金铝圈表面氧化处理。
该复合材料的制备方法，其步骤如下：1）炭黑表面氧化处理；
The preparation method comprises the following steps of: 1) oxidizing the surface of the carbon black;
通过该方法，能够有效且充分地洗掉附着在实施表面氧化处理的热镀锌钢板的表面的酸性溶液。
By this method, an acidic solution adhered to the surface of the hot-dip galvanized steel sheet after the surface oxidation treatment can be efficiently and sufficiently washed out.
本文通过理论分析，结合实验室研究与现场生产，对YL112铝合金材料表面氧化处理工艺进行了研究。
In this thesis, by combining laboratory research, field production and theoretical analyze we have studied superficial oxide treatment technology to YL112 aluminum alloy material.
经过表面氧化处理的加热块清洁美观，使用寿命更长，可根据要求定制不同孔径和数量模块，满足使用者需求。
Anodized aluminum heating blocks are clean and beautiful, extending using life. We can offer different size holes of the block according the demand.
针对热作模具钢的表面氧化处理，本文开发了一种带蒸汽预热装置的氧化处理炉，这种炉型现已应用于工业生产。
A furnace with preheating equipment for water vapor is developed for surface oxidation treatment of hot work dies. This type furnace is successfully used in industry.
移动工作台表面采用氧化处理，美观耐用。
Movable table surface oxidation treatment, beautiful and durable.
此系列LED用于室内室外照明，灯体采用高质量铝材，表面阳极氧化处理。
This series LED is used for indoor and outdoor lighting, the light body using high quality aluminum, surface anodic oxidation process.
结果表明：空气氧化处理碳纤维表面形成微孔和刻蚀沟槽，容易形成应力集中，复合材料的强度不高；
Gas-phase oxidation treatment resulted in distrihution of some micro-pores and ditches at the carbon fiber surface and led to stress concentration therefore, the composite strength was not high.
本文用正交设计法研究了臭氧气体对炭纤维表面的连续氧化处理的最佳工艺参数。
In this paper was studied optimum technology parameter of the oxidation treatment in succession of the ozone gas against the surface of carbon fibers with the method of rhombic design.
色素炭黑通过氧化处理，改善其表面性能，拓宽应用领域。
The colour black is treated via oxidation to improve its surface properties and expand its applications.
表面进行阳极氧化处理，大大提高了硬度和耐腐蚀性。
The surface is treated by anticathode oxidation which greatly improves the rigidity and anti-corrosion.
而空气氧化处理则会导致活性炭的中孔面积和孔容显著增大，但对表面含氧基团的影响较小。
Air oxidation treatment leads to a remarkable increase in the surface area and mesopore volume of ac samples but little change in the quantity of surface oxygen groups.
金属的表面喷涂，抛光拉丝，电镀，氧化处理。
Spray the surface of metal, drawing polishing, electroplating, the oxidation process.
产品说明：材料：外壳采用优质铝材挤压成型，表面经磨砂氧化处理。具有高漫反射效率的特点。
Material: the outer covering USES the high quality aluminum material extrusion formation, Surface after frosting oxidized. Has the high diffuse reflection efficiency characteristic.
目的分析烤瓷用镍铬合金在上瓷前进行阳极钝化处理对其表面氧化膜的形貌、厚度及主要金属元素氧化程度的影响。
Objective To study the shape, thickness and oxide percentage of major metal element of oxide film on Ni-Cr porcelain alloy after anodizing pretreatment.
利用X射线光电子能谱对酸氧化及酰氯化处理后的样品进行了表面化学性质分析。
X-ray photoelectron spectroscopy was employed to analyze the surface chemical properties of specimens of acid treatment and acylation reaction.
经x射线衍射分析，纯钛表面经阳极氧化处理后，其表面生成了一层非晶态的氧化钛薄膜，并且钛晶体的各个表面沿不同结晶方向的腐蚀速率不相同。
XRD results indicate that amorphous titanium oxide film is formed on the surface after anodic oxidation, and corrosion rates of titanium crystal vary along different crystalline orientation.
微弧氧化是一种新兴的金属材料表面陶瓷化处理技术。
Microarc oxidation is a newly developed technology for the formation of ceramic coatings on metal surface such as aluminum, magnesium and titanium.
表面自由能的极性分量因氧化处理而增大。
The fraction of polarity part of surface free energy is increased by oxidization.
防钻、防橇的面板设计， 面板表面处理经加强型防氧化处理；
Drilling-resistant and prying-resistant panel design: The surface of the panel has undergone enhanced anti-oxidation treatment;
挤压铝合金缸体或铸钢。表面进行阳极氧化处理，大大提高了硬度和耐腐蚀性。
Extruded aluminum alloy cylinder body or cast steel, the surface is treated by anticathode oxidation which greatly improves the rigidity and anti-corrosion.
用渗铝-内氧化技术对纯铜进行了表面弥散硬化处理。
The al concentration distribution in aluminized layer, microstructure and some properties of surface hardening layer were studied.
由于脊波导脊的重合性对校准件与测试端面连接处的反射具有较大影响，对校准件采用精确定位和表面抗氧化处理。
Accurate alignment and surface anti-oxidation processing were applied to the calibration kit to reduce the influence of ridge mismatch.
研究表明氧化处理后活性炭的比表面积和孔容虽有减小，但炭表面的含氧官能团数量大幅增加，其中羟基的增幅最明显。
The results showed that after modification, the specific area and pore volume of ACs decreased while the content of oxygen functional groups, especially which of hydroxyl, increased obviously.
此外，运用TETA对尾矿进行表面钝化处理，研究钝化前后尾矿抗化学氧化和生物氧化的能力。
In addition, through using TETA to passivate the tailing surface, the capability of its anti-chemical oxidation and anti-biological oxidation both before and after passivating was studied.
表面聚酯粉末烤漆及氧化处理。
表面聚酯粉末烤漆及氧化处理。
应用推荐