文中分析了开挖问题采用平面模型计算时，应对开挖初应力进行修正，并给出了算法。
In the paper it points out that when the plane model is used to compute the excavation problem, the initial stress of excavation must be modified, and the algorithmic model is shown in the paper.
实验研究表明，将筒体视为刚体的建模假设和采用平面模型研究滚筒洗衣机悬挂系统的振动性能是可行的。
Experiment study indicates that the modeling assumption of the tub as a rigid body, with applying the planar model into investigating the suspension system of the drum washing machine, is practicable.
通过上述研究，得到了目前采用平面模型分析所不可能得到的许多新的认识，可作为整体厂房结构抗震设计的参考。
Based on above results much information is obtained, which cannot be obtained by plane structural model analysis. The results can be used as reference for earthquake-resistance dyn…
在一些情况下，完全可以采用平面地球模型，通过牺牲一些精确性来获取速度。
In some cases, it is perfectly acceptable to assume a flat model of the Earth and lose some accuracy in exchange for speed.
采用连续分布位错模型讨论和分析了受远处载荷下半无限平面自由边界附近任意方位的裂纹问题。
With a continuously distributed dislocation model, this paper deals with cracks inclined to a free surface of a semi infinite plane under remote loadings.
建立了U形无加强波纹管结构分析的有限元分析模型，采用ANSYS有限元软件对其在不同平面失稳工况下的应力响应进行了计算。
The finite element analysis model to the U shape bellows is presented and calculated by the ANSYS program under diverse loads for in plane instability.
方法对39个甲状腺实验模型及74例甲亢患者分别采用SPECT体积积分法及平面成像法估测甲状腺重量。
Methods thyroid volume (mass) was evaluated by spect volume-integration and by plane image method in 39 experimental thyroid models and in 74 patients with hyperthyroidism, respectively.
采用该模型，成功地对平面应力条件下岩土材料单轴受压和单轴受拉试件的局部化破坏分别进行了数值模拟。
Shear band formation due to void nucleation and growth were successfully simulated in a specimen of geomaterial under plane stress compression and tension by the model respectively.
采用烧结的平面物理模型，实验模拟底水绕过上窜夹层的动态过程。
The dynamic process of bottom-water bypassing interbed and fleeing upward is simulated by using sintered planner models.
本文采用三维有限元模型分析了荷载作用下自上而下裂缝尖端的应力强度因子，并与二维平面应变模型分析的结果进行比较。
In this thesis, the stress intensity factors of top-down cracks caused by loading are calculated using three dimensional finite element model and compared to the results of plane strain model.
该模型采用三层平面布置的带电圆盘来模拟雷云空间，雷云静电场的计算采用镜像法。
The model simulating thunderstorm cell by means of three layers plane charged disk, the calculations for thundercloud electrostatic field use mirror method.
编制了损伤模型的平面非线性有限元程序，并采用损伤模型和常规有限元模型的有限元程序对某矿山边坡进行对比计算分析。
A plane nonlinear program of damage module is compiled. The FEM program of damage module and conventional finite element module are used to calculate and analyze a mining slop.
采用平面二维数学模型计算了温排水扩散深度为全水深和掺混层两种情况。
The diffusion effects of two types of diffusion depth of cooling water, such as the whole water depth and the mixing zone, are calculated by using a two-dimensional mathematical model.
目前在相似材料模拟试验中，常采用平面应力模型与平面应变模型两种受力状态。
At present, two stress states — the planar stress and the planar strain are usually adopted in the modeling experiment of the equivalent materials.
模型中使用两种位移边界条件，并采用平面应变条件进行计算。
Two types of displacement boundary condition are considered in the numerical model.
采用平面二维水流、温度场和水质数学模型对流场、温度场和浓度场进行了数值模拟，并对电厂温排水的热影响和水质影响进行预测。
The temperature field and the contamination concentration field were Simulated. Using 2-D numerical simulation model, The effect of thermal discharge on hydrobiont water quality were predicted.
建立截流龙口附近的水流数学模型，多采用平面二维模型。
In establishing current mathematical model near the closure gap, two-dimensional model is usually adopted.
采用平面类脂双层模型分析外加高压静电场对植物细胞跨膜电位的影响，并探讨其微观机理。
The paper depicts the influence on the plant cellular, caused by the added high electrostatic field, by the bimolecular lipid membranes, and deduces the micro principles.
采用平面二维水流温度场数学模型，对池州电厂的温排水流场和温度场进行数值模拟。
The flow field and the temperature field of thermal discharge in Chizhou Power Plant is simulated by adopting the mathematical model for two-dimensional flow field and temperature field.
采用平面二维水流泥沙数学模型计算了赣江大堤南昌段堤线改线对河段水流运动及河床冲淤的影响。
By using a 2-d sediment mathematical model, influences of riverside relocation of Nanchang reach of Ganjiang river on flow, scouring and silting were computed.
平面有限元计算，可以为了解具体工程条件下规程规范中采用的杆件系统计算精确程度，检查平面计算与三维整体模型成果的误差。
Plane FEM has capability of knowing precision degree of results by member structure method, and contracts with these of three dimensional whole model.
本文基于三角形网格划分，采用有限元法，建立了平面二维非恒定潮流数学模型。
Based on triangular grids and finite element method, a planar 2-d unsteady tidal flow mathematical model is established in the article.
采用了平面管的线性有限元数学模型和1：4.4缩比的简化管束模拟体。
A planar tube mathematical model of linear FEM (finite element method) and simplified model tube bundle on the scale of 1:4. 4 are used in the study.
设计方案中对已有的数字高程模型进行加密内插，使用三角化方法来计算地表曲面面积，采用参考平面法实现区域通视分析。
Then triangulation is used for the calculation of a polygon's surface area, and viewshed analysis is carried out using the method of reference plane.
采用二维平面模型，“以静代动”的荷载简化方法，建立沥青路面永久变形有限元分析模型。
The two-dimension plane model and the simplification of dynamic loading are applied to create the finite element model for asphalt pavement permanent deformation analysis.
前言：采用三种不同沉积韵律平面模型试验研究水驱后聚合物与水气交替联驱提高原油采收率的驱替特征。
This paper applies three area models of different sedimentary rhythms to investigate some characteristics about polymer-WAG associated flooding for EOR.
运用结构力学方法建立易于解析的大型结构平面模型；采用商业有限元软件建立能精确反映结构真实受力的空间模型。
Taking internal force of plane model as input and that of space model as output, specimen collection is established.
采用平面二维水流泥沙数学模型进行堤线改线影响计算，模型考虑了悬移质及推移质泥沙运动、桥渡及料场的阻力变化。
The2-D flow and sediment mathematical model is used to compute the effect of the engineering of riverside embankment change.
采用平面二维水流泥沙数学模型进行堤线改线影响计算，模型考虑了悬移质及推移质泥沙运动、桥渡及料场的阻力变化。
The2-D flow and sediment mathematical model is used to compute the effect of the engineering of riverside embankment change.
应用推荐