首先，介绍了软件总线和软构件的结构。
Firstly, the structure of software bus and configuration is introduced.
最后围绕该结构分析了软件总线的接口，设计了软件总线间的通信结构。
And around the architecture the paper analyzes the interfaces of software bus, designs the communication structure in software bus.
针对存在的不足之处，提出了基于软件总线控制的体系结构，并设计了相应的接口协议标准。
Regarding to this, an architecture based on the software bus-mastering is presented and a relevant interface protocol standard is designed.
针对目前国内外星载系统软件可重构性较差的问题，提出了一种基于软件总线的星载系统软件结构。
This paper proposes a structure of on-board system software based on software bus, for the poor reconfiguration of on-board system software at home and board at present.
针对目前国内外星载系统软件可重构性较差的问题，提出了一种基于软件总线的星载系统软件结构。
This paper proposes a structure of on-board system software based on software bus, for the poor reconfiguration of on-board system software at home and abroad at present.
这种构件化的信息系统可以使面向用户的各个应用系 统通过统一的软件总线协议访问业务处理服务器。
The information system is composed of components, and permits each user-oriented application to access transaction server by the uniform soft ware-bus protocols.
针对可重构制造模式对测试系统提出的在线升级和功能调整要求，提出软件总线结构的装配式可重构虚拟仪器系统。
A reconfigurable virtual instrument system is proposed, which can dynamically adjusts its measurement capacities to meet the need of the reconfigurable manufacturing system.
本论文研究了在电网企业中利用软件总线技术在企业内部各信息系统基础上进行系统集成，构建电网安全经济运行监测系统的问题。
This paper studies how to use software-bus for system integration inside the grid Enterprise on the basis of information system and how to construct monitor system of grid operation safe and economic.
服务总线构成了整个软件的基础，因此拦截点是通用的，这样可以最大限度地保证其适应性和适用性。
The service bus underpinned the entire software base, so the interception point was made generic to ensure maximum adaptability and applicability.
首先，让我们澄清这个模棱两可的概念——所谓的企业服务总线 (ESB)。 首先，它不是一个产品；其次，它不是一个虚幻的营销术语，不是专门用来诱导您购买更多软件的。
While Enterprise Service Bus (ESB) may seem like a vacuous marketing term designed only to get you to buy more software, the term actually has meaning for something useful.
DS： IBM软件集团的企业服务总线的概念是，它本身不是终点，而是到达终点的方法——一种制定自定义接口间更松散耦合的途径。
DS: Software Group's notion of the enterprise service bus is that it's not an end in itself, but a means to an end — a way to craft looser coupling between self-defining interfaces.
并入虚拟功能总线(Virtual Functional Bus,VFB)概念和行为的软件组件(Soft ware Component,SW - c)。
Software Component (SW-C) incorporating Virtual Functional Bus (VFB) concepts and behavior.
本文介绍了一种基于CAN总线的坦克射击基础练习训练系统，并对系统的总体设计、硬件配置和软件功能进行了具体分析。
This paper presents a kind of training system of tank fire basic exercises based on CAN bus. The overall design, hardware configuration and software functions are discussed in details.
本文介绍基于CAN总线的电梯控制系统，并对总体方案、软硬件设计作了分析，给出了具体设计电路以及软件流程图。
This paper introduces the control system of elevator based on CAN bus, analyses its hardware and software and provides hardware design and flow chat.
并对PCI总线在氡室检测系统中的具体硬件系统结构、控制芯片与驱动软件设计，与PCI总线对核谱转换的传输性能作了阐述。
And the specific hardware system structure, control slug and the design of drive software and the transmission performance of PCI bus for nuclear spectrometry were also set forth.
介绍了一种基于PC机的IS A总线步进电机控制卡，实现多轴联动控制，讨论了其工作原理和硬件结构设计、软件设计。
One kind of stepping motor control card based on ISA bus of PC which achieved multi-spindle linkage control is introduced, its principle and design of hardware construction and software are discussed.
论述了基于PROFIBUS-DP现场总线的浮法玻璃生产线的PLC双冗余控制系统结构、硬件组态以及软件实现情况。
The PLC double redundant control sys- tem structure , hardware configuration and software running status were described on the basis of PROFIBUS-DP field bus on float glass line .
论述了基于SJA1000的CAN总线的硬件接口电路的设计、芯片的选择、软件设计及CAN通信的实现。
The design of CAN bus hardware interface circuit based on SJA1000, the selection of chips, the design of software and the realization of CAN communication are expatiated.
先进的US B端口监视器是一个软件工具，分析了USB总线，USB设备和协议。有了这个程序，你可以调试和测试usb设备和软件。
Advanced USB Port Monitor is a software tool that analyzes the USB Bus, USB device and protocol. With this app you can debug and test USB devices and software.
对CAN总线节点通讯卡的硬件组成，软件流程做了较详细的说明。
The hardware composition and software flowchart of the CANbus node communication card are described in detail.
软件设计主要包括以下功能模块：接收总线数据、控制EMPC、监控电力汇流条、传送汇流条控制器状态等。
The software includes the following function modules: bus data receive, EMPC control, electrical bus monitor, status data transmission and so on.
随着以太网技术在工业控制领域中的应用，基于工业以太网和现场总线的监控组态软件越来越显得重要。
With the application of Ethernet in the industrial area of control, configuration software of monitor based on Ethernet and field bus is becoming more and more important.
CAN总线控制系统的组态软件研究，值得一读。
CAN bus control system configuration software research, it is worth reading.
重点介绍了通过软件设计由FPGA来实现PC104总线数据传输控制；
This paper emphasizes on using FPGA realizing the data transmission control of PC104 bus through the soft-ware.
详细介绍了具有USB接口的MVB总线适配器的硬件原理及软件编程方法。
It is detailed the hardware principle and software programming method of the MVB bus adaptor with USB interface.
结合合成氨厂实践情况，从硬件、软件的角度介绍现场总线控制系统FCS的组成、优点及目前存在的不足。
The paler amply introduces composing and advantages, and currently disadvantages of field- bus control system FCS from hardware, and software and application in the plant.
X9241采用二线串行i2c总线与单片机传递数据。其软件由主程序、中断子程序组成。
Data between X9241 and SCM is transmitted with I2C Bus, and the software includes main program and interrupt subprogram.
为便于实现，提出了面向对象的现场总线应用层软件编制模型。
In order to implement easier, software programming model of object-oriented field bus application layer is stated.
本论文基于现场总线技术开发了钻井参数测量的监测软件，将HART、CAN现场总线技术应用于钻井测量系统。
The monitor software based on fieldbus is designed for drilling parameter measurement and it applies the HART and CAN bus to the drilling system.
它在多总线的系统研究，以及软件平台化的和实时性的研究中都有较强的实际意义。
This one can actually contribute to the research for the multi-bus system, and the real-time, platform software.
应用推荐