设计了自适应控制系统，并用两片8031实现了该系统。
Control system is designed and two pieces of microprocessor 8031 are used to implement it.
论述压延革生产线轧辊温度的微机自适应控制系统数学模型。
The mathematic model for the computer adaptive control system of roller temperature of the leather rolling production line is established.
本文导出了适用于这类系统的一种模型参考自适应控制系统。
In the paper, a new configuration of model reference adaptive control (MRAC) is developed for this kind of system.
基于混沌变量，提出一种神经网络自适应控制系统的优化设计方案。
In this paper, the optimization design for self-adaptive control system of feed-forward neural network is proposed based on chaotic variable.
就输入存在饱和特性的离散时间参考模型自适应控制系统进行了探讨。
This paper researches the adaptive control system of discrete time reference model of input saturation character.
对动态电阻点焊自适应控制系统中存在的提前触发问题进行了实验研究。
In this paper, the problem of pre-trigger existing in dynamic spot welding self-adaptive control system is researched on the basis of experiments.
证明了自适应控制系统的所有信号全局一致有界，调节误差渐近收敛到零。
It is proved that all the signals in the adaptive control system are globally uniformly bounded, and the regulation error converges to zero asymptotically.
本文论述了连续刚构桥结构分析方法、自适应控制系统的理论和控制方法。
The structural analysis method of the continuous rigid frame bridge and the theories of adaptive control system and method of control were discussed in this paper.
本文将焦炉作为一类混合系统，研究并开发了焦炉加热智能自适应控制系统。
In this paper, the coke oven is thought as a kind of hybrid systems, the coke oven heating intelligent adaptive control system is developed.
与传统的PID控制相比较，结果表明自适应控制系统优于PID控制系统。
Compared with the traditional PID electrode regulator system of EAF, the simulating results show the advantage of self-adaptive control system.
结果证明，单通道、双通道、四通道自适应控制系统的设计均是正确合理的。
The results show that adaptive system design of our single channel, dual-channel, four-channel are correct and reasonable.
然后应用一种改进的模糊神经网络自适应控制系统，设计了TCBR的控制器。
Then, applying adaptive control system based on improved fuzzy neural network, a TCBR controller is designed.
提出了设计模型参考自适应控制系统的新方案，该方案使系统具有强的鲁棒性；
A new design scheme for model reference adaptive control system is presented. This design scheme makes the system possess strong robustness.
本文主要介绍这种非线性自适应控制系统及其外回路航迹跟踪控制器的设计问题。
This paper presents the design method of this type of nonlinear adaptive control system and its out loop trajectory tracking controller.
为保证双机架可逆冷轧机轧制中带钢恒张力，设计了恒张力简单自适应控制系统。
A simple adaptive control system was designed for constant tension of double stand Revere cold rolling mill.
本文基于李亚普诺夫稳定性理论，提出了一种参数补偿的模型参考自适应控制系统。
Based on Liapunov's stability theory, this paper puts forward a model reference adaptive control system with parameter compensation.
分散PID功能模型可以广泛应用于滑模控制系统、自适应控制系统和内模控制系统。
The distributed PID function model can be widely used in sliding-mode control system, self-adaptive control system and internal-mode control system.
自适应控制系统具有较低的自适应增益和较小的控制输入以避免输入饱和和振荡现象。
It is important to note that the adaptive scheme USES lower adaptive gains and smaller control inputs to avoid input saturation and oscillatory behavior.
探讨了关于非最小相位系统的参考模型自适应控制系统（MRACS）的一种设计方法。
This paper is concerned with a design of a model refenrence adaptive control system (MRACS)for a nonminimum phase system.
根据李雅普·诺夫稳定性理论，文中证明了这种分散自适应控制系统全局稳定的充分条件。
Based on Lyapunov stability theory, the sufficient condition for the global stability of the decentralized adaptive control system is proved.
理论分析和仿真结果表明所设计的自适应控制系统具有良好的伺服跟踪性能和随机调节性能。
Theory analysis and the result of simulations show that the scheme possess simultaneously both good behavior of servo tracking and stochastic regulation in adaptive control system of our design.
为了保证冷轧机轧制中带钢恒张这一特点，设计了四辊可逆冷轧机恒张力混合自适应控制系统。
A constant force hybrid adaptive control system is designed for four rollers cold rolling mill to ensure that strap steel force is constant.
本论文研究的是模糊pid复合自适应控制系统在包钢连铸机结晶器液位控制中的设计及应用。
This paper mainly researches the design and application of the Fuzzy-PID complex compound adaptive control method for the continuous casting mould level control in Baotou steel corporation.
在此基础上，作者提出了直流电传动机车的控制型粘控系统的设计方案，即粘着自适应控制系统。
Based on these, the author puts forward a design concept in relation to the controlling type of adhesion control on locomotive, that is, the self adaptive concept.
建立车削加工过程的模糊自适应控制系统，以恒切削力为控制指标，设计了车削加工过程模糊控制器。
A fuzzy self-adaptable control system is established. By setting the constant cutting force as the control objective, a fuzzy controller for the turning process is designed.
结果表明所建立的模糊自适应控制系统能够以较高的辨识与控制精度实现数控加工的智能自适应控制。
Simulation analysis proves that the fuzzy adaptive control system is able to realize intelligent control of NC machining with higher identification as well as control precision.
针对实际工业生产过程中的非线性、时变不确定性，提出了一种基于线性化误差模型的自适应控制系统。
In order to overcome the nonlinearity and time-varying uncertainty of actual industrial processes, an adaptive control system based on linearization error model is proposed.
在此基础上进行了电弧炉电极调节自适应控制系统的设计，推导出了递推的离散时间模型参考自适应律。
Based on this the design of arc furnace electrode regulator adaptive control system is made, the rule of discrete-time model reference adaptive control is proven.
在此基础上进行了电弧炉电极调节自适应控制系统的设计，推导出了递推的离散时间模型参考自适应律。
Based on this the design of arc furnace electrode regulator adaptive control system is made, the rule of discrete-time model reference adaptive control is proven.
应用推荐