该实验台的研制为飞机人机界面的工效设计和评定提供了一种新的方法。
The experiment table also provides a new approach for the human-machine interface design and ergonomics assessment.
在液压实验台的改进设计中采用自动控制技术是液压技术和测控自动化技术相互交叉的必然结果。
It is the consequence of development in the hydraulic and automatic to use autocontrol technology in the modifying design of hydraulic experimental table.
所设计的变工况机械密封实验台是一套模拟机械密封工作状况的实验设备，能够模拟密封各种正常工况及变工况工作情况。
The mechanical seal experimental unit of change-resisting work condition was a experimental equipment which can adjust temperature and pressure and operate in all kinds of work conditions.
本文介绍了“积木式”的中庭建筑火灾模型实验台的设计和制作。
This paper introduced the designing and manufacturing of building block form experimental model for atrium buildings fire.
实验台的设计是完全模拟火电厂空冷散热器并通过具体计算进行的。
This design for the air cooled experimental platform completely simulates air cooled heat exchangers in power plant by concrete calculation.
设计了发动机实验台pid测控系统的电路，确定了各元件的参数。
PID measuring and controlling system circuits of engine test-bed was designed and the parameters of each element were determined.
为研究汽车发动机电控系统的故障诊断，设计制作了丰田5a -FE型电控发动机仿真实验台。
A simulation experimental platform for Toyota 5a-fe electronically controlled engine is designed to study the failure diagnosis of the electronically controlled system of the engine.
通过对平面驻波声场的理论分析，设计并建立了燃煤可吸入颗粒物声波团聚清除特性的实验台。
Through a theoretical analysis of a plane standing-wave sonic field a test rig on acoustic agglomeration and removal characteristics of burned coal inhalable particles has been designed and set up.
本论文结合课题需要，对实验台的设计和测试技术进行研究，以便为下一步工作打好基础。
The paper combines with the issue needs and proceeds research for technology of designing and testing in order to lay foundation for the next step.
本文详细介绍直升机旋翼实验台实时监视报警系统的功能，硬件配置以及软件设计方法。
This paper mainly introduces the function, the hardware and software of the monitoring system of the helicopter rotor testing device.
介绍了NISSAN千里马轿车故障诊断实验台与软件的设计思想、结构和特点。
This paper describes the design idea, structure and characteristics of the fault diagnosis test-bed and software on NISSAN MAXIMA car.
自行设计和搭建了数字全息干涉法流体质扩散系数测量实验台。
An experimental system based on digital image holographic interferometry and a novel diffusion cell are designed and constructed for the measurement of mass diffusion coefficients.
根据翼帆空气动力学特性和受力分析结果，设计并搭建翼帆回转液压实验台。
According to the aerodynamic characteristics and force analysis of the wing-sail, a slewing hydraulic experimental table is designed and established.
结合液压传动实验台，通过实操的方式参与到液压传动回路设计和仿真的整个过程，激发学生的学习兴趣，提高学习效果。
Students use this software to design and to simulate fluid drive circuit, which will greatly inspire their learning interests and improve their learning effects.
针对带式输送机输送带接头的强度以及寿命测试的需要，设计了橡胶带疲劳性能测试实验台。
According to the need of strength and life test for the conveying belt junction from belt conveyor. Design this experiment platform for the weary performance test of the rubber belt.
为设计的实验台和进行实验奠定良好的基础。
根据实验台的技术要求，设计了整个驱动系统方案。
硬件部分设计滚动轴承实验台，采用高性能的数据采集卡实时采集数据。
In the part of hardware, an experiment table of rolling bearing is designed and a high performance data acquisition card is used to acquire data at real time.
本文实验台参照360MW机组湿法脱硫浆池尺寸按1：20的比例设计的模拟浆池进行了实验研究。
According to the real 360mw WFGD slurry pond, an experimental slurry pond model with scale 1:20 was designed and built.
文章详细阐述了低速翼型升阻特性实验台的设计过程，分析了自制翼型的风洞实验结果。
The design process of the test-bed of the low speed airfoil lift-drag force characteristic was introduced, and the experimental results of the airfoil were analyzed.
并且提出了相应测试实验台的设计方案。
And relevant designing scheme of test experimental bed was advanced as well.
详细介绍了涡流管实验台的设计和搭建过程，实验台包括供气系统和主机两个部分。
The process of designing and building of vortex tube experimental system is introduced in detail. The experimental system includes air feed system and mainframe.
经试验，验证了已有实验台设计的合理性，包括验证混合磁铁设计、四象限斩波器设计和控制电路设计的合理性。
The experiment result proves rationality of the experiment console that has been designed, including blending magnetic iron, IV quadrant chopper.
本文主要是设计收获机谷物流量传感器实验台。
This article is designed for Harvester grain flow sensor test-bed.
运转试验及性能考核表明，双级轴流压气机实验台在机械性能和气动性能两个方面均达到了预定的设计要求。
Experiment results indicate that the mechanical and aerodynamical performances on the new two-stage axial-flow compressor have met the design requirements.
在8 2B型计算机实验台设计制作出一套计算机时标实验系统，包括四相节拍电平及两相工作脉冲，利用此时标系统可组合出计算机所需要的各种时序信。
Design and make a set of computer time scale experiment system on 82B Lab desk, include four phase time eletronic level and two phase working pulse.
为此，我们提出了建立空冷实验室的设想，并已完成空冷实验台的设计和计算。
Therefore, the plan is presented that an air cooled laboratory is setup and has been carried out the design and calculation.
本文从采场风流流动及瓦斯运移数学模型导出模型实验的相似准则，指导实验台设计。
Based on a mathematical model of air flow and gas migration in working face, the similitude criteria for model test has been deduced, on which the test bench design depends.
分析了实验台的控制原理，并以此为基础完成了伺服驱动与数控系统接口单元的PCB原理图设计。
Control principle of the platform is analyzed, on the basis of which, PCB drawing of interface unit between servo-driver and CNC system is designed.
本文利用自主设计的大空间凝结换热实验台，对水平光管和三维肋管管外高不凝性气体含量水蒸气的凝结换热性能进行了实验研究；
In the past decades, little efforts has been done on the investigation of condensation of steam in the presence of high content non-condensable gas due to its complication.
应用推荐