通过对装置进行试验，分析了压力、温度、流量等因素对膜分离和变压吸附制得氧气纯度的影响，为装置的进一步改进提供了依据。
Trial use of the device helps analyze such factors as pressure, temperature, and discharge that will affect the purity of the oxygen, and provides proof of improvement.
然而，混合动力汽车性能，特别是动力性和经济性的评价与改进，不但需要理论仿真，更需要大量的试验分析。
However, evaluating and improving HEV performances, especially dynamic and economical performance, not only needs theoretic simulation but also needs vast test datum analyzing.
对醇酸树脂合成方法及影响因素进行了试验和分析，确定了改进合成工艺条件、提高醇酸树脂质量的方法。
Some experiments are made so as to change the process parameters for processing alkyd resin and then, to improve the quality of the resin.
通过计算和试验，对铁路货车提速转向架组合式制动梁缓解不良问题进行了分析，提出了影响因素和改进方案。
The bad release of the composite brake beam in speed increased bogies for railway freight cars is analyzed through calculation and test.
用数理统计方法改进了邻菲啰啉分光光度法测定铁的条件试验和标准曲线，有效地提高了分析结果的准确性。
The conditional test to measure iron by means of O-phenanthroline spectrophotometry and the standard curve are improved with mathematical statistics.
文章介绍了双重密封的结构和原理，通过充水试验检验双重密封的各项性能，对出现的问题进行了分析，并提出了改进方法。
This paper illustrates the structure and principle of double seals, analyzes the problems found in water filled test, and brings forward the improvement method.
通过对通讯车辆噪声和振动特性的分析，介绍了在该车上进行的振动和噪声改进对比试验的试验方法及试验原理；
Through an analysis of noise and vibration characteristics, an experimental principle and method is introduced to eliminate the noise and vibration in communication automobiles.
介绍了国内木材防腐油的生产现状，对木材防腐油行业标准的主要指标及试验方法的修改进行了阐述，并进行了综合分析和述评。
Introduce the production of wood preservation oil in our country, describe the revision about the main index and experiment method of wood preservation oil trade standard and analysis them.
本文介绍了CL7铲运机变速器蝶形弹簧失效原因的分析和台架疲劳寿命试验研究，提出了提高蝶簧疲劳寿命的改进措施。
Failure diagnosis of disc spring in transmission of scraper Model CL7 and bench life test for its fatigue life are introduced. Improvement measures in increasing its fatigue life are proposed.
在结合声学试验分析和该车车顶棚、前风挡有限元模态分析的基础上，进行了针对降低车内噪声的改进设计。
Together with the FEM modal analysis of the car's roof panel and windscreen, an improved design is achieved to reduce the interior noise.
本文对ZD6电动转辙机在振动试验中出现的底壳多处断裂进行了分析和研究，并提出了改进措施。
The paper makes an analysis and study on the cracks found with the bottom case of ZD6-E electric point machine in the vibration test and gives suggestion on the improvement.
通过分析其形成原因和现场改进试验，有效地解决了拉伤问题，使连铸型材表面质量得到了有效的保证。
The pull damage of the dense bars surface was solved effectively by analyzing the cause of it and amelioration test on the spot. Finally, the product quality was ensured effectively.
通过分析4105柴油机一度存在的曲轴箱通风不畅和机油消耗高的情况，提出了新的改进方案，经过试验验证，效果良好，并已在生产上应用。
A plan is proposed for improving crankcase ventilation and oil consumption of 4105 diesel engine. Verification test proved that the plan is effective and has been applied in mass production.
大量的性能试验、排放试验和燃烧分析的结果表明，改进后的燃烧系统良好地兼顾了柴油机的动力性、经济性和排放特性。
By a lot of performance tests, emission tests and combustion analysis tests, it has been proved that the new combustion system can give a good attention to power, economy, and emission capability.
分析和试验的结果表明，用改进后的软件控制随机加载的疲劳试验，可节省35%的试验机时。
The results of analysis and test show that testing time could be shortened 35% with the improved software GAUSS for controlling the MTS system during random-loading fatigue test.
对彩虹荧光粉厂原废水处理方案进行了分析，通过化学方法和生化法对其进行了改进试验，得出了非常满意的处理效果。
We analysed an old wastewater treatment process of a phosphor factory, and tested biochemical treatment and chemical treatment. At last, we obtained some efficient results.
实验中采用了正交试验设计和回归分析方法。结果表明，充填尾砂中细粒级含量有可能进一步提高，增加充填尾砂的利用率，充填体性质也有所改进。
The experimental data indicated that it is possible to increase the fines content in the fill, thus utilization coefficient of tailings is raised and properties of fill will be improved.
针对太原二电厂空冷散热器泄漏情况进行了试验分析，得出了初步结论和改进建议。
Primary conclusions and improving proposal are presented according to the analysis on the leakage phenomenos of air cooling radiators in Taiyuan NO 2 Power Plant.
介绍了边柱节点模型试验的试件设计及试验现象和破坏过程，分析了新型节点存在的问题及改进的思路。
The design of the member and experiment, phenomenon of the experiment and process of failure are introduced. The author analyzes the existing problems and the improving idea of the new type of joint.
根据试验结果又进行了分析讨论，借以对进一步提高质量、改进工艺和大批生产提供工艺条件和参考依据。
On the basis of the results obtained, the authors further dis-cussed the results in order to fulfill the requirements of improving quality and mass production.
结合台架试验和疲劳寿命预测对变速器悬置支架疲劳寿命进行分析以验证改进方案的有效性和可靠性。
Finally, both the rig test and fatigue life prediction are carried out to validate the effectiveness and reliability of optimized design of transmission mount bracket.
通过对试验获得数据的分析，也发现了系统设计中存在的问题和不足，提出了改进意见和今后努力的方向。
Through analysis of the data, we found the problems of the system, propose the Suggestions to improve the system.
分析并应用了关风提前量计算和关风提前量计算方法中的参数的自校正方法。本文最后叙述了现场试验中遇到的问题和系统需要改进的地方。
This paper introduces the method to calculate the advance to close the solenoid valve and the adjusted method to adjust the parameter in the method to calculate the advance.
对GIS现场耐压各种方法和相应的试验装置特点进行较全面的分析，并提出改进的建议。
Various methods for withstand voltage in site and the performance of corresponding testing devices are fully analyzed and some proposals for improvement finally presented.
最后针对模态分析和优化结果对车架结构进行了改进改进后的整车平顺性道路试验表明摩托车的振动舒适性得到改善。
Based on the results of modal analysis and optimization, some modifications to the frame are accomplished. The road test results show that the ride comfort of the motorcycle is improved.
本文作者分析并介绍了该机的改进措施和试验结果。
This article is focused on the introduction and analysis of its improved measures and e...
根据试验结果和分析研究，提出了异型杜瓦容器内部绝热结构的改进设计。
According to the test results and the analyses, the modified design has been proposed for the inside insulation structure of LHe dewar.
结合台架试验和疲劳寿命预测对变速器悬置支架疲劳寿命进行分析以验证改进方案的有效性和可靠性。
Finally, both the rig test and fatigue life prediction are carried out to validate the effectiveness and reliability of optimized design of transmission mount...
结合台架试验和疲劳寿命预测对变速器悬置支架疲劳寿命进行分析以验证改进方案的有效性和可靠性。
Finally, both the rig test and fatigue life prediction are carried out to validate the effectiveness and reliability of optimized design of transmission mount...
应用推荐