本课题采用嵌入式系统开发智能仪表(控制器)。
This item use embedded system to develop intelligent instrumentation (controller).
本文介绍了一种采用嵌入式系统来实现多串口转换网关的方法。
This paper introduce a way based on embedded system that can realize the serial ports conversion gateway.
由于采用嵌入式系统构架的技术优势，系统可以很方便的进行功能扩充，有着广阔的发展前景。
Because of the technique advantage based on the embedded system frame that I adopted, the audio system could be extended functions easily, and has a bright future.
病人端心电监护仪的实现采用嵌入式系统技术，具有成本低、体积小、重量轻、功耗低、稳定性高等特点。
By using embedded system technology, the client has the features of low cost, small volume, light weight, low power, high stability and so on.
该分析仪选取以ARM7TDMI处理器为核心的软硬件开发平台，采用嵌入式系统设计方法进行软硬件的设计开发。
The analyzer chooses an ARM-based software and hardware development platform and designs with the embedded system hardware and software design method.
基于ARM微处理器的嵌入式系统已经得到了广泛应用，通过采用嵌入式系统的模块化设计方法，可以缩短研发周期和降低开发成本。
Embedded system based on ARM microprocessor has been widely used. By adopting the modularization design method of embedded system, it can shorten the development cycle and reduce development costs.
Philip Fisch说：“子系统与现在生产的P5训练系统是互操作的，因此采用基于吊舱或者嵌入式P5系统的战斗机飞行员可以用F-35系统来训练。”
“The subsystem is interoperable with P5 training systems now being produced, so fighter pilots using pod-based or embedded P5 systems will be able to train with F-35 systems, ” he said.
基于Linux的嵌入式系统通常采用一个规模更小的内核和应用程序堆栈，这比提供的嵌入式设置更适合受限制的环境。
Linux-based embedded systems typically employ a smaller footprint kernel and application stack that is better for the constrained environment than an embedded setting provided.
本论文完成的具体工作包括：采用TMS320C6712和EPM7128S为控制器件，设计制作了一个可以脱机自主运行的嵌入式高速信号处理系统。
The main research work of this paper includes:Designed and established a high speed embedded signal processing system with the controller of TMS320C6712 and EPM7128S.
该仪器以最新的片上系统芯片FPSLIC为核心处理器，以RTX51为嵌入式操作系统，采用大屏幕液晶显示，实现了多路高速数字信号的逻辑分析。
This instrument uses System on Chip FPSLIC as its core processor, RTX51 as embedded systems and large LCD as displaying, which can analyse many channels logic signals.
本文结果表明采用DSP芯片与网络接口芯片相结合的方案能够实现嵌入式系统网络接入。
This result indicates the scheme that combines chip DSP with interface chip of network can realize embedded systematic network accessing.
基于TCP/IP协议思路，在嵌入式系统中研究采用数字信号来实现音频信号的传输。
Study of the transmission that about aural signal realized by digital signal, at embedded system based on the TCP/IP protocol.
方法：采用ARM嵌入式系统，并与G PS模块、北斗接收机和数传电台进行串口通信，实现数据的传输。
Methods an ARM embedded system was used to achieve data transmission by implementing serial communication with GPS module, Beidou receiver and wireless digital broadcasting station.
基于嵌入式系统的微机自动准同期装置，采用模块化和开放性设计思想。
The auto quasi corresponding-period equipment based on an embedded system, which used modular and open design ideas.
嵌入式倾斜仪采用ARM7作为系统核心，配合高性能的加速度传感器，通过实时测量加速度实现倾斜角的监测。
The embedded clinometer, which uses ARM7 as the operation core to cooperate with a high performance acceleration sensor, achieves measuring the angle by real-time monitoring the acceleration.
所提出的采用新型嵌入式系统设计通信管理机的方案，性价比高，实用性强。
The proposed communication processor design scheme based on the new embedded system is practical with high performance-cost ratio.
该方案通过采用双dsp、嵌入式rtos及合理任务划分策略保证了系统的实时性要求，并将网络数据传输率需求控制在可行范围内。
Through using two DSP, embedded RTOS and reasonable task-assigned strategy, the system demand for real time and data transmission speed of network are ensured.
系统采用模块化设计，通过人机交互界面实现对嵌入式网络终端的遥测和遥控功能。
The system is based on modular design. It completes remote control and remote measure of embedded network terminal based on man-machine interface.
本文介绍了采用精简TCP/IP协议在单片机上实现的嵌入式WEB发布系统。
Using the simplified TCP/IP protocols in the single_chip computer, a kind of embedded WEB publishing system is realized.
群控系统采用分布式控制，各节点以嵌入式微控制器为核心，实现电梯群控系统的硬件系统。
The distributed control technology is used in this system and every node is based on embedded microprocessor.
在详细分析DES的基本原理和应用模式的基础上，结合DES硬件实现的特点，采用正向设计的方法实现了适用于IC卡等有嵌入式安全需要的系统中的DES模块。
On analysis of the principle and application mode of des, a des module which fits for embedded security system such as IC card is realized by topdown design methods.
系统采用芯片AT89S52，通过嵌入式C语言编程实现信号的采集。
The system adopts the AT89S52, and by using embedded C programming language realizes signal collection, processing, display and printing.
嵌入式系统开发过程中，目标软件调试工作最终需要采用交叉调试方式进行。
In the development process of embedded system, object software needs to be debugged by means of cross-debugging.
在硬件设计中，本课题采用了基于ARM处理器组成的嵌入式系统平台。
In the section of the hardware design, the embedded platform consisted of ARM processor is used in this project.
介绍一种基于ARM的小区供水嵌入式智能控制系统，它采用了ARM7内核的工业级微控制器LPC 2129。
An embedded intelligent control system of water supply for community based on LPC2129 with ARM7 kernel is proposed in this paper.
TI公司推出的TMS320C 6000系列以其处理能力强、开发工具高度集成等特点被大多数嵌入式图像压缩系统所采用。
The TMS320C6000 series of ti Company has been used in many image compression systems for its good processing capacity and the high integration.
作为嵌入式系统的核心，嵌入式处理器目前常采用8位或16位微处理器。
As the core of the embedded system, the embedded processor often adopts 8 or 16 microprocessors at present.
系统硬件采用了嵌入式PC、通讯接口卡和现场总线数据采集模块。
The hardware is constructed with embedded PC, communication card and field bus data acquisition module.
本文将以开发嵌入式网络数字视频监系统为背景，先介绍了采用的MPEG4技术标准的特点。
This thesis, which takes the development of the embedded network digital video monitoring system as its background, introduces the MPEG4 technique standards above all .
由于采用了嵌入式设计方法，系统的电路得到简化，还提高了系统的可靠性。
Using the embedded design, the circuits of the system are simplified, and the reliability is improved.
应用推荐