采用伺服控制，实现高精度定位，尺寸准确。
Double servo control, high precision orientation, size more nicety.
阐明根据工艺特点采用工业流量伺服阀和蓄能器控制油缸压力可以满足稳定、快速、准确的要求。
Industrial flow servovalve combined with an accumulator has been used in controlling the cylinder pressure to ensure system stability, velocity, and accuracy.
一种采用脉冲控制方式，此种驱动器与电机闭环，但不反馈到数控系统，这种驱动器在某种程度上可称为开环控制的伺服控制。
A kind of the pulse control mode, the drive and motor closed loop, but not to the numerical control system, the feedback device, in a sense, can open loop control called the servo control.
提出了伺服阀的位置控制和颤振的控制关系上采用可切换的双通道控制形式的设计思想。
In dealing with the relationship of the servo valve position control and the adaptive control, the Double-loop control is adopted.
采用交流伺服电机作为驱动器件，可以和直流伺服电机一样构成高精度，高性能的半闭环或闭环控制系统。
Adopting ac servo motor as the driving device, can the dc servo motor and a high precision, high performance as the half closed loop or closed loop control system.
根据电液伺服系统的故障特点，本文提出了采用模糊神经网络做在线辨识器的容错控制方案。
According to fault characteristic of the electro hydraulic servo system, this paper has proposed a fault tolerant project that USES the fuzzy neural network as an identifier on-line.
介绍了采用元器件计数预计法的伺服驱动控制的平均故障间隔时间(MTBF)实用计算方法。
The paper introduces a practical method to calculate the mean time between failures (MTBF) of ac servo controllers, using the components counting prediction method.
台架性能试验验证表明，采用这种伺服控制方式，电动助力转向系统快速回正时的平稳性有所提高。
The bench tests proved that the return ability of the EPS system under rapid steering had been greatly improved by this servo control technique.
对采用电液伺服控制实现加载的力矩负载模拟器进行了深入的分析和研究。
This paper carries out the thorough analysis and research to the momental load simulator by means of electro hydraulic servo control to realize loading.
选用动态混合时，采用新型混合器，伺服电机控制，转速可调，而且噪音很小。
The dynamic hybrid, using a new type of mixer, servo motor control, speed adjustable, and the noise is very small.
整机采用电脑、人机对话、伺服系统控制。
The whole machine is controlled by the computer, touch screen and the servo-drive system.
系统提出采用闭环位置伺服控制，建立跟随误差和数字反馈的模型和算法。
The system proposes the application of a closed loop position servo control and sets up a model and algorithm of er ror tracing and digital feedback.
针对一个具体的直流pwm伺服系统，采用这种离散滑模控制策略进行控制。
DC PWM servo system is controlled by this kind of discrete sliding mode control strategy.
收放卷单元：采用伺服马达，自动控制张力，同时采用无芯式气胀轴加料。
Accept rewind unit:using the servo motor, automatic control tension, adopted without rui chirise shaft clip material.
通过采用轴伺服阀，可实时控制并产生正弦曲线和三角波形曲线。
It can control and graduate sinusoidal curve and triangle wave curve by using axis servo valve.
本机采用全自动伺服电机或步进电机控制长度，操作简便，封齿清晰美观。
This machine adopts full automatic servo motor or step motor for dead length, easy to operate, and the sealing is clear and beautiful.
在济钢ASP1700薄板坯连铸连轧项目中，连铸机结晶器调宽系统采用了新型全数字交流伺服控制系统，代表当今世界最先进控制水平。
In the project of ASP1700 thin slab continuous casting and rolling, the system of mould width adjust in the continuous casting is equipped with the new digital alternating servo control system.
采用伺服驱动器的速度控制和位置控制相结合的方法实现天车定位和吊臂运动的精确控制。
The combination of speed control and location control of servo driver realized the accurate control of crane's location and steeve's movement.
为了实现高速度、高加速度和高精度伺服系统的设计，系统的位置环采用智能PID控制。
Then, the paper analyzes a kind of intelligence PID control method and design the intelligence PID controller for the servo system.
通过适当的选取图像特征，实现了摄像机工作空间运动目标跟踪的视觉伺服任务，并采用扩展卡尔曼滤波控制方法完成机器人视觉伺服控制。
Floating object tracking in the whole working space of a camera can be obtained through selecting image features, and Kalman filtering control was adopted to realize visual servo control of robot.
纬纱张力系统是一个非线性、时变的系统，针对这一特点，采用模糊pid算法进行伺服控制。
Tension of warp system is time-variant and nonlinear system. According to characteristic of tension of warp system, Fuzzy-PID algorithm is adopted.
其闭环工作模式采用了视觉伺服控制方法，开环工作模式则采用了天文跟踪方法；
A visual servo scheme is employed for the closed loop mode, while astronomy theory is used for the open loop mode.
其液压系统采用伺服比例控制技术，简单实用，满足了生产要求。
The servo-proportional control technique is adopted in its hydraulic system. The system has reached production requirement with simplicity and practicability.
文章主要研究的内容为利用PCM控制技术，采用自适应PID控制算法，对开关阀式气动马达位置伺服系统进行实验研究。
The paper mainly focus on the experimental research on pneumatic on-off valve motor position servo control system with PCM control method and self-adjusting PID algorithm.
介绍了虚拟仪器技术并采用虚拟仪器实现了电液伺服控制系统的计算机辅助测试。
The CAT system for electrohydraulic servo control system based on virtual instruments was introduced. The structure of system is based on PC-DAQ.
在此基础上，采用控制周期总体间隙状况和局部短路的伺服控制策略，建立了基于模糊控制技术的回转式电火花展成加工伺服进给控制系统。
And adopting the method in which including periodical detecting and local detecting of gap discharge state, the servo feed control-system based on fuzzy control technology was designed.
采用高性能伺服电机控制的送标器，确保其拥有高速、精度的特点。
Due to the high performance servomotor in labeling module, the labeling system embraces the high speed and precision.
采用高性能伺服电机控制的送标器，确保其拥有高速、精度的特点。
Due to the high performance servomotor in labeling module, the labeling system embraces the high speed and precision.
应用推荐