同时具体设计了自动焊机的硬件系统和软件系统。
At the same time, the hardware system and software system of automatic bonder are specifically designed.
针对磁放大器式电源埋弧自动焊机设计了单片机控制系统。
A control system based on single chip microprocessor is designed for submerged arc welder with magnetrol power source.
同操作机和悬挂式自动焊机组成自动焊接中心，实现联动工作。
With operation machine and hanging automatic welding machine composition automatic welding center, realization linkage work.
研制开发出一种单片机控制的新型IG BT逆变埋弧自动焊机。
A new IGBT inverter control by SCM for submerged arc welding is developed.
焊接设备方面我们配备有管板自动焊机两台及其它各类焊机近百台。
About welding equipment we have two tube sheet welding machines and hundreds of all types of welding machines.
结果表明：这种新型的大功率埋弧逆变自动焊机有着广阔的应用前景。
The result shows that this newfashioned high-power machine of submerged-arc welding inverter has wide prospect of application.
针对高压空气环境的特殊性，研制了高压焊接试验舱和钨极氩弧自动焊机。
Aiming at special demands under high air ambient pressures, this paper developed the hyperbaric welding test chamber and the automatic GTAW machine.
本文介绍一种SCR整流埋弧自动焊机电源及送丝控制，单片机应用系统。
The SCR Rectifier Auto-SAW power source and wire feeder with single chip computer control is introduced in this paper.
本公司还可为用户设计，生产各类纵缝自动焊机，环缝自动焊机等专用焊接设备。
The company can also design and manufacture all kinds of specialized welding machines, such as automatic longitudinal seam welder, circular seam welder etc.
PAW2000管道全位置自动焊机是管道环缝焊接的专用自动设备，自动化程度高，运行条件恶劣。
Pipeline all - position automatic welder is kind of special automatic machine for pipeline girth welding. It has high degree of automatization, and can be used in severe conditions.
本文研究了一种全新的管道全位置自动焊机的结构、控制设计方案，并对自动化焊接系统进行了深入的研究。
This paper has offered a kind of design project, which is used in the structure and control of a new all-position automatic welding machine, and has carefully studied its automatic welding system.
详细介绍了自动弧焊机的安装方法，区别于半自动焊机安装的地方，包括焊接夹具的安装以及焊接小车的安装。
It introduces the installation method of this welder in detail and the difference between semi-automatic welder about installation, including installation of welding jig and welding carriage.
介绍了MZE- 630埋弧自动焊机的基本原理与结构，焊机操作与维护，焊机常见故障、产生原因和排除方法。
And it also introduces the basic principle and structure, operation and maintenance, common problems, troubleshooting and solutions of MZE-630 automatic submerged arc welding machine.
详细分析了此现象的产生原因和故障排除方法，并列出了MZ-1-1000埋弧自动焊机的常见故障、可能原因和排除方法。
The paper expounds the reasons and the trouble shooting method of the phenomenon, and list the common breakdown, reason and troubleshooting measurement of MZ-1-1000 SAW machine.
灾际使用表明，该焊机自动化程度高、焊接质量好、生产效率高。
The practical application shows that the welding machine has high automation level, fine welding quality and high Production efficiency.
该焊机已成功地应用于锅炉封头相贯线接缝的自动焊接生产中。
The welding machine has been successfully applied to the automatic welding production of end for boiler.
使焊机具有参数预置、规范销定、数字显示及自动引弧和收弧等功能。
The developed welder has many advantages such as specification parameters preseting, locking, digital display, and automatic arc starting and stopping functions.
电源电压列在“主要性能参数”表中，在一般情况下，焊机内的电压自动补偿电路将保证焊接电流保持在允许的范围。
Supply voltage in the "main performance parameters" in the table, under normal circumstances, the welding voltage compensation circuit will guarantee automatic welding current to keep the scope.
全自动绕线机、全自动氩弧焊、自动铆接点焊机、自动超声波测试机、全自动生产线、工业机器人、机器人自动生产线线。
Automatic winding machines, spot welding machine automatic riveting, automatic ultrasonic testing machine, automatic production lines, industrial robots, robot line automatic production line.
点焊机器人的应用是一门自动化程度较高的焊接技术，正在不断得到推广应用。
The application of spot welding robot is a sort of welding technique with higher automatic level.
管道全位置自动内焊机适用于大口径管道焊接施工过程中组对管口、完成根焊。
Pipeline inner loop welder is applicable for big-caliber pipeline welding in construction procedure to joint the ends of pipes and fulfill roots welding.
为提高弧焊机器人的适应性和自动规划功能，研究了一种空间全位置焊接条件下的焊炬姿态自动规划系统。
In this paper, an automatic torch pose planning system for all position welding has been developed, for the purpose of improving flexibility and automatic planning ability of arc welding robot.
根据某厂电冰箱散热器排焊机的自动化焊接要求，对散热器焊接进给系统进行了机构设计。
According to the automated weld requirement on the rowing welding machine of refrigerator heatsink of a factory, the mechanism of the feeding system was designed.
介绍了新型立柱式全自动管板氩弧焊机的结构特点、工作原理、主要部件和焊接的使用效果。
This paper introduces structure feature, principle, important components and welding effect of vertical automatic pipe-plateargon arc welding machine.
介绍了新型单柱式全自动管板氩弧焊机的结构特点、工作原理、主要部件和焊接的使用效果。
This article introduces the characteristic, working principle, main parts and the welding efficiency of the new single-pole pipe-board auto inert gas arc welding machine.
用AT89C2051单片机制作一点焊机控制器，具有自动重复点焊及报警功能。
The controller of spot welder made by single slice computer AT89C2051. It can repeat spot welding and warn automatically.
讨论了可控硅逆变式半自动MIG焊机研制的主要技术问题。
The main techniques of SCR inverter semi-automatic MIG welding machine are discussed in this paper.
利用可编程序控制器（PLC）控制步进电机和电焊机，实现T型管道接头焊接的自动化控制。
The PLC controlled system which is used to control step-motor and electric welding machine is introduced in this paper, and automatic control of T-type channel Joints is realized.
利用可编程序控制器（PLC）控制步进电机和电焊机，实现T型管道接头焊接的自动化控制。
The PLC controlled system which is used to control step-motor and electric welding machine is introduced in this paper, and automatic control of T-type channel Joints is realized.
应用推荐