通过计算机数值模拟，得到了单速车道和多速混合车道元胞自动机交通流模型的基本图，并对这两种模型的交通流特性进行了分析和讨论。
Via computer numerical simulation, the fundamental diagrams of the single-speed lane and multi-speed lane CA traffic flow models are got, and these two models' traffic flow characters are presented.
通过对火灾时烟气发生量及烟气流场的分析，建立了舞台空气幕计算的数学模型并求数值解。
Based on an analysis of the predicted volume and flow field of the smoke generated in case of fire, sets up a mathematical model and works out its numerical solution.
通过数值计算、模型试验和现场观测，对通榆河与苏北灌溉总渠立交地涵的泥沙淤积进行了综合分析。
By means of numerical calculation, model test and field investigation the sedimentation of the underground culvert at the main irrigation canal in North -Jiangsu Province was analysed.
对某水库土坝水平铺盖裂缝处淤填黏土固结过程的数值计算结果通过室内模型试验得到了验证。
The numerical calculation result of the consolidation process of warping clay in the blanket crack of a small dam is verified by model test and engineering practice.
阐述了通过建立现今地质构造模型、地应力测量和数值计算确定煤层及围岩原岩应力的方法。
The author expatiated the methods that confirm initial stress in coal seams and wall rocks by setting up present geological structure's model and using geo-stress survey and numerical calculation.
利用将水体中的污染物作为保守物质的水质模型，通过数值模拟，计算得出的博斯腾湖湖水矿化度与实测资料基本吻合。
A water quality model considering pollutants as conservative materials is presented, and the numerical simulation results of salinity in Bosten Lake are found agreeable with the measured results.
通过合理分析提出了便于计算多波长双向抽运光纤拉曼放大器信号及噪声功率的实用数值模型，给出求解信号和噪声功率的快速算法。
A novel numerical model and an efficient algorithm are developed to calculate the powers of signal and noise light waves in multiple wavelengths bidirectionally pumping fiber Raman amplifiers.
该图形化模型(220)的容积可以通过圆盘规则计算，并且显示随时间变化的容积的图形显示或者数值显示。
The volume of the graphical model (220) may be computed by the rule of disks, and a graphical or numerical display of the changing volume with time displayed.
目前为止，当气候模型学家在计算机上运行他们的模型之一时，他们会通过为模序的参数设置一组可行但是虚构的数值来给这个模型“播种”。
Until now, when climate modellers began to run one of their models on a computer, they would "seed" it by feeding in a plausible, but invented, set of values for its parameters.
本文根据实例及这一结构系统的特点，通过理论分析及数值计算，建立了系泊导管架的动力分析模型，为以后类似的工程提出了有效实用的解决方法。
The dynamic analysis model is presented on the basis of examples and this structure system characteristics by way of theoretical analysis and numerical calculation, which can be applied fo…
通过算例证实了该数学模型的正确性，为同步发电机的不对称运行方式分析的理论研究和数值计算提供了一种新的方法。
The correctness of the mathematical models is proved by example, which provides a new method to analyze the conditions of non-symmetrical operation of synchronous machine.
介绍了一个运用于摆式车辆的动力学性能仿真的数值计算模型，特别考虑了曲线通过工况。
A numerical model for the simulation of the dynamic behaviour of a tilting body railway vehicle is introduced, with particular attention to the curve negotiation conditions.
该模型避免了数值奇异，其可靠性通过计算和实验的对比得到了验证。
The model avoids numerical singularity and its reliability is verified by the comparisons between predictions and experimental data.
最后，通过对该理论模型中流场方程的封闭性研究，简单分析了进行数值模拟计算的可行性。
At last, the feasibility of the numerical simulation computing about this model is analyzed simply through investigating if the flow-field equations in this model are closed.
通过理论分析及数值计算，首先对框架结构施工仿真分析的几种常用计算模型进行了比较及分析，指出各自的特点及存在的问题。
Through theoretical analysis and numerical calculation, comparison and analysis is carried out of the models often used with the frame structure on construction emulation analysis.
采用三维有限元数值分析法，通过建立三维有限元计算模型，分析堵塞长度对堵塞区有效应力场的影响。
Three dimensional finite element computing model is established and the effect of stemming length to deep hole bench blasting is studied by three dimensional finite element method.
通过实验及编程计算，得到了气体压降数学模型中实验关联系数值。
Using the experimental data and the calculation program, the experimental correlation coefficients of the models of gas pressure drop were obtained.
通过带调压室水电站的模型试验和数值仿真计算，分析了阻抗式调压室在各种水力过渡过程下的水力工作特性。
The hydraulic characteristics of the throttled surge chamber under various hydraulic transition processes are analyzed through combination of numerical simulation and model test.
通过对墙体非稳态传热数值计算方法的研究，确立了本文理论模型计算的方法。
Confirm the calculating method of theoretical model, through researching the calculating method of wall's unsteady heat transfer.
并通过解析模型和数值计算两种途径从理论上较好地解释了实验结果。
Also, using analytic?! Model and numerical calculation, the experimental results are simulated successfully.
通过数值计算和推导，建立了系统驱动力矩计算模型；
Using the numerical calculus and derivation, the calculation model of system driving torque was established.
在本模型中考虑了土壤特性（如密度与剪切模量） 沿深度的非均匀变化，通过对典型场地剖面的数值计算探讨了有关因素对场地地震反应的影响。
In thiS model, non-uniformly variations of soil density and shear modulus with depth are taken into consideration. Numerical computations are conducted for typical cases.
为了研究极端海况下的海床响应，在数值波浪水槽中模拟了畸形波的传播并通过波浪场和海床耦合模型计算了畸形波作用下有、无直立堤时的海床响应。
The freak wave is simulated to investigate seabed response with or without presence of vertical breakwater by the coupled model of numerical wave tank and seabed response.
通过数值计算，建立了制备过程中硅基底中的硼离子的空间浓度分布的理论模型，优化了二次硼扩散工艺条件。
The model of the Boron ion spread in wafer was analyzed by numerical simulation and the micro resistor fabrication conditions were optimized.
通过采用计算流体力学数学模型对催化转化器内流场的数值模拟，并与实验结果进行比较，验证了模型的准确性。
A computational fluid dynamics model was used to simulate the flow field of catalytic converter, and which was compared with the experimental results as to demonstrate the model validation.
通过建立数学模型，数值计算了组合光纤中SBS形成的过程，并对其特性参数进行了一定的理论分析。
By numerical calculation the whole SBS process in combined fiber has been illustrated clearly and its key characters have been discussed.
通过与国外结论的比较证明了本文理论分析中所建立的数学模型、采用的数值计算方法是准确和合理的。
The mathematical model and numerical method used in theoretical analysis is proved to be accurate and reasonable through comparison with foreign conclusions.
建立了低温地板辐射供暖系统传热过程的数学模型，通过数值模拟，用有限差分法计算了地板内的温度场。
A heat transfer model of the radiant floor heating system is established in this paper, and the temperature field in the floor is obtained by means of numerical simulation.
通过理论分析提出一种考虑叶片端部间隙影响的叶片力亏损模型，并对三种轴流压气机叶栅的端壁边界层及叶片力亏损进行了数值计算。
A new model is presented for calculating the end-wall boundary layer and its blade force defect inside the axial compressor cascade, based on theoretical analysis.
通过理论分析提出一种考虑叶片端部间隙影响的叶片力亏损模型，并对三种轴流压气机叶栅的端壁边界层及叶片力亏损进行了数值计算。
A new model is presented for calculating the end-wall boundary layer and its blade force defect inside the axial compressor cascade, based on theoretical analysis.
应用推荐