对带最大功率平台特性的螺旋桨设计点的选取、燃油限制功率的设定、燃油消耗量的计算等方面提出了新的看法。
Some new points of view are also brought in on choosing of propeller design point, setting of fuel stop power and calculation of fuel consumption.
介绍了控制循环锅炉的结构特点，水冷壁等系统的设计准则，水循环系统设计的计算步骤及设计中关键数据的选取。
The pressure parts construction, design criteria of water wall, calculation procedure of water circulation and selection of critical parameters for controlled circulation boiler are introduced.
介绍了弯曲件的弯曲成形工艺方案、工艺参数的计算与选取以及弯曲模具结构与设计，得出采用多道弯曲成形工序是合理的。
The bending process design, bending process parameters' calculation and selection, and bending die structure design for the forming of fixed board were all introduced in this paper.
文中介绍了爆破参数的选取、药量计算、起爆网路的设计、药包防水处理以及布药和注水工艺。
This paper involved the selection of blasting parameters, calculation of charge weight, design of priming circuit, waterproof treatment of charges and the processes of charge setup and water pouring.
土质高边坡工程的设计中，土性参数的选取对边坡稳定性计算结果的影响往往要比选用不同计算方法更为显著。
In the design of high soil slope, the influences of soil parameters are usually more significant than different calculated methods for the result of slope stability calculation.
但是多元复合地基的设计理论和计算方法并不成熟，承载力发挥系数无法精确选取。
Because of the design-theory and the method of calculation are not mature, so that the efficiency factor of bearing capacity can not be selected accurately.
论述了塑料注塑模直浇口式主流道参数的设计与计算方法，倾斜式主流道的形式、尺寸选取，最后举例说明了倾斜式主流道的应用。
The design and the calculation methods of the parameter of the routine main sprue and the style and the dimension selections of the leaning main sprue are discussed.
文中的参数选取及计算结果为今后偶氨型聚合色素单体的分子设计奠定了基础。
This results and PPP-MO parameters established a groundwork for designing the molecule structures of polymeric colorant monomers.
但目前的码本设计算法仍存在局部最佳、强烈依赖于初始码本的选取、鲁棒性较差和算法收敛较慢等问题。
However, the design for codebook yet strongly depends on the selection of the initial codebook, and it can easily be trapped in local minima, they seem to be much slow and little robust.
计算结果可应用于冷却水最佳流量的选取和电池堆的优化设计。
The results can be applied to determine the optimal flux of cooling water and to optimize the stack design.
介绍了车站的结构设计和计算，对其结构形式的选取、施工程序及模拟计算进行了论述。
This paper discusses the design logos of the station, makes technical discussions on the structure form extraction, structure form schemes and simulation computations.
对于大型大跨度钢结构工程，施工方法的选取及施工计算与结构设计同样重要。
For large span structures, construction method and construction design are as important as the structural design.
介绍了转门机柜的使用特点及其在雷达中的应用情况，阐述了转门机柜骨架的设计过程，包括尺寸系列选取、结构形式以及刚强度计算等方面。
It also introduces the procedure of the design of the revolving door cabinet, including the selection of the dimension series, structure, strength and stiffness computation.
由于岩体介质材料的特殊性，在地下工程围岩稳定性分析与施工设计的过程中，本构模型及其计算参数的选取对计算结果的可靠性有着重要的影响。
During the reliability analysis of surrounding rock and detail design, using appropriate model and parameters is very important to the result of calculation for it's special material.
基准选取对网架结构挠度计算影响很大，为了更好的评价网架的设计及施工质量，本文介绍三种不同基准选取方法计算检测挠度。
In order to evaluate the truss design and construction quality correctly, the deflection calculation methods using three different datum selections are introduced.
计算参数是按实际实验系统设计选取的。
The computational parameters are chosen in accordance with a proposed experimental system.
本文分析讨论了在设计寒冷海域结构物时，考虑冰载荷的影响、海冰物理力学特性对冰载荷的影响以及计算冰载荷的公式选用和有关参数的选取。
In this paper, the sea ice force acting on the structure, the ice physical mechanical properties and the parameters selecting in calculation equation proposed by API (RP2N) and others are discussed.
通过计算机辅助设计(CAD)的数字化基托模型，在自主研制的激光快速成形系统上，选取优化的激光快速成形工艺参数，制造了全口义齿钛基托。
Based on the computer aided design (CAD) digital base of complete denture model, a titanium base was made with the RS-850 laser rapid forming system, which processing parameters were suitable.
研究结果对于岩土工程设计和数值计算时岩样黏聚力和内摩擦角的选取具有参考价值。
The research results provide the reference value for the choice of the cohesion and internal friction Angle of rock samples in the process of geo-engineering design and numerical simulation.
对紫铜长支管T型管复合胀形工艺进行了试验研究，介绍了包括冲头挤压力的公式与计算，试验中所用复合胀形模具结构和部分重要零件的设计与选取及试验结果。
A technology to form copper long-branch tee pipe directly in compound forming of bulging and extrusion is developed, the formula and calculation of the forming force are introduced.
讨论了齿轮量柱直径选取原则和计算方法，对齿轮设计有特定白勺帮助。
The paper also discussed how to select and calculate the roll diameter of a gear, it will be helpful for the gear design.
讨论了齿轮量柱直径选取原则和计算方法，对齿轮设计有特定白勺帮助。
The paper also discussed how to select and calculate the roll diameter of a gear, it will be helpful for the gear design.
应用推荐