同时发现当输入模的态为相干态和叠加数态的情况下，非线性克尔相互作用可产生纠缠。
The authors also find that the interaction of nonlinear Kerr media can generate entanglement when the states of input modes are prepared in coherent state and superposed Fock states.
然后把这些信息输入到配钥匙机，就可以配出一模一样的钥匙。
Then the information can be plugged into a key-cutting machine to produce an exact replica.
缺省的模板输出的XML与输入的一模一样，我们也没有必要进行任何修改。
The default template outputs the XML exactly as it is written — no changes required.
设备设计师能通过审慎地选择输入输出级电路的拓扑和共模阻抗来最小化失配或“非平衡”的效应。
Equipment designers can minimize the effects of these mismatches or "unbalances" through judicious choices of input and output stage circuit topologies and common-mode impedances.
可能出现的共模电流(ICM)从电压表的输入低端流到仪器的机箱公共端，经过大地再流到电压源的地。
Any common-mode current (ICM) that may be present flows from the voltmeter input lo to instrument chassis common, through earth ground to voltage source ground.
叙述了输入信号与L_1模反褶积解的稳定性的关系。
The. Relationship between input signal and stability of L1 norm deconvolution is described.
研究表明，增加引线数目、引线间距和加长顶线长度均可以增加天线系统的静电容，减小输入电抗的模值，并使天线的增益有所改善。
It is hold that one can increase static capacitance, reduce mode of input reactance and enhance the antenna gain by increasing down lead wires, their distances or lengthening the top loading wires.
再者，所用的放大器也要考虑在加到输入端的整个共模电压(范围内)输入偏置电流转换保持平滑。
Again, consider using AMPLIFIERs that exhibit a smooth input bias current transition throughout the applied input common-mode voltage.
工程师只需从丰富的盒型库中选择一款盒型，输入几个必要的参数即可完成盒型结构图的设计，软件立即生成包装盒的展开刀模图；
First, Designer needs to choose the box style from the database, after enter the size and edit the parameters, the software will finish the package expend die-cut automaticly.
当波导只传输主模(te_(10)模)时，求得从同轴线看去的输入阻抗的实部和虚部表达式。
When the dominant mode TE10 is propagated alone in the rectangular waveguide, expressions for the real and imaginary parts of the input impedance seen by the coaxial line are derived.
共模电压抑制了每个相对测量系统地线输入端电压的允许波动范围。
The common-mode voltage range limits the allowable voltage swing on each input with respect to the measurement system ground.
这种方法把图形软件和高级语言逻辑结合，大大简化了镶块模C A D系统设计中的图形输入。
This way, which connect advanced computer language with software for picture, simples inputting picture in CAD system of sectional die design greatly.
方法①提高整体电路共模输入阻抗以消除皮肤接触阻抗匹配失衡；
Methods High common mode input impedance of the circuit is used to remove the interference due to imbalance electrode impedance.
介绍了一种用于镶块模c A D系统设计的图形输入方法。
This paper introduces a way of inputting picture in CAD system of sectional die design.
在此基础上，利用导模与辐射模的耦合模理论较系统地描述了棱镜耦合器的输入、输出特性。
On this basis input and output coupling properties have been described systematically by coupled mode theory of guided mode and radiation mode.
此肌电放大器的前置部分采用共模驱动，以达到提高其共模抑制比和输入信号的动态范围，以及抑制工频干扰等作用，并采用线性光耦隔离。
Apart from employing the linear optocoupler isolation, this EMG pre-amplifier uses the boost to enhance the CMR and the input swing and reject the industry interference.
模型，压模计算机中输入和输出之间的交叉网，用作编码。
The network of intersections between input and output leads in a computer, functioning as an encoder or a decoder.
该算法产量低共模电压和电流，在可接受哒PWM输入纹波 和输出哒逆变器，并没有过电压 提问题不要像AZSPWM1。
The algorithm yields low common mode voltage and current, acceptable PWM ripple at the input and output of the inverter, and has no overvoltage problems unlike AZSPWM1.
为了保证制动控制的安全性和获得期望的纵向运动，设计鲁棒滑模控制器来跟踪给定的参考滑移率输入。
In order to provide safety and obtain desired longitudinal vehicle motion, a robust sliding mode controller is designed to maintain the reference input wheel slip.
针对已有方法难以应用到多输入-多输出情形的不足，提出了拟滑动模新的概念。
Because the existing methods are difficult to use for MIMO systems, a new concept of imitative sliding model is proposed.
结果三弹性腔九元件集中参数模型模拟出的输入阻抗模和幅角与目标输入阻抗模和幅角能较好的吻合。
G. Fung et al. Results the modulus and phase simulated by the nine-element lumped parameter model could fit the goal input impedance well.
采用关联设计思想，实现翻边模模型参数的输入与结构再设计的和谐统一。
The system uses associated design idea in order to realize input of flanging die model parameter and harmonious unification of structure redesign.
扰模区由一根输入直波导构成，分光区由N根输出直波导或由N根输出S形波导构成。
A mode-disturbing area is formed by an input straight waveguide, and a light-splitting area is formed by N output straight waveguides or N output S-shaped waveguides.
机动目标跟踪方法主要有变维滤波、输入估计方法和交互式多模方法。
The maneuvering target tracking(MTT) method includes variable dimension filter, input estimation and IMM, etc.
电路模拟证明这种简单结构具有很高的共模电压输入范围和很低的谐波失真。
This simple structure is proved through the SPICE simulation to have the very high common mode input voltage excursion and low harmonious distortion.
为提高放大器的抗干扰性能，放大器电路采用共模抑制能力很强的差模输入方式。
For improving the anti-interference ability of the amplifier, the Differential Mode input with high common mode restraining technology is adopted in amplifier circuits.
在多输入系统控制中提出了全程滑模变结构控制方案和利用等效滑模方程进行的递阶滑模变结构控制方案。
A global sliding model variable structure control approach and a sort of hierarchical switching scheme used with equivalent equation are proposed for a class of multi-input systems.
其91600系列多频道系统在双渠道的双向多协议数据多模光纤之上提供16路10位数字视频录像机的输入和输出。
The 91600 Series Fiber Multi-Channel System provides 16-channel input and output of 10-bit digitized video over one multimode fiber.
同时使用不同的输入、输出共模电压的方法来提高调制器的动态范围。
Different input and output common mode voltages are used to improve the modulator's performance.
本文针对单输入-单输出仿射非线性系统提出了一种基于模糊树模型的具有监督控制器的模糊滑模控制方法。
Based on fuzzy tree model, an adaptive fuzzy sliding-mode control strategy with supervisory controller is proposed for a class of nonlinear systems.
应用推荐