产生的压力一部分用来使泵机运转，剩下的用来带动涡轮机。
Some of the resulting pressure is used to keep the pumps running. The rest turns a turbine.
机械大厅由两层组成：上一层是发电机和汽轮机，下层是泵和管道。大厅内异常闷热嘈杂。
Machine hall consists of two tiers: on the upper one there are generators and turbines, on the lower - pumps and pipelines. It is quite hot in the hall and rather noisy.
水轮机蓄能泵和水泵涡轮。投标文件。弗兰西斯涡轮机技术规范指南。
Hydraulic turbines, storage pumps, and pump turbines - tendering documents - guidelines for technical specifications for Francis turbines.
水轮机蓄能泵和水泵涡轮。投标文件。水戽式水轮机的技术规范指南。
Hydraulic turbines, storage pumps, and pump turbines - tendering documents - guidelines for technical specifications for pelton turbines.
水轮机蓄能泵和水泵涡轮。投标文件。管状水轮机技术规范指南。
Hydraulic turbines, storage pumps, and pump turbines - tendering documents - guidelines for technical specifications for Francis turbines.
水轮机蓄能泵和水泵涡轮。投标文件。管状水轮机技术规范指南。
Hydraulic turbines, storage pumps, and pump turbines - tendering documents - guidelines for technical specifications for tubular turbines.
水轮机蓄能泵和水泵涡轮。投标文件。水戽式水轮机的技术规范指南。
Hydraulic turbines, storage pumps, and pump turbines - tendering documents - general and annexes.
然后，以国产引进型300MW汽轮机凝汽器为例，计算汽轮机负荷及冷却水温度对水环真空泵汽蚀余量的影响。
Then taking the domestic 300MW steam turbine condenser as example, the effect of steam turbine load and cooling water temperature on cavitation surplus are calculated.
概要介绍混流式水轮机转轮计算机设计的水力设计方法，其一般原理同样适用于离心泵和混流泵叶轮的设计。
A brief presentation on computer aided hydraulic design of Francis Turbine runners is given, the general principle of which are also applicable to centrifugal and mixed flow pump runners.
对于三缸低波动往复泵，理论上应使三个活塞在排出行程（吸入行程）中的速度之和为一常数，采用凸轮机构能达到这一目的。
Theoretically the sum of the velocities of the three pistons on the discharge stroke in a low-fluctuation triplex pump should be a constant, and this can be achieved by means of the cam mechanism.
为避免互逆活塞式砂浆泵在运动过程中出现的“刚性冲击”，对凸轮机构进行了修正设计，并分析了修正凸轮机构的运动特性。
For the avoidance of rigidity impact of commutative piston mortar pump in movement, the amendatory CAM mechanism was designed, and the characteristic of movements was analyzed.
给水泵汽轮机模型采用TUPWR算法，给水泵系统采用SFPUMP算法，最小流量阀采用SOVLV算法，泵出口流量的关系采用压力节点进行计算。
TUPWR algorithm was adopted for the pump turbine model, SFPUMP for feed pump system, SOVLV for minimal flow valve, and pressure node for calculating the discharge rate of the pump.
应用可编程控制器技术，根据轮机模拟器图解板上的各阀、泵以及主机耗油量的大小，对流动光带进行了有效的动态显示。
According to the consumed amount of oil of the valve and pump as well as the main engine, the dynamic pipe system is designed with PLC in this paper.
利用这一特性，把两个万向节机构和圆柱齿轮机构组合形成了叶片差速泵的驱动系统。
By using the characteristics, the combination of two Hooke's joints with cylindrical gear mechanisms forms the driving system of a differential velocity vane pump.
此外，公司的辅助蒸汽轮机用于主要的给水泵、辅助给水泵、循环泵、消防泵和备用油泵。
Additionally, the company's auxiliary steam turbine drivers are used for main feed pumps, auxiliary feed pumps, circulating pumps, fire pumps and standby oil pumps.
另一种是为气压泵设计的机动自动换向机构，该机构是利用渐开线(零度压力角)凸轮机构作为换向机构。
The other is a mechanical automatic reversing mechanism designed for atmospheric pumps, which adopts involute (zero pressure Angle) CAM mechanism as reversing mechanism.
主回凸轮机构在泵送机构中应用广泛。
The main return cam mechanism has been widely applied in the pump transportation mechanism.
针对注聚合物驱油的工艺要求，研制了新型凸轮机构恒流量往复泵。
According to the requirement of the technology, a new type of reciprocating pump with cam-drive mechanism resulting in the constant flow was designed.
应用在：船用螺旋桨，涡轮机部分，承载，阀门，筛子，泵，管道系统，仪器工程以及货柜。
Applications: ship propellers, parts for turbines, bearing, valves, sifter, pumps, pipe systems, apparatus engineering, containers.
针对潮流能水轮机及其能量转换的特点，设计了一种动外壳式海水径向柱塞泵，研究了其静态性能；
In this paper, a radial piston pump with a revolving outer ring is designed for tidal energy conversion and the static characteristics of the prototype are studied.
并且特别适用于大中型排灌泵、矿用泵、杂质泵及水轮机。
It is suitable for large and medium size water pumps, mine pumps, waste pumps and turbines.
从泵的出口，水流通过上游水箱(在轴流式水轮机这边)、模型机、下游水箱返回泵的进口。
Starting from the outlet of the pump, the water runs through the upstream tank (on the Kaplan side), the model, the downstream tank and back to the inlet of the pump.
汽轮机被广泛应用于人民生产、生活的许多方面，主要用作发电用的原动机，也可直接驱动各种泵、风机、压缩机和船舶螺旋桨等。
Turbine is widely used in production and many aspects of life, mainly for prime mover of power generation; it can also directly drive pumps, fans, compressors and other ship propeller.
供给水轮机模型试验的水泵由一个卧式离心泵组成，由一个整流器自控制的变速电机带动。
The pumping unit supplying the tested models consists in one horizontal shaft centrifugal pump driven by a variable speed D. C. motor itself controlled by a thyristor speed drive.
该泵为汽轮机驱动，用来将水从凝结水箱(或除氧器存水箱)输送到蒸汽发生器。
This is the turbine driven pump for sending water from the condensate tank (or the deaerator storage tank) to the steam generator.
该泵为汽轮机驱动，用来将水从凝结水箱(或除氧器存水箱)输送到蒸汽发生器。
This is the turbine driven pump for sending water from the condensate tank (or the deaerator storage tank) to the steam generator.
应用推荐