GradyBooch将面向Aspect的编程看作是标志软件设计和编写方法基础性转变的三大运动之一。
Grady Booch describes aspect-oriented programming as one of three movements that collectively mark the beginning of a fundamental shift in the way software is designed and written.
再次，论文分析了基于PC/104的嵌入式运动控制系统的软件设计。
Then, the software design of the embedded motion controller which based on the PC/104 bus is analyzed.
建模所得的实体模型直接用于运动仿真分析和有限元分析，缩短了设计所需的时间，减少了软件间的数据交换。
Entity model from modeling can be directly used in motion simulation analysis and finite element analysis, which shortens the design time and reduces the data exchange between softwares.
介绍一种机械手关节运动的PC机控制方法，它包括步进电机的驱动、硬件接口电路的设计、软件的编程方法。
This paper introduces PC control approach of joint motion of manipulator. This approach includes driving of stepping motor, interface design of hardware circuit and software programming.
目的：为病床控制系统测试平台设计一种能够进行数据采集与运动控制的上位机软件。
Objective: To design a upper computer software which can achieve data acquisition, display, motion control for sickbed-control test system.
讨论了基于运动控制卡的火焰切割机数控系统的软件设计中多线程技术的应用。
This article discussed the multi-thread technology application in numerical control system software design of flame cutter based on the movement control card.
第四章详细介绍了强地面运动观测系统各子系统的设计与实现，并阐述了其核心软件的实现与升级。
Chapter four: design and realization of the system of strong ground movement observation and its core software are introduced.
描述以基于DSP处理器为核心，用于激光快速成型系统的高速运动控制系统软件的体系结构及其开放式设计。
This paper presents an open software design of a DSP - based high - speed motion control system, which is applied in laser rapid - prototyping system.
TMC428是TRINAMIC公司最新开发的步进电机运动控制器，它可减少电机控制软件设计的工作量，降低开发成本。
The TMC428, which is a stepper motor motion controller, is a newest circuit of TRINAMIC Microchips GmbH. It is used to reduce the time of software design and the cost of production.
对运动控制卡的部分重要软件接口进行阐述和程序设计。
Then this paper represents some important software interfaces and it's programs.
最后设计开发了采用USB技术的数字运动控制系统的软件，包括USB设备固件程序、U SB设备驱动程序。
Finally, we analyse and design the software of digital motion control systems based on USB, including the firmware of USB device, the drivers of USB device.
采用MF C中基于对话框的程序设计模式设计了交互界面的软件，实现了空中运动体与地面控制站之间的无线通讯。
IT also USES MFC based on dialog programmer model to design the software of mutual interface. Finally IT realizes the wireless communication between air vehicle and ground.
介绍了平面机构运动分析和力分析交互式软件的设计思想、设计功能与设计方法。
In the paper the authors introduce the design methods of interactive software for analysis of motion and dynamics in plane linkage.
通过分析这些问题，并结合软件的模块化设计思想，有针对性的提出了一个机构运动方案模块化设计平台。
Through the analysis of these problems and combined with the idea of module, a design platform of mechanical movement plan module is put forward.
为提高灭茬刀辊设计的可靠性和效率，基于UG-NX 3软件，根据运动方程绘制刀刃运动轨迹，形象直观的获取动态隙角。
For improving the design reliability and efficiency of the stubble roller, visualized dynamic gap Angle was obtained though drawing blade moving track according to movement equation using ug - NX3.
本文从图像元素设计、动态效果设计、运动轨迹设计三个方面，讨论了多媒体软件中“小助手”的设计方法和技巧。
This paper has discussed "a small assistant" 's design method and skill in multimedia software from three respects such as element design, dynamic result design and sport orbit design, etc.
本文对多媒体计算机在运动解剖学教学中的应用进行了研究，介绍了系统软件和系统软件的设计及应用。
The application of multimedia technique to teaching bine-anatomy is studied, the design and application of system hardware and software are introduced.
本文通过拼接运动规律在平压模切机输纸机构中的应用原理的论述，介绍了一种平行分度凸轮机构设计软件的原理。
This paper discusses the principle of combination cam curves and its application in the paper feeder of die-cutting machine. It introduces the fundamentals of a parallel indexing cam design software.
在硬件设计部分，首先分析了高速套结机运动控制系统的功能需求，对系统软件开发环境和硬件开发平台进行了选择。
On the hardware design part, first analysis the functional requirements of the system, and select development environment of software and development platform of hardware.
同时还阐述用PMAC同时对上述两个测试项进行实时运动控制的硬件系统设计和相应软件流程图。
Two measurement items of hardware system and soft flow chart which are real-time controlled based on PMAC are described.
第二，用运动边界法处理相对运动，应用面向对象的程序设计方法，开发了可视化开关磁阻电机电磁场分析软件。
Second, a visual software for SRM electromagnetic field computation is developed by using object oriented programming, in which rotor movement problem is dealt with moving boundary method.
在系统工作空间内设计轨迹生成器，借助MATLAB软件工具，采用数值方法分别对同一路径下两种不同运动状态的轨迹进行了跟踪仿真控制。
Furthermore, the trajectory was designed in workspace of the system, and tracking controls under the condition of two different motions at the same route were simulated numerically with MATLAB.
软件采用模块化设计以实现了机器人运动功能。实验表明样机控制系统合理可靠。
The motion function of robot is achieved by modularized software design. lt has been proved that the control-system has high reliability and it meets the requirement of use in practice.
利用基于特征的机械设计自动化软件建立了TRT调节机构三维实体模型，并进行了装配干涉检查及运动仿真。
This paper has discussed how to produce 3D models and process dynamic detection for control mechanism of TRT by using feature_based mechanical design automatic software.
软件设计部分，针对运动目标的检测跟踪各种跟踪方法，详细研究并实现了基于时间差分的运动目标检测方法，完成了系统整体软件设计。
Part of software the motion target detection method based on timing difference has been researched, the software design has been completed.
首先，本文规划设计了系统的硬件与软件结合平台，包括图像采集模块、图像处理模块、运动控制模块三部分。
The Combination platform between the system's hardware and software is designed, in which three parts are involved: image collecting module, image processing module and motion control module.
本文采用虚拟样机技术，综合利用多种软件，实现试验装置在计算机中的设计—分析—修正设计—仿真运动—预测性能的设计思想，为后续项目做好准备工作。
This paper implemented the methodology of tester design-analysis-amend -forecast in computer by virtual prototype technique and manifold software. Make preparation for the subsequent projects.
本文采用虚拟样机技术，综合利用多种软件，实现试验装置在计算机中的设计—分析—修正设计—仿真运动—预测性能的设计思想，为后续项目做好准备工作。
This paper implemented the methodology of tester design-analysis-amend -forecast in computer by virtual prototype technique and manifold software. Make preparation for the subsequent projects.
应用推荐