文中给出了对此项改造的主要计算结果及分析。
This paper presents the main calculating results and analysis of the revamp.
计算结果及分析表明它是求解一切特征值反问题的有效方法。
The method, which combines the advantages of artificial neural network and genetic algorithm, is an universal one of solving inverse eigenvalue problem.
本文介绍了CPWR640反应堆的核设计准则、堆芯特性与主要参数，并给出了堆芯核设计的主要计算机程序、计算结果及分析。
The paper presents the nuclear design criterion, reactor core characteristics and main parameters, and shows some computer codes, calculation results and analyses.
该结果使得研究员们能够将计算结果与阿波罗号带回的月岩及非洲的月球陨石的分析相比较。
For this new study, the researchers were able to compare their calculations to analyses of samples of Apollo moon rocks and a lunar meteorite from Africa.
将所得实验结果与国外实验结果及理论计算结果进行了对比与分析，实验结果与资料值有较好的一致性。
Finally, the analysis and comparisons with other experiments and theory calculation are presented, the results indicate that our experimental results have better compatibility with documents.
计算结果为分析火炮身管传热过程及发射装药安全性提供参考。
The calculation results can provide reference for heat transfer process analysis of gun barrel and safety of propellant charge.
根据分析重力传递误差的形成及计算结果，解决了设计、工艺、使用、维修等技术问题。
On the basis of the analysis of the error of gravity transmission and computing results, the technical problems of design, process, operation and maintenance etc. have been solved.
介绍了钢结构在住宅公寓中的应用，包括结构体系的选择、计算结果的分析及材料和构造要求。
This thesis depicts the use of steel structure in high-rise apartment building, including the selection of structure system, analysis of calculation outcome, material and construction requirement.
推导了斜筋斗计算公式，并计算分析了其速度、高度特性，及轨迹平面倾斜角、过载对斜筋斗的影响，计算结果与理论分析一致。
Its dynamic characteristics involved with speed and altitude, the influence of the inclined Angle of the trajectory plane and load on it are also calculated and analyzed in this paper.
本文对考虑容积吸收及对流换热的影响后双曲型热传导方程的计算结果进行了分析。
This paper analyzes the calculation results of the hyperbolic heat conduction formula with considering volume absorption and convection heat transfer.
计算结果的处理与分析及与实验结果的比较分析。
Calculation result was treated and compared with experimental result, and conclusion was analyzed.
最后，根据计算结果提出了在机体设计及结构分析中应注意的几个问题。
Finally, some problems that should be taken care of in the design and structural analysis for engine blocks are pointed out according to calculation results.
计算结果可以较好地与经典的理论解及试验结果相吻合，为加劲环式压力钢管局部稳定性问题分析提供了一种新的可行方法。
The calculated results accord with the classical theoretical and experimental solution, therefore, the method provides a new and feasible way for local stability analysis of stiffener penstocks.
由试验分析和计算结果进一步验证了试验路基边坡的稳定性及可靠性计算方法的准确性。
The test analysis and calculation results further proved the exactness of the reliability calculation method and the stability of the roadbed slope in test section.
在此基础上，建立了煤炭地下气化干燥、热解及气-煤焦反应的多阶段数学模型，并对计算结果进行了分析与讨论。
On the basis of it, the multi stage mathematical model of the drying, pyrolysis and gas coal coke reaction in the UCG was established, and the calculation results were analysed and discussed.
通过实例分析了软化及不同强度模型对计算结果的影响。
Through instances, the influences of softening and different strength models on the results were analyzed.
本文对计算结果进行分析，并按第三强度理论进行应力组合及寿命评估。
Calculation result is analyzed in this paper. Composition of stress and estimation of lifetime are done according to the third strength theory.
程序运行表明，计算结果满足该系统对天然气流动状态及计量误差分析的要求。
The result of program operation shows the calculating result satisfies the requirements of natural gas flow state and measurement error analysis to the system.
对有限元计算结果进行分析，了解托轮的力学行为，从而实用于回转窑托轮的设计及调整。
According to the analyzing of finite element computing results, the mechanics action of supporter is obtained, which is the bases for designing and adjusting of rotary kiln.
根据模拟计算结果，对伶洋流场的平面及空间结构特征进行了分析。
In terms of the computed results, the characteristics of plane and space structure of LDY flow field are analysed.
根据管网水力计算结果分析及水质监测点布置原则，在管网中建立了包括二次供水水箱在内的6个水质监测点。
According to the water power result and the disposal principle of water quality monitoring point, this paper sets up 6 points, including the second-supply water tank.
从计算结果中提取应力应变云图显示了工件及刀具的应力应变分布情况，以此对切削过程中应力应变的变化进行了分析。
The images from result show the distribution of stress and strain and supply basis for the analysis to the change of stress and strain.
通过对身管自紧的残余应力、残余应变及残余位移分析，证明其计算结果与实验结果相当吻合。
It is proved that the computed results are in agreement with the experimental results by analysing the residual stress, strain and displacement of gun autofrettage.
从结构整体计算及推覆分析等方面进行了结构抗震计算，计算结果表明该结构整体计算指标满足规范要求。
It is calculated the structure on the static and Pushover analysis, the structural master ratio meets the requirement of the code.
对大量仿真计算结果进行统计分析，可以得到总工期及关键路线的概率分布结果，为施工管理提供更多的信息。
After enough turns of simulation, the distribution of the total work period can be determined, at the same time the critical path can be found in the probability concept.
对实例计算结果的分析表明，半主动控制下的滑移隔震结构不但具有较好的隔震效果，而且能有效地减小基底的最大滑移量及残馀位移。
Numerical results show that the sliding structure using semi-active control not only has good vibration isolation effect, but also has less maximum slippage and less residual base displacement.
提出了流量限的概念，并应用于燃气管网计算及计算结果分析中，使其更加精确和简便。
This paper suggests the concept of the flow limit which can be applied in calculation and analyses of calculation result of gas networks to make the calculation and analyses easier and more accurate.
依据数值计算结果对端部锚固及全长锚固锚杆的轴向作用力的分布特征进行了分析，指出了拉拔试验锚杆与支护中的锚杆以及端锚锚杆与全锚锚杆的区别。
According to the numerical analysis results, the axial force distribution of bolt have been studied, the differences between bolt for pull test and for supporting have been pointed out.
依据数值计算结果对端部锚固及全长锚固锚杆的轴向作用力的分布特征进行了分析，指出了拉拔试验锚杆与支护中的锚杆以及端锚锚杆与全锚锚杆的区别。
According to the numerical analysis results, the axial force distribution of bolt have been studied, the differences between bolt for pull test and for supporting have been pointed out.
应用推荐