机软件和单片机软件两个部分，这两个部分都采用模块化设计思想。
The configuration software is divided into PC software and Single Chip Micyoco software. The modularization design idea is adopted in this paper.
采用模块化设计思想，在CD MA无线通信模块上实现了SSL协议，保证了数据在无线网络中的安全传输。
By adopting the thought of module design, this paper implements the SSL protocol on the CDMA wireless communication module, and resolves the security of the data transmission in the wireless channel.
该ECS采用模块化设计思想，利用CAN总线进行数据信息的实时通讯，以实现电子调速和系统监控等功能。
This ECS employs modular design, and achieves real-time communication of data with CAN bus, and thus is able to control the speed of engine and monitor the system.
水下武器系统综合检测系统采用模块化设计思想，由信号发生器模块、A/D模块、D/A模块、实时时钟模块、液晶及打印机模块等组成。
The synthesized test system for underwater weapon system adopts a modularized structure with signal generator, A/D converter, D/A converter, real-time clock, printer and LCD screen.
在软件设计中采用了自顶向下的设计思想，所有程序采用分层次模块化设计，提高了软件的可移植性。
The software design, using in the top-down design ideas, all the procedures used hierarchical modular design, improving the portability of the software.
由于采用了模块化设计思想，该平台有很大的灵活性，并能作为一个通用开发平台，方便地应用于其他项目。
With modular design, the platform is quite flexible and could be applied as a universal development platform and applied with ease to other projects.
网络仪表设计采用模块化思想。
基于嵌入式系统的微机自动准同期装置，采用模块化和开放性设计思想。
The auto quasi corresponding-period equipment based on an embedded system, which used modular and open design ideas.
软件逻辑上是四层框架结构，采用了模块化的设计思想；
The software is a four-layered frame structure in logic, and adopts the designing thought of modularization.
同时，为了增加系统的稳定性和可维护性，采用了模块化的设计思想。
At the same time, in order to increase the system stability and maintainability, we introduce the thought of modularization.
基于分级控制和模块化设计思想，设计了一种适用于三肢体仿生机器人控制的，采用PC机、TMS320 LF 2407和MSC1210的控制系统。
Based on the ideas of hierarchical control and modularization design, this paper designs the control system of the three limb bionic robot, which consists of PC, TMS320LF2407 and MSC1210.
单片机软件采用了模块化设计思想。
The idea of modularization design is adopted in the single chip microcomputer software.
本文采用模块化、开放式系统设计思想，从整体上设计了一个具有物理与数字仿真相结合的适合于教学培训、科研实验的变电站综合自动化仿真系统的实现方案。
This dissertation applying the thought of modularization and opening system, a integrated physical and digital simulation system that suits for teaching and training and experiment is designed.
解决这一矛盾的关键是在产品设计中采用绿色模块化设计思想。
The key to solve the contradiction is to use green modular design in products design.
本视景软件采用模块化编程，因而具有很好的移植性，其设计思想可以被其它视景系统开发所借鉴，具有很高的实用性。
The design idea of the system is of high practicality, so it can be used asreferenee by other scene view systems.
主控程序采用模块化的设计思想，程序经过调试，达到了预期的控制效果。
The thesis designs the program using modular designing idea. After debugging the program, finally, this thesis achieves the expected control effect.
在硬件和软件设计上，采用模块化设计的思想。
On the design of the hardware and software, modularization technique is adopted.
在开发过程中根据软件工程原则，采用模块化的设计思想和自顶向下的开发策略。
According to the software engineering principle, this system adopted modular design ideals and top-down development tactics.
软件设计方案采用模块化的设计思想，给出了主程序的流程图及数据处理的相关说明。
On the software design, modularized program has been used, the procedure flow chart is introduced, and explanation on digital processing is given.
在软件设计时充分采用了模块化思想，使系统便于维护、移植和功能扩展。
It is convenient to maintenance, migration and add new functionality as a result of being designed to Modules.
系统在硬件和软件方面均采用模块化的设计思想，既方便系统调试和用户使用，又为系统的改进和完善提供了便利，给以后的设计开发奠定了基础。
Modular designing ideas in hardware and software are not only convenient to debugging and using, but also improve and perfect the system. It offers the foundation for the future designing.
设计时采用模块化、层次化、开放式的思想，便于今后数控系统的维护、扩展和升级。
Modular design, level of openness of the thinking for the future of the nc system maintenance, expansion and upgrades.
系统的设计和实现过程中，采用了模块化的思想，具有良好的开放性，有利于功能扩展和系统升级。
Because we have used modules method in course of system design and implement, the system has opening structure and easy to update and extend.
为了实现电能数据的自动抄报，运用系统化、模块化设计思想，应用先进的计算机技术、无线通信技术和现代电子技术，采用分层、分布、分散式结构，设计了远程电能自动抄表控制系统。
In order to realize the electrical meter reading automatically, a automatic meter reading and controlling system is designed based on the computer, wireless communication and electronic technologies.
本设计采用模块化的设计思想，整个仪表分成传感器、核心板、扩展板和液晶及按键四个模块。
Based on modular design, the meter is divided into 4 modules: sensors module, main-board module, LCD and key-board module, mini-board.
本设计采用模块化的设计思想，整个仪表分成传感器、核心板、扩展板和液晶及按键四个模块。
Based on modular design, the meter is divided into 4 modules: sensors module, main-board module, LCD and key-board module, mini-board.
应用推荐