系统通过仿真试验的验证，功能基本满足泵站现场测试要求。
The system can meet the basal field testing on large pumping stations according to the test by emulator.
通过仿真试验，对其结果分析得出城市快速路菱形立交出口附加车道长度及其渠化长度建议值。
Through using simulation trial, the author has analyzed the trial result and worked out the recommendation value of auxiliary lane and channelization length of urban expressway exit.
通过仿真试验检验了改进的迭代学习控制律能够使得具有随机干扰的被控系统达到稳定，而传统的控制律则不能。
The simulation test verify the controlled system with random disturbance can reached to stability by using improved iterative learning control law but not the traditional control law.
本文设计了信息融合处理的流程，实现了证据推理的算法，并通过仿真试验验证了证据推理在入侵检测中的可行性。
The process of data fusion is designed and the algorithm of D-S theory is implemented. The feasibility of IDS based D-S theory is validated in the trial.
通过建模、仿真及现场试验，提出了机组并联于大电网工况下的调速器PID参数整定范围和应有的机组功率控制模式。
On the basis of modeling, simulation and field test, proposed are the PID parameter setting range of the governor under the large grid operating condition, and the power control mode of the unit.
详细地介绍了系统的硬件设计和软件设计，并在仿真的基础上通过对方波信号的试验分析，验证了系统设计的可行性和正确性。
Hardware and software designs are amply introduced in the paper and through the test analysis using square wave 'the feasibility and validity of this design are affirmed.
由频响求解器直接得出电阻基体中点的加速度响应曲线，其仿真精度通过振动试验给予了验证。
The acceleration response curve of resistor body midpoint can be computed by direct frequency response solution, simulation precision is testified by vibration test.
最后通过对两个机械优化设计实例进行仿真试验，结果表明本算法求解效率高、收敛速度快、全局搜索能力强。
The simulation test was completed through two mechanical design cases. The result shows that the algorithm has high efficiency, rapid speed of convergence and strong capability of global search.
通过整车试验数据与相同工况下的仿真结果对比，表明所述模型可以以很好的精度反映汽车在各种工况下的动力学性能。
Comparing the test result and simulation result and simulation result in same maneuver, it is proved that the presented model gets vehicle dynamic performance by simulation in high precision.
通过台架试验和计算机仿真，获得转向工况下的模糊操作知识，为模糊换挡控制系统的转向控制提供技术支持。
Fuzzy operation knowledge of steering situation is obtained through stand test and computer emulation. It gives technology support for steering control of fuzzy gear shift control system.
通过仿真和空调系统模型试验证明了该方法在网络训练速度，抗干扰能力及各种传感器故障识别准确率等方面的有效性。
Effectiveness of the method in networks training speed, anti-interfering ability and identifying veracity of sensor faults are proved by simulation and model test of conditioning system.
通过理论分析、计算机仿真和试验研究分析了影响气吸滚筒式水稻精量播种装置播种性能的参数。
Through theoretical analysis and computer simulation and experimental study, analyzed effective parameters of the functions of suction drum-type rice precision seeder.
本文对水下航行器制导控制半实物仿真系统的结构和功能作了详细介绍，并以此半实物仿真系统为试验平台，通过试验对实时调度算法进行应用和验证。
This paper introduces the frame and function of underwater vehicle control and guidance hardware-in-the-loop simulation system in detail, which actor as the test flat, through.
通过虚拟样机技术，工程师可以运用机械系统仿真试验，在设计阶段发现产品设计中的潜在问题，并快速进行修改，减少了对于物理样机的依赖。
By simulation tests, engineer can not only discover the potential problems of design and modify it in time, but also decrease the dependence on physical model.
本文以天然气发动机燃烧循环变动为研究对象，通过试验与仿真方法，对燃烧循环变动的影响因素及诱发因素进行了研究。
This paper take the cyclic variations as the research objectives, analyses the factors which arose the cyclic variations of CNG engine, through experimental and simulation methods.
以正在建设的某公路刚构桥梁上使用的菱形挂篮为例，分析挂篮产生变形机理，通过挂篮加载仿真分析指导挂篮预压试验。
Take rhombic hanging basket of building a highway rigid frame bridge for example, analysis of rhombic hanging basket deformation theory, guide the basket pre-pressure test by basket load simulation.
文中进行了轴系故障的计算机仿真试验，并通过改变内燃机动力轴系参数的实测分析证明了该诊断方法是行之有效的。
Computer simulation for crankshaft failures is performed and through actual measurement and analysis by changing crankshaft parameters, the functional diagnosis method is proved to be effective.
通过仿真和电路试验证明，该滤波电路能将电流畸变率由原来的30.53%降低到9.45%，从而使交流侧的电流接近正弦波。
Both the computer simulation and model experiment prove that it can reduce the total harmonic distortion of the harmonic current from 30.53% to 9.45% and make the waveform approach to sine wave.
最后通过对控制系统的设计与仿真试验，与单一预测控制进行比较，证实了该方法的可行性与有效性。
Simulation experiments compared with single predictive control approve this method's feasibility and validity. The ability of dealing with the non-linear system is raised.
通过试验模块测量和数学模型仿真相结合的手段，达到了预测低磁钢筋混凝土结构非磁性建筑物空间磁场分布的目的。
The space magnetic field of a non-magnetic prestressed concrete building is predicted by the combination of sample model measuring and mathematical simulation.
通过仿真与试验，设计了脉冲固体激光掩膜加工器的电源电路及控制系统，并详细地分析了它的工作原理。
Then the pulsed solid state laser power and mask machining system is designed through simulations and experiments. And the system working theory is also analyzed.
为了分析国产化高速磁浮车辆的试验线路运行性能，开展了小半径曲线通过性能动态仿真研究。
In order to analyze the dynamical performance of Chinese-made high-speed maglev vehicle running on the test lines, the dynamical simulations of small radius curved-track negotiations were carried out.
最后通过大量仿真试验验证了分形特征和基准图的正确匹配概率之间的关系，对于景象匹配区的选择具有一定的实用价值。
Experiments validate the relation between acquisition probability and fractal feature of reference map, which is valuable for the selection of scene matching reference map.
通过与试验数据对比，该仿真模型具有较高的精度，可以用于研究高背压发电用柴油机在动态工况下的运行特性。
Comparing with test data, the simulation model shows high precision, thus could be used to study the dynamic characteristic of high back pressure electricity-generating diesel engines.
通过带调压室水电站的模型试验和数值仿真计算，分析了阻抗式调压室在各种水力过渡过程下的水力工作特性。
The hydraulic characteristics of the throttled surge chamber under various hydraulic transition processes are analyzed through combination of numerical simulation and model test.
通过带调压室水电站的模型试验和数值仿真计算，分析了阻抗式调压室在各种水力过渡过程下的水力工作特性。
The hydraulic characteristics of the throttled surge chamber under various hydraulic transition processes are analyzed through combination of numerical simulation and model test.
应用推荐