所有虚拟适配器映射和SEA都是可用的。
如果您回想一下,您以前应该尝试过更改使用虚拟以太网配置的适配器。
If you recall, you tried to change an adapter earlier that was configured with virtual Ethernet.
我还用这些新创建的虚拟适配器更新了VIOS和lpar分区概要文件(在hmc上)。
I also ensure that we update the VIOS and LPAR partition profile (on the HMC) with these newly created virtual adapters.
这些组件包括您的网络适配器、您的交换机和路由器,以及您在宿主逻辑分区中使用虚拟化的方式。
These components include your network adapters, your switches and routers, and how you are using virtualization on your host logical partitions.
但这需要至少有一个分区既拥有物理以太网适配器,又拥有连接到其他分区的虚拟以太网适配器。
That requires that at least one partition have both a physical Ethernet adapter, as well as a virtual Ethernet adapter that is connected to the other partitions.
然后,通过sea映射告诉VIO客户机LPAR应该访问的虚拟以太网适配器和VLAN编号。
Then, the VIO client LPARs are told the virtual Ethernet adapters and VLAN Numbers they should access through an SEA mapping.
必须将每个VIO服务器上的第二个虚拟以太网适配器配置为非干线适配器。
The second virtual Ethernet adapter on each of the VIO Servers must be configured as a non-trunk adapter.
然后,VIO服务器把这些虚拟适配器映射到物理以太网适配器,这些VIO客户机LPAR可以通过相同的设备进行通信。
The VIO servers then map these virtual adapters to physical Ethernet adapters, and those VIO client LPARs can communicate through the same device.
SR - IOV提供了对被多个访客VM使用的物理适配器进行虚拟化的方法。
SR-IOV provides the means to virtualize a physical adapter to be used by multiple guest VMs.
通过修改lpar属性把新的虚拟适配器分配给lpar适配器。
Modify the LPARs properties to map the new virtual adapters to LPAR adapters.
如果您登录到各个管理虚拟映像,用ifconfig命令显示所有已定义的网络适配器。
If you login to each of the management virtual images, the ifconfig command shows all the defined network adapters.
对于我的虚拟网络,我特别地将它绑定到eth0适配器。
For my virtual network, I bound it to the eth0 adapter specifically.
在AIX分区上,可以在虚拟以太网适配器ent0 上创建接口en0(上图中没有显示),可以给它分配一个有效的IP地址。
On the AIX partition, an interface (not shown in the figure above) en0 can be created on top of the Virtual Ethernet adapter ent0 and a valid IP address can be assigned to it.
使用HMC,为每个VIO服务器上的每个LPAR创建一个虚拟scsi服务器适配器。
Using the HMC, create one virtual SCSI server adapter per LPAR on each of the VIO Servers.
为了在IVM上创建多个虚拟适配器,需要了解这个命令的一些重要特性。
There are some important features of the command that you need to know to create multiple virtual adapters on the ivm.
这个分区shell用来保留创建LPAR所需的资源(即处理器权利)、内存配置和虚拟适配器配置。
This shell partition is used to reserve the resources required to create the inbound LPAR, or processor entitlements, memory configuration, and virtual adapter configuration.
虚拟以太网提供了与1Gigabit以太网适配器大致相同的功能。
Virtual Ethernet provides roughly the same function as a 1 Gigabit Ethernet adapter.
使用HMC,在每个使用VIO访问SAN的lpar上创建两个虚拟scs i适配器。
Using the HMC, create two virtual SCSI adapters on each LPAR that use the VIO to access the SAN.
如果执行ifconfig命令,就会看到映射到LPAR的虚拟适配器VLAN。
If you perform an ifconfig command, you will see that the virtual adapter individual VLAN mapped to the LPAR.
port _vlan _ id:这是虚拟适配器的主vlan。
Port_vlan_id: This is the primary vlan for the virtual adapter.
在客户机LPAR上的原始虚拟scs i适配器vscsi0和vscsi1现在也被使用rmdev和DLPAR删除(lpar分区概要文件也进行了更新)。
The original virtual SCSI adapters on the client LPAR, vscsi0 and vscsi1, are also removed now using rmdev and DLPAR (the LPAR partition profile is also updated).
最后,确认AIXLPAR(bxaix85)只配置了虚拟设备(即没有配置物理适配器,这是分区转移的另一个前提条件)。
One last check. Confirm that the AIX LPAR, bxaix85, is configured with only virtual devices (meaning no physical adapters, another prerequisite for mobility).
您还应该在每个VIO服务器上设置第三个虚拟以太网适配器,使用干线适配器的VirtualLANID。
You should also set up a third virtual Ethernet adapter on each VIO Server using the virtual LAN ID of the trunk adapter.
让ISO文件能够在另外一个操作系统上运行需要一个开放源码的PC模拟器,这包括开放源码的BIOS和一个开放源码的虚拟图形适配器(例如QEMU9.7.2)。
Getting the ISO to run under another operating system requires an open source PC emulator, which includes an open source BIOS and an open source virtual graphics adapter (such as QEMU version 0.7.2).
在HMC中配置VIO服务器的概要时,在每个服务器上创建两个虚拟以太网适配器。
When configuring the profiles of the VIO Servers on the HMC, create two virtual Ethernet adapters on each server.
要构造一个屏幕保护程序,最好的方式就是为其配置一个虚拟的光驱、键盘、屏幕和鼠标,但是不需要虚拟磁盘和网络适配器。
To construct a screensaver, the best way is to configure it with a virtual CD-ROM drive, keyboard, screen, and mouse, but without any virtual disks or network adapter.
在两个cec上,虚拟scsi客户机和虚拟scsi服务器适配器映射必须是相同的。
The virtual SCSI client and virtual SCSI server adapter mappings have to be the same on both CECs.
VIO服务器的第二个虚拟以太网适配器的屏幕截图看上去完全相同。
The screen shot of the second virtual Ethernet adapter for the VIO Servers should look the same.
当前的VIOS和LPARfc适配器、DS8300磁盘、虚拟适配器和虚拟磁盘配置均被捕获并用在计划中以便进行新磁盘的分配。
The current VIOS and LPAR FC adapter, DS8300 disk, virtual adapter and virtual disk configuration is also captured and used in the planning for the new disk assignments.
在两个cec上,AIX客户机分区的虚拟以太网和虚拟scsi客户机适配器的槽编号(在分区配置文件中)必须匹配。
The slot Numbers of the virtual Ethernet and virtual SCSI client adapters for the AIX client partition (on the partition profile) must match on both CECs.
应用推荐