研究结果表明,高阶快速多极边界元法易于分析此类大规模问题,并具有很高的数值计算精度,满足工程设计的要求。
The results show that the higher-order, fast multipole boundary element method can be applied to large problems with high numerical accuracy for engineering designs.
设计师夏洛特·迪克曼(CharlotteDieckmann)和尼尔斯·法伯(NilsFerber)做出了一份贴心的设计,用以解决日益增长的社会城市化导致的健康食品供应问题。
Designers Charlotte Dieckmann and Nils Ferber have tackled a topic dear to our hearts– the problem of providing healthy food to an increasingly urbanized society.
然后采用最佳矢量法求解结构体系可靠度指标约束下的最小重量优化设计问题。
Secondly, the problem of the minimum weight design is resolved by using the optimum vector algorithm under the constraint of the structure system reliability.
本系统采用E -R图法进行规范化设计使得数据冗余最小,数据一致性好,更新异常问题不易发生。
This system used E-R chart method to design in order to minimum data redundancy and optimize data consistency and reduce updating abnormity.
利用平均能量法对非线性系统在随机激励下的缓冲设计问题进行了分析研究。
The cushioning design problems of a non - linear system under random excitations are studied by means of the average energy method.
同样在有限元法中,计算机辅助几何设计中以及趋势面分析等问题中,都被提了出来。
These problems are proposed in the finite element method, in the auxiliary geometrical design of computors and in the analysis of tendency surface.
分析了中频积累法的基本原理以及环路设计中的若干问题。
Fundamental principles of IFRSL and some problems in the loop design are described.
使用目前常用的算符优先法,对通用表达式计算过程进行了介绍,并对其中的关键问题——运算符优先矩阵的设计和实现进行了研究。
Using the current commonly used operator priority method, introduces a common expression of the calculation process, and one of the key issues, operator precedence matrix design and implementation.
最后,本文提出了无芯法连续生产空心钢锭技术需要解决的问题,以及在选定凝固材料和进行锭型设计时的参考意见。
At the end, the paper posted the problems which needed to be solved in non-sleeve technique, and also provided Suggestions in selecting the solidification materials and designing mould.
潘洛铁矿属中型生产规模铁矿山,原设计分条分段崩落法在生产中存在较多问题。
Panluo Iron Mine is of medium size and there are many problems in its production which USES the originally designed sublevel caving in strips.
从实用的观点叙述了有关海洋平台可靠性设计的主要问题,及采用可靠性安全系数法的主要步骤。
From the application point of view, this article describes the main problems in relation to the reliability design of offshore platform and the principal steps to adopt the safety coefficient method.
针对常规滑模变结构控制方法在电磁轴承控制当中引起的抖动问题,将边界层法用于滑模变结构控制器的设计。
This strategy combines the fuzzy logics with the method of sliding mode control, thus can reduce the chattering without decreasing the robustness of system.
本文给出了基于有限面积法的跨音速透平叶栅速度面反问题设计方法。
This paper deals with the inverse design problem of transonic turbine cascade in the hodograph plane by the finite area method.
常规的钻探机械零件设计方法即安全系数法并不能回答其产品的安全性问题。
The ordinary design method for drilling machine parts-safe coefficient method can not ensure the safety of the product.
通过设计研究采用碎石振冲桩法及在子坝前设置合理的干滩长度得以解决这些问题。
Through research, the problem was solved by adopting gravel pile method and setting reasonable dry beach length in front of the retaining dam.
据调查,当前矿井设计过程中,遇到该类求解问题时,多是通过作图法粗略求解。
According to the investigation, during the current mine designing, when meet such problems mostly solve it by the method of making diagram.
这种静力分析法对于处理机器人手的抓取操作规划与优化以及力控制设计等问题提供了理论基础。
This kind of static force analysis method provided a theoretical foundation for handling the problems of planning and optimizing grab operation and the design of force control of robot hand.
探讨了有限单元法应用于重力坝设计及坝踵等应力奇异区域的应力控制标准问题。
The stress singularity in the heel region of gravity DAMS is discussed in order to apply finite dement method directly to dam design.
针对地下巷道工程稳定性问题,基于岩石工程系统(RES)理论,提出了全耦合分析法及优化设计思想。
Based on rock engineering system (RES) theory, a full coupling analysis method and optimization design idea for the stability problem of underground roadway engineering are put forward.
设计了求解车辆路径问题一种新的整数编码方案,并采用罚函数法处理约束条件。
A new integer-code method is adopted for the vehicle routing problem, and strained terms in VRP are processed by the penalty function.
利用转化机架法,将按预定连架杆构件位置的四杆机构设计问题,转化为按预定连杆位置设计四杆机构问题。
In this paper, an analytic method to design the plane four-bar linkage mechanism according to three predetermined locations of framed link is introduced.
针对常规滑模变结构控制方法在电磁轴承控制当中引起的抖动问题,将边界层法用于滑模变结构控制器的设计。
To solve the chattering problem caused by general Sliding Mode control in active magnetic bearings control, a Boundary Layer Approach was used in the controller design.
计算结果表明,正交试验设计法可以解决一般遗传算法中的最小欺骗问题。
It is shown that the orthogonal experimental design method can overcome minimum deception problems existing in genetic al.
用能量法求冲击应力和冲击变形。并将应力强度干涉模型运用于冲击问题,讨论了冲击的可靠性设计。
Impact stress and impact strain are solved by energy method. Stress - strength interference model can be used to impact investigation. Reliability design of impact has been studied.
运用调查法、系统设计法和教学实验法对体育院校篮球智能教学系统的设计与运用问题进行了研究。
With investigation, systematic design and teaching experiment, the authors studied the design and application of basketball intelligent computer aided teaching system of institutes of P. e.
用解析法设计函数生成机构,要解决的关键问题是两连架杆位置方程式的求解。
The key problem to be solved in establishing function resultant mechanism by analytic method is to calculate the equation of two connected rod clevis.
本文中提出了一种基于两位置综合问题的图形设计方法——摇杆极位法。
In this thesis, a graphical design method named Rocker Limits method for two prescribed positions synthesis problem is developed.
论述了采用正交设计法设计槽型的问题。
That grooves are designed through orthogonal method is elaborated on.
结果表明:SUMT法收敛快、精度高,是求解机械优化设计问题的高效算法。
The studies show that SUMT is practicable and reliable in machine optimal design.
结果表明:SUMT法收敛快、精度高,是求解机械优化设计问题的高效算法。
The studies show that SUMT is practicable and reliable in machine optimal design.
应用推荐