另一方面，为了兼容其他那些工作输入信号电压不为0的器件，如模数-数模转换器，信号电平也许要做平移。
On the other hand, the signal may require level shifting in order to be compatible with the input of other devices (such as ADCs) that are not designed to operate at 0v input.
检测器本身具有较高的分辨力，使彼此难以分辨的多个输入信号电压中的最大(小)者与其它输入电压间的差距在输出端加大变得易于分辨。
This detector has higher resolution, which makes the differences difficult to distinguish between the minimum (or maximum) input voltage and the rest enlarged and distinguished easier.
绝大多数的诊断故障码与计算机的输入电压或信号有关，并且作为一种永久性故障存在一段时间。
Most diagnostic trouble codes relate to the computer input voltages or signals and must exist for a specific period of time to be recognized as a hard fault.
输入模拟信号立即与所有的参考电压通过一串高速比较器进行比较，高速比较器用于产生二进制输出。
The analog signal is compared with all the reference voltages at once by a string of high-speed comparators whose outputs are used to generate the binary output.
放大器输入为电压信号，与光敏二极管产生的光电流信号成比例。调制光柱以断路器同样的频率照射光敏二极管。
The amplifier input is a voltage proportional to the photocurrent signal produced by a photodiode, which is irradiated by a modulated light beam at the same chopper frequency.
由于功率与电压平方成正比， 因此如果输入型号增大至两倍，输出信号将增大至四倍。
Since power is proportional to the square of the voltage, if the input signal is increased by a factor of two, the output signal is increased by a factor of four.
如果输入端的交流电压很大，其一部分信号被整流，于是在被测的直流信号中产生了误差。
If the AC voltage at the input is large, part of this signal is rectified, producing an error in the DC signal being measured.
输入信号是变送器输出的电压，电流信号。
Is the input signal transmitter output voltage and current signals.
它的功能是当感应到输入电压界限时提供一个锁存开关，通过外部时钟信号完成复位。
Its function is to provide a latching switch action upon sensing an input threshold voltage, with reset accomplished by an external clock signal.
它可以用于直接观察输入信号的电压波形。
Which can be used for direct observation of the input signal voltage waveform.
仿真结果表明：四种混沌源调制生成的混沌开关调制信号，均能够降低电源的输入电流及输出电压的频谱峰值。
Simulation results demonstrate: the chaotic modulation signals generated from the four kinds of chaotic sources can all reduce the peak level of the input current and the output voltage spectrums.
其特征是不要外接偏置电压源，而由一个特殊隔离变换器将输入逻辑信号变换为能快速开通或关断IGBT模块的驱动电力。
Its feature is that the input logical signal is converted to drive power by a special isolated converter, which makes a IGBT module turn on or off quickly, without any other biased voltage sources.
该电路采用恒流源供电的输入电路，提高了信号电压v _t与温度t的线性度。
The constant current supply for the input circuit is adopted, improving the linear relation between the signal voltage v, and temperature t.
仪器采用独特的高速磁隔离数字传感器直接采集输入的电压、电流信号，保证了数据的可靠性和安全性。
Using a unique high-speed magnetic isolation digital sensor to directly collect the signal of input voltage and current, ensure the data reliability and security.
仪器采用独特的高速磁隔离数字传感器直接采集输入的电压、电流信号，保证了数据的可靠性和安全性。
It USES a unique high-speed magnetic isolation digital sensor to directly collect the signal of input voltage and current, ensure the data reliability and security.
为避免输出信号波形畸变，输入电压的跃变应该是在给定推荐工作条件的范围之内。
To avoid output-waveform abnormalities, input voltage transitions should be within the range set forth in the recommended operating conditions.
R2的，R3的，和C2形成一个集成，产生一个输出电压成正比的脉冲宽度的输入信号。
R2, R3, and C2 form an integrator, which produces an output voltage proportional to the pulse width of the input signal.
高温材料，相控阵传感器，低电流的要求较稳定的输入电压，环境温度，或输出频率范围的输出信号。
The high temperature materials, phased array sensor, and low current requirements stabilize the output signals over a wide range of input voltage, ambient temperature, or output frequencies.
该转换器的高输入阻抗和低失调电压漂移输入增益级可以保证芯片在微弱电压信号下正常工作。
The designed converter could operate well with a slender supply voltage signal because of its high input resistance and low offset drift.
该运动控制卡能同时采集四轴的编码器脉冲信号，输出四路模拟电压控制伺服电机，同时能控制I/O信号的输入和输出。
The card can collect four axes' encoder pulse signals simultaneously, and control servo motor by four output analog voltage. Furthermore, it can control input and output I/O signals.
该控制器以PM U得到的区域间电压相角差信号作为输入信号，能够直接有效地反映区域间低频振荡特性。
This controller's input signal is the voltage phase Angle difference between two areas obtained by PMU, which can effectively reflect the inter-area low frequency oscillation characteristics.
输入信号可以从信号电流或相关的传感器或测量系统电压。
Input signals can be signal currents or voltages from the associated transducers or measuring systems.
参考电容器可以在第三时钟相位放电，这样输入信号依赖电压从电容器被释放。
The reference capacitor can charge at a third clock phase, thus the input signal is released from the capacitor dependently from the voltage.
第一级电路的第一输入端接收参考电压，而第二输入端接收输入信号。
The first stage circuit receiving the first reference voltage input, while the second input to receive input signals.
通过一种数字自动校准技术，可以校准差分运放及其输入信号所产生的失调电压。
A digital automatic calibration technique is developed to trim the differential OPAMP s input-referred and its former output stage offset voltages.
根据输入信号的幅度，该电荷泵可以提供两档电压轨来节省功耗。
According to the amplitude of the input signals, the charge pump has two level output voltage rails available to save power.
维持锁定的直流控制电压由鉴相器提供，因此鉴相器的两个输入信号间留有一定的相位差。
The maintenance locking cocurrent control voltage provides by the discriminator, therefore between the discriminator two input signal leaves leeway certain phase difference.
软件设计首先完成了PWM信号的输出与时序控制，并设计了键盘输入功能模块、LED显示功能模块、电流电压信号采样功能模块，以及模糊神经算法自学习软件功能模块。
The software design implemented PWM output and sequence control module, keyboard input module, LED display module, current and voltage sampling module and fuzzy neural algorithm self study module.
软件设计首先完成了PWM信号的输出与时序控制，并设计了键盘输入功能模块、LED显示功能模块、电流电压信号采样功能模块，以及模糊神经算法自学习软件功能模块。
The software design implemented PWM output and sequence control module, keyboard input module, LED display module, current and voltage sampling module and fuzzy neural algorithm self study module.
应用推荐