通过扫描电镜研究了激光刻花轧辊上刻花点的微观结构。
This paper studied the microstructure of laser texture rolls by SEM.
本文通过扫描电镜观察了五种中国藓类孢子的形态特征。
The spore morphology of 5 moss species in China(1) Oncophorus virens(Hedw. ) Brid.
并且通过扫描电镜观察分析微胶囊的形态结构和分散情况。
And, the surface morphological structures of the prepared microcapsules were observed with SEM.
通过扫描电镜研究温度–拉应力共同作用下砂岩破坏的断口形貌。
The scanning electron microscope(SEM) is employed to study sandstone fractography under thermo- mechanical coupling effects.
去除芯层后，通过扫描电镜测试，可观察到结构规整的中空超细纤维。
After removing core layer, regular hollow structure of microfibers can be observed by scanning electron microscopy tests.
通过扫描电镜和适射电镜观察表明，多种真菌超微结构都能得到良好的固定。
Observed with scanning electron microscope and transmission electron microscope, it showed that many kinds of ultrastructure of fungi were well fixed.
通过扫描电镜观察分析拉伸及拉伸-定型处理对人发及羊毛鳞片层的改性作用。
The modifying function of cuticle layer of human hair and wool by stretching and stretching setting treatment has been studied and analyzed through scanning electric microscopy (SEM).
并通过扫描电镜、紫外和红外光谱、元素分析对CSCM的结构进行了初步表征。
CSCM are primarily described by scanning electron microscopy, UV spectrum, IR spectrum and Elemental analysis.
首先，通过扫描电镜(sem)和透射电镜(TEM)确定了产物的形貌和纯度。
First, the shape of products was conformed by scanning electron microscopy (SEM) and transmission electron microscopy (TEM).
通过扫描电镜和电子探针发现，LY12型铝合金棱角部位阳极氧化膜产生了裂纹。
SEM and EPM results indicate that cracks form at edges and corners of LY12 aluminum alloy's oxide film.
通过扫描电镜、能谱分析等方法，对铸铁件和铸钢件表面渗铬层的组织进行了研究。
This paper researched the microstructure characters on the cast-chromized layer of the iron casting and the steel casting by SEM and energy spectrum.
研究了改性后胶膜的耐溶剂性能，通过扫描电镜研究了天然橡胶表面改性后的表面结构。
The solvent resistance of modified NR was studied and the microstructure was investigated by using scanning electron microscope.
通过扫描电镜等手段探讨了淀粉砂的成壳机理、能够形成强度的原因以及耐高温性能等。
This research inquired into the shell mechanism of starch sand, the strength mechanism and its high temperature properties.
通过扫描电镜对聚苯乙烯微球进行了形貌表征，激光粒度分析仪测量聚苯乙烯微球的粒径。
By scanning electron microscopy, the morphology of polystyrene microspheres was characterized, the particle size of polystyrene microspheres was measured by laser particle size analyzer.
通过扫描电镜观测了复合材料冲击断面的形貌，测试了复合材料的负荷变形温度和力学性能。
Impact rupture suface of the composites was observed by scanning electron microscope, and the load deformation temperature and mechanical properties were tested.
阎贺静等通过扫描电镜分析发现竹浆纤维横截面布满了孔洞。说明它具有优良的吸湿透气性。
Yan Hejing such analysis by scanning electron microscopy cross-section of bamboo fiber filled with holes, indicating that it has excellent moisture permeability.
本文通过扫描电镜对寄生山羊体的山羊蠕形螨生活史各期颚体、足体和末体的超微结构观察。
The present paper reports the scanning electron microscopy observation on theultrastructure of gnathosoma, podosoma and opisthosoma in the life cycle of Demodexcaprae.
通过扫描电镜(SEM)可以发现镍电极能牢固地附着在陶瓷体上并具有良好的欧姆接触性能。
Seeing through SEM, the base metal of Nickel paste can be accreted hard on the ceramics, and good ohm attachment is formed.
笔者通过扫描电镜观察，色质联机以及分子量分布手段分析膜清洗水，了解膜污染的物质构成。
The understanding of organic matters in natural water which is responsible for membrane fouling is needed.
通过扫描电镜对胶膜断面进行了表征，未经交联改性的断面很光滑，而经改性后的断面就很粗糙。
Scanning electron microscopy was used in characterizing film's break surface and results showed that section without cross-linking modification was smooth, and the modified section was very rough.
目的是通过扫描电镜（SEM）观察勐腊并殖吸虫成虫体棘、口、腹吸盘，为鉴别其虫种提供资料。
Objective:To identify the strain of Paragonimus menglaensis with scanning electron microscopy (SEM) based on the irsurface structures, oral and ventral suckers.
通过扫描电镜、透射电镜和EDS分析，对残余元素对连铸坯和热轧板表面质量的影响进行了研究。
The effect of residual elements on the continuous cast slabs and surface quality of hot rolled plates is studied by scanning electron microscope, transmission electron microscope and EDS analysis.
通过扫描电镜图片对木材试样横纹剖面的多孔结构特征进行了观察，并利用分形理论对其进行了分析。
The porous structure of wood samples on their cross sections was observed using the scanning electron microscope (SEM) images and analyzed via the fractal theory.
方法：通过扫描电镜观察并辅以计算机图像处理技术来对不同牙面处理组的树脂突形态进行定性、定量分析。
Methods: the morphology of the resin tags in different groups were analysed with the scanning electric microscope and computer image-processing technique qualitatively and quantitatively.
通过扫描电镜(sem)、腐蚀电位和电化学阻抗谱(EIS)等方法对改性聚氨酯的富锌涂层进行了表征。
The modified waterborne polyurethane zinc-rich coating was characterized by scanning electron microscopy (SEM), corrosion potential test and electrochemical impedance spectroscopy (EIS).
研究高能球磨法制备纳米钼铜复合粉末的主要影响因素，通过扫描电镜和透射电镜分析粉末的形貌及颗粒尺寸。
The main influence factors of preparing molybdenum copper nano-powder by high-energy ball milling were studied; the morphology and size of powders were analyzed.
通过扫描电镜等实验手段研究发现，热反应型聚氨酯整理后的羊毛纤维表面被树脂覆盖，纤维之间存在粘接点。
It was developed by SEM that the surface of wool finished by hot-reacting PU is covered by resin, and there are bond points between fibres.
通过扫描电镜、X射线衍射及硬度测量，对镀层在稳定化处理过程中的显微组织及硬化效应进行了测定与分析。
The microstructure and hardening behavior of the NiP deposit during stabilizing treatment were determined and analysed by SEM, Xray diffraction and hardness measurement.
通过扫描电镜、X射线衍射及硬度测量，对镀层在稳定化处理过程中的显微组织及硬化效应进行了测定与分析。
The microstructure and hardening behavior of the NiP deposit during stabilizing treatment were determined and analysed by SEM, Xray diffraction and hardness measurement.
应用推荐