硬件设计主要围绕控制核心DSP展开，包括传感器信号的接入，数据输出通道设计以及CAN通信模块设计。
Hardware design is based on the main control DSP core, including designs of sensor signals collection, data output channel and CAN communication module.
并且详细介绍了测试系统中需要自行研发的RS- 422串行通信模块设计，包括串行通信模块总体框图和功能电路设计方案。
Then the design of the RS-422 serial communication module is introduced in detail, including the whole scheme of serial communication module and the design of functional circuit.
模块上的应用程序能够被设计为与中央的应用程序通信，或者在中央应用程序不可用的时候以幸存模式(Survivable Mode)切换到本地实例上。
The application on the module can be designed to communicate with a central application, or failover to a local instance in a survivable mode in case the central application is not available.
我们的设计将交通信息采集系统分为三个模块：处理模块、压缩模块和网络模块。
The transport information collection system is divided into three parts: processing module, compress module and network module.
针对通信设备的特点，采用基于模块化设计的快速设计技术；
Modular design is adopted in the rapid design technology aiming at the characteristic of communication equipment.
本文着重阐述了信号采集放大、HPI通信模块以及TMS320C 6713的其他外围电路的硬件设计与实现。
Puts emphasis on hardware design and realization of data acquisition module and the HPI communication module and other peripheral circuits of TMS320C6713.
课题重点研究了计费终端、低压电力线载波模块和数据管理中心的设计，并制定了相关的通信协议。
The thesis investigates the design of the data center, the module of low power line carrier and the data administration center, the thesis also constitutes the correlative communication protocols.
基于IEC61970标准设计的通信模块使得在线计算程序的“即插即用”成为可能。
The communication module, designed according to IEC61970, makes the "plug and play" of computation program possible.
介绍了串口编程技术，RS485总线驱动模式和RS485串口驱动程序。 然后在此基础上设计和实现了SDM300远程控制模块和异步信道的通信模块。
Findally, we implement SDM300 remote control module and Async communication module on the basis of introducing technology of serial programming , RS485 bus driving mode and RS485 serial driver.
对通信电源设备进行了模块化设计。
针对车载工控机系列移动工程机械，设计了一种板载GPS模块的CAN通信接口适配卡。
Aiming at construction vehicles with industrial PCs, this paper presents a kind of CAN communication interface adapter with onboard GPS module.
本课题所研究的内容是，设计并实现协调分布式阵列感应测井仪中各模块间通信的信息中转平台。
This paper presents the design of an "Information Transfer Platform" which manages the communication among all the subsystems of a distributed "Induce Array Well Logging Instrument".
本设计模块结构简单、数据传输可靠，可广泛应用于无线通信系统。
This design was used in wireless communication system widely because of its structure simple and data communication extensive.
此设计是一个电力线路实时监测系统中通信模块组成部分。
The design is a component of the communicate module in a power circuitry's real time inspect system.
同时主要对CAN总线节点的通信程序、家电通用控制器和数据采集模块进行了详细设计，并最终在开发环境下演示运行。
And it designs the CAN field bus node communication, the universal controller and the module of data gathering in details, and finally runs the system under the development environment.
该系统软件设计采用模块化设计方法，包括自动操作模块、手动操作模块、串行通信模块等。
The design of software applies the way of modularization and consists of auto-operated module, manual module and serial communication module, etc.
基于单片机技术，设计了一种智能化通信电源监控系统，并重点对整流模块监控单元进行介绍。
Based on the single-chip technology, an intelligent monitoring and control system for power supply system is designed, and the discussion is focus on its rectifier module control.
本文对计费系统的设计及各功能模块的实现进行了详细的论述，重点介绍了数据包捕获模块、数据通信模块和计费数据库的设计。
The thesis explicates the system design and its function models implementation, mainly fouces on packets capture model, data communication model and accounting database design.
全程负责网络通信接口模块的方案设计、详细设计、编码、测试。
Part of the summary design, detail design, coding and test of the communication interface module.
公司专业从事汽车通信器件、面向物联网的传感器、无线通信模块及笔记本触摸板的软件设计和开发。
The company is specialized in design and development of automobile communication devices, sensor devices for IoT, wireless communication modules and laptop touchpad software.
火炮系统装备导航，定位，瞄准和通信系统，全部采用模块化设计容易维护和升级。
The artillery system is equipped with navigation, positioning, targeting, and communications systems, all of which adopt the modular design for easy maintenance and upgrade.
此外，设计了数控镜片磨边机的硬件电路，完成了磨边系统usb数据通信模块的设计，并给出两种USB通信程序的设计方法。
In addition, the hardware of numerical control lens-edger is designed. The USB module is also developed and two methods for the design of USB communication program are introduced.
本文介绍了实时多任务监控系统的设计思想，着重阐述了RTMMON的核心模块：任务控制部、资源控制部、中断控制部及通信控制部的设计。
This paper describes the design of a real-time multitask monitoring system, and more on the kernel module RTMMON in: task control, resource management, interrupt process and communication.
设计了下位机控制单元的实现方案，包括外部扩展的显示模块(LED)、红外遥控模块、通信模块等的设计方法。
Design the realizing methods of controller unit, including LED display module, communication module, infrared remote controller module, etc.
本文设计的异步通信模块在实际系统中运行稳定可靠，证明了设计方案的正确性。
The asynchronous serial communication module designed in this paper is running stably and reliably in the real system, which proves the correctness of this paper.
设计了扩展通信模块和语音通信模块的硬件。
Designed the hardware of the extended communication module and voice communication module.
该数据采集系统采用TI公司的TMS320 LF 2407 A芯片为主控制器，另外设计了相应的外围信号调理电路、存储模块、通信模块等。
The data acquisition system adopted TMS320LF2407A chip of ti as main controller, in addition, designed peripheral signal processing circuit, memory module, communication module and so on.
该数据采集系统采用TI公司的TMS320 LF 2407 A芯片为主控制器，另外设计了相应的外围信号调理电路、存储模块、通信模块等。
The data acquisition system adopted TMS320LF2407A chip of ti as main controller, in addition, designed peripheral signal processing circuit, memory module, communication module and so on.
应用推荐